This paper analyses the problems and trends of the introduction of anthropocentric production systems (APS) in small less industrialized member states of the European Union, specifically the case of Portugal, based on the report for the FAST-Anthropocentric Technology Assessment Project (Monitor Programme) on “Prospects and conditions for APS in Europe by the 21st century”. Research teams from all countries of the European Community, as well as researchers from USA, Japan and Australia were participating in this project. The aim of this paper is to characterize APS and to present some special considerations related to the socioeconomic factors affecting the prospects and conditions for APS in Portugal. APS is defined as a system based on the utilization of skilled human resources and flexible technology adapted to the needs of flexible and participative organization. Among socioeconomic factors, some critical aspects for the development of APS will be focused, namely technological infrastructure, management strategies, perceived impact of introduction of automated systems on the division of labor and organizational structure, educational and vocational training and social actors strategies towards industrial automation. This analysis is based on a sample of industrial firms, built up for qualitative analysis, and on case studies analysis that can be reference examples for further development of APS, and not just for economic policy purposes alone. We have also analyzed the type of existing industrial relations, the union and employer strategies and some aspects of public policies towards the introduction of new technologies in the order to understand the extent to which there exist obstacles to and favorable conditions for the diffusion of anthropocentric systems. Finally some recommendations are presented to stress the trends for the implementation and development of anthropocentric production systems in Portugal.

In this paper it is analysed the relationships between work organisation and quality systems in firms that uses some forms of advanced automation. Are characterised the existing quality control structures in the Portuguese industry, and the main factors that hidden or fosters the development of sociotechnical methods of quality control organisation strategies. Are analysed some industrial cases that explains more clearly the critical issues of the implementation of quality systems and work organisation systems. A few recommendations are given about the possibilities for the development of new forms of work organisation and the quality systems associated to automated manufacturing systems.

This paper is