This is the second interim report of the research project "Information Society, Work and the Generation of New Forms of Social Exclusion" (SOWING). It is based on a firm survey conducted in the eight regions participating in the research project — Flanders (Belgium), Lazio (Italy), Niederösterreich (Austria), Portugal, the Republic of Ireland, the Stuttgart area (Germany), the Tampere region (Finland) and the West London area (U.K.). The aim of this report is to present a broad overview of the collected data. In general, only simple statistical methods have been applied. The report focuses on a regional comparison; however, the data have also been analysed by firm size, measured by quantity of staff, and industrial sector. It should be seen as a first step in the data analysis; it may also give some hints for a more strategic analysis of the survey data.

The project started in 2009 with the support of DAAD in Germany and CRUP in Portugal under the “Collaborative German-Portuguese University Actions” programme. One central goal is the further development of a theory of technology assessment applied to robotics and autonomous systems in general that reflects in its methodology the changing conditions of knowledge production in modern societies and the emergence of new robotic technologies and of associated disruptive changes. Relevant topics here are handling broadened future horizons and new clusters of science and technology (medicine, engineering, interfaces, industrial automation, micro-devices, security and safety), as well as new governance structures in policy decision making concerning research and development (R&D).

The main objective of the paper is to provide a synopsis of global scenario and forecasting surveys. First, the paper will give an overview on existing global scenario and forecasting surveys and their specific scenario philosophies and storylines. Second, the major driving forces that shape and characterise the different scenarios will be identified. The scenario analysis has been provided for the research project Risk Habitat Megacity (HRM) that aims at developing strategies for sustainable development in megacities and urban agglomerations. The analysis of international scenario surveys is an essential component within RHM. The scenario analysis will be the basis and source for the development of own RHM-framework scenarios and for defining specific driving forces of change.

This study was produced for the “Study of Instruments and Tools to anticipate the effects of industrial change on employment, trades and vocational qualifications” and for DG V (Employment) of the European Commission in the late 1994. It started when the previous Portuguese government was still ruling, the main policies were defined, and the available instruments were not used in a minimum extend. The new Government, issued from the 1995 elections, proposed “employment” as a major objective with horizontal responsibility. That’s also why there is now a Ministry for Qualifications and Employment, and another one for Solidarity and Social Affairs, not one for Employment and Social Affairs as the previous Government had. But more than that, this objective is considered to need a coordinated and consistent action that involves external affairs, industrial and regional policies, and the policies on education, training and employment, among others. The promotion of the “quality of employment” is being recently done at the working conditions, remuneration, social protection, occupational promotion levels, and the equality of opportunities towards employment and vocational training levels, and finally, the levels of qualification of human resources for a better labour market, education policy and training policy developments. In Portugal, the influence of the industrial change is produced in a top-down way; with (in some cases) an ex post analysis process to formulated training needs. This means that the industrial change impact is produced (normally, unexpectedly), and afterwards the responsible at the company level tries to know which training needs should be formulated in order those effects could be the smoother possible. The training needs at the company level is not based on anticipatory studies, neither is done any long term forecast on qualification, or even employment level.

The present article posits constructive technology assessment as the dominant perspective of societal embedding practices in the technical development process by the high-speed train manufacturing industry, resulting from a research study conducted in 2011 (Moretto 2011). The article covers the main elements of the study, being the high-speed train manufacturing industry’s strategic intelligence, technology pattern, knowledge exchange, technology trajectories; and finally presents the arguments justifying constructive technology assessment as the dominant approach.

The design of work organisation systems with automated equipment is facing new challenges and the emergence of new concepts. The social aspects that are related with new concepts on the complex work environments (CWE) are becoming more relevant for that design. The work with autonomous systems implies options in the design of workplaces. Especially that happens in such complex environments. The concepts of “agents”, “co-working” or “human-centred technical systems” reveal new dimensions related to human-computer interaction (HCI). With an increase in the number and complexity of those human-technology interfaces, the capacities of human intervention can become limited, originating further problems. The case of robotics is used to exemplify the issues related with automation in working environments and the emergence of new HCI approaches that would include social implications. We conclude that studies on technology assessment of industrial robotics and autonomous agents on manufacturing environment should also focus on the human involvement strategies in organisations. A needed participatory strategy implies a new approach to workplaces design. This means that the research focus must be on the relation between technology and social dimensions not as separate entities, but integrated in the design of an interaction system.

In this working paper are present the main provisional results of the first round of a Delphi survey held in Portugal on the automotive sector. It was done under the WorTiS project, developed by IET – Research Centre on Enterprise and Work Innovation, and financed by the Portuguese Ministry of Science and Technology. The majority of experts consider to have an average of less knowledge in almost all the scenario topics presented. Nevertheless, we considered specially the topics where the experts considered themselves to have some knowledge. There were no “irrelevant” topics considered as such by the expert panel. There are also no topics that is not considered a need for co-operation (that happens in jus tone case). The lack of technological infra-structrures was not considered as an hindered factor for the accomplishement of any scenario. The experts panel considered no other international competence besides US, Japan or Germany in these topics. Although the members of the expert panel were not as many as needed, These situations will be taken into consideration for a second round of the Delphi survey

The summer school “Renewable Energy Systems: Role and Use of Parliamentary Technology Assessment” was the first European Summer School with a pure focus on technology assessment. The aim of the three-day long summer school of the European project Parliaments and Civil Society in Technology Assessment (PACITA) was to create awareness of the potential of technology groups in Europe. Therefore, the summer school involved keynotes, practical exercises, mutual reflection, cutting edge training and networking to deal with the theme of renewable energy systems out of the perspective of Technology Assessment (TA), to meet transition objectives or to critically assess energy technologies.

Currently distributed business process (re) design (resulting in components of business networks) basically relies on technical criteria. And that are the main purposes of most research projects supported by EC. Through the process of building a European Research Area, this means a strong influence in the national research programmes. However it is generally accepted that it should also take into account social criteria and aspects such as the quality of working life, or participation in decision processes. Those were some of the objectives of projects in de 80s decade, and framed some of the main concepts and scientific approaches to work organisation. The democratic participation of network and organisations members in the design process is a critical success factor. This is not accepted by everyone, but is based in sufficient case studies. Nevertheless, in order to achieve an optimization that can satisfying the requirements of agility of a network of enterprises, more complex design methods must be developed. Thus, the support to the collaborative design of distributed work in a network of enterprises, through a concurrent approaching business processes, work organisation and task content is a key factor to achieve such purposes. Increasing needs in terms of amounts of information, agility, and support for collaboration without time and space constrains, imposes the use of a computer-based model.

At the beginning of the 21st century there are new expectations and challenges towards Technology Assessment (TA). Among these there is a new awareness on TA issues in education, in particular at universities. While TA was mainly an activity at extra-universitarian research institutions for a long time now there are new developments and initiative towards integrating TA issues in university courses. We will first give an insight into the international development. Secondly we will focus on the “TA and education” landscape in Germany and Portugal in more detail, followed by a description of new and emerging forms of cooperation between Portugal and Germany in this field which might serve as a model or an example for further cooperation between other partners.

In this paper it is analysed the relationships between work organisation and quality systems in firms that uses some forms of advanced automation. Are characterised the existing quality control structures in the Portuguese industry, and the main factors that hidden or fosters the development of sociotechnical methods of quality control organisation strategies. Are analysed some industrial cases that explains more clearly the critical issues of the implementation of quality systems and work organisation systems. A few recommendations are given about the possibilities for the development of new forms of work organisation and the quality systems associated to automated manufacturing systems.

The present communication analyses the relationships between work organisation and quality systems. The analysis is based on results from a study funded by the "Specific Programme for the Development of Portuguese Industry" (PEDIP). The main issues which have been currently associated with work organisation and quality control in the Portuguese industry are characterized. Critical features related to the implementation of quality systems and new methods of work organisation for industrial development are also discussed. A few recommendations are given in order to promote appropriate methods of work organisation for quality improvement within Portuguese industry.

Nesta comunicação em que se discutem, numa perspectiva de complementaridade, os conceitos de qualificação e de competência profissional, dá-se conta da metodologia adoptada para a identificação e validação de um conjunto de competências profissionais num sistema complexo de trabalho. O estudo incidiu sobre os Serviços de Controlo de Tráfego Aéreo da Região de Informação de Voo de Lisboa e permitiu concluir pela existência de uma dimensão integrativa das componentes trabalho e tecnologia, enquanto elementos estruturantes dos mapas de competências profissionais, indispensáveis à integração sistémica dos diferentes agentes (humanos e tecnológicos) no processo produtivo.

This report is the result of the presentation of the Thesis Plan, performed on December 13, 2011, during the activities of the Winter School of Doctoral Program in Technology Assessment. It is intended to describe the main information about the Thesis Plan and also the definition of the main concepts involved. Can also view the presentation file that is available on the page of the student's PhD thesis Ana Cândido in Moodle (http://moodle.fct.unl.pt/mod/resource/view.php?inpopup=true&id=157805). The following step in this report will be the development of the discipline of “Project IV” and so also the preparation for Doctoral Conference will take place in June 2012.

Algunos de los fenómenos donde el concepto de “globalización” es aplicado incluyen la internacionalización de los mercados, la globalización de la cultura, el dominio político hegemónico del mundo por algunos estados poderosos, o grupos de estados, el poder creciente de organismos supranacionales, y el desarrollo de una división global de trabajo. De acuerdo con Radice, la globalización é generalmente definida como “un proceso a través de lo cual una proporción creciente de transacciones económicas, sociales e culturales ocurre directamente o indirectamente entre partners de países distintos” (Radice, 2004: 154). Un ponto de partida para entender la división global del trabajo debe ser la investigación de los modos como las empresas se reestructuran, una vez que son los actores-llave en la decisión sobre que trabajo debe ser encontrado y donde. Las “cadenas de valor” descriven cada etapa en el proceso productivo de un producto o un servicio final. La palabra “valor” en la frase “cadena de valor” dice respecto al valor añadido. Cada etapa en la cadena de valor implica recibir inputs, procesarlos, y entonces pasarlos a la unidad siguiente en la cadena, con el valor que está sendo adicionado no proceso. As unidades separadas da cadena de valor pueden estar dentro da misma empresa (in-house) o en distintas empresas (outsourced). Similarmente pueden estar en un mismo local, o en otra localización. La normalización de muchos procesos del negocio, combinada con la digitalización da información y el desarrollo de redes de telecomunicaciones de elevada capacidad ha tornado posible el trabajo tele-mediado, pudiendo este ser externalizado y/o re-localizado, conduciendo à introducción de una división de trabajo internacional no trabajo de procesamiento de información. Esta comunicación presentará algunos resultados derivados do proyecto europeo WORKS, donde son estudiados casos portugueses de empresas que justamente se integran en cadenas de valor globalizadas, sendo analizadas

Algunos de los fenómenos donde el concepto de “globalización” es aplicado incluyen la internacionalización de los mercados, la globalización de la cultura, el dominio político hegemónico del mundo por algunos estados poderosos, o grupos de estados, el poder creciente de organismos supranacionales, y el desarrollo de una división global de trabajo. De acuerdo con Radice, la globalización é generalmente definida como “un proceso a través de lo cual una proporción creciente de transacciones económicas, sociales e culturales ocurre directamente o indirectamente entre partners de países distintos” (Radice, 2004: 154). Un ponto de partida para entender la división global del trabajo debe ser la investigación de los modos como las empresas se reestructuran, una vez que son los actores-llave en la decisión sobre que trabajo debe ser encontrado y donde. Las “cadenas de valor” descriven cada etapa en el proceso productivo de un producto o un servicio final. La palabra “valor” en la frase “cadena de valor” dice respecto al valor añadido. Cada etapa en la cadena de valor implica recibir inputs, procesarlos, y entonces pasarlos a la unidad siguiente en la cadena, con el valor que está sendo adicionado no proceso. As unidades separadas da cadena de valor pueden estar dentro da misma empresa (in-house) o en distintas empresas (outsourced). Similarmente pueden estar en un mismo local, o en otra localización. La normalización de muchos procesos del negocio, combinada con la digitalización da información y el desarrollo de redes de telecomunicaciones de elevada capacidad ha tornado posible el trabajo tele-mediado, pudiendo este ser externalizado y/o re-localizado, conduciendo à introducción de una división de trabajo internacional no trabajo de procesamiento de información. Esta comunicación presentará algunos resultados derivados do proyecto europeo WORKS, donde son estudiados casos portugueses de empresas que justamente se integran en cadenas de valor globalizadas, sendo analizadas

The aim of the TeleRisk Project on labour relations and professional risks within the context of teleworking in Portugal – supported by IDICT – Institute for Development and Inspection of Working Conditions (Ministry of Labour), is to study the practices and forms of teleworking in the manufacturing sectors in Portugal. The project chose also the software industry as a reference sector, even though it does not intend to exclude from the study any other sector of activity or the so-called “hybrid” forms of work. However, the latter must have some of the characteristics of telework. The project thus takes into account the so-called “traditional” sectors of activity, namely textile and machinery and metal engineering (machinery and equipment), not usually associated to this type of work. However, telework could include, in the so-called “traditional” sectors, other variations that are not found in technologically based sectors. One of the evaluation methods for the dynamics associated to telework consisted in carrying out surveys by means of questionnaires, aimed at employers in the sectors analysed. This paper presents some of the results of those surveys. It is important to mention that, being a preliminary analysis, it means that it does not pretend to have exhausted all the issues in the survey, but has meant that it shows the bigger tendencies, in terms of teleworking practices, of the Portuguese industry.

The aim of the TeleRisk Project on labour relations and professional risks within the context of teleworking in Portugal – supported by IDICT – Institute for Development and Inspection of Working Conditions (Ministry of Labour), is to study the practices and forms of teleworking in the manufacturing sectors in Portugal. The project chose also the software industry as a reference sector, even though it does not intend to exclude from the study any other sector of activity or the so-called “hybrid” forms of work. However, the latter must have some of the characteristics of telework. The project thus takes into account the so-called “traditional” sectors of activity, namely textile and machinery and metal engineering (machinery and equipment), not usually associated to this type of work. However, telework could include, in the so-called “traditional” sectors, other variations that are not found in technologically based sectors. One of the evaluation methods for the dynamics associated to telework consisted in carrying out surveys by means of questionnaires, aimed at employers in the sectors analysed. This paper presents some of the results of those surveys. It is important to mention that, being a preliminary analysis, it means that it does not pretend to have exhausted all the issues in the survey, but has meant that it shows the bigger tendencies, in terms of teleworking practices, of the Portuguese industry.

The objective of the paper is to contribute to the understanding of the knowledge economy in Portugal, presenting data and revealing specific characteristics of the Portuguese business R&D, using a framework of available tools such as international comparisons, technology intensity and sectors of the economy. This study concludes that Portuguese business R&D expenditures reveals strong elements of economic terciarization, and an important presence of foreign direct investment in knowledge intensive industries. Furthermore, the study revealed less significant determinants such as the existence of skill labour in pharmaceutical industries and the role of the state in some sectors (wealth and rail transportation).

This paper aims to present the main events over the years on public policies for financing R & D in Portugal, with special focus on the QREN (National Strategic Reference Framework). Between 2007 and 2013, is the QREN which provides the framework to be applied to economic policy in Portugal. The Incentives System for Companies Investment is one of the key instruments of economic promotion policies, particularly in terms of promoting innovation and regional development. The review made shows us that there is not still a systemic and integrated policy innovation in Portugal, but there is a set of instruments that can play a role in this policy and also has missed coherence and coordination between them.

There is an increasing importance of different productive architectures related to worker involvement in the decision making, where is given due attention to the intuitive capabilities and the human knowledge in the optimization and flexibilization of manufacturing processes. Thus having reference point architecture of a flexible manufacturing and assembling system existent at UNINOVA-CRI, we will present some exploratory hypothesis about applicability of the concept of hybridization and its repercussions on the definition of jobs, in those organizations and in the formation of working teams.

In this paper is analyzed the work organization and the forms of quality control in a robotic welding station in a company of office equipment and metal components manufacturing. The robotic cell is recent and works in two shifts. Quality and production rationalization implied in this firms the adoption of a strategy of organization of teamwork, and it is supported the collaborative tools to decrease the possibilities for errors and to improve means and methods of manufacturing. The analysis of quality control process needed the use of productivity indicators. In this way it was possible to understand the connections between the function quality and the new form of work organization adopted in this innovative experience in Portugal.

In this work we propose the use of Social Network Analysis to understand the positioning of the concept of Open Innovation in the literature, offering thereby a complementary approach to existing literature review up to now. The main motivation of this network analysis is to contribute to the understanding of the concept of Open Innovation, with its spread to different areas of knowledge over the years and its relationship with other concepts in the literature. Some 403 articles published in the database of the Science Direct during the years 2003 to 2011 were analyzed. The data was collected separately by year, considering the following information: journals in which the articles were published; countries of origin of the articles’ authors, keywords of these articles and year of publication. The results reveal the intense growth of the use of the words "Open Innovation" in articles from different areas of knowledge, as well as its increasing interconnection with other concepts, allowing the understanding of its diffusion in the literature.

No abstract is available for this item.

This paper is based in a report for the international project “GERPISA-Labour Relations” on the concept of leader-factory, and in other papers written after that using the case study of the Renault factory in the Aveiro region. This case study is articulated with other studies on engine factories of the same company in Spain, France and Mexico. That study has been co-ordinated by Prof. Juan José Castillo (Univ. Complutense Madrid, Spain). Here we present the results of this empirical research from where were developed the first indicators of a discussion on the concept of new production models and leader-factory that have been studied by the GERPISA international network.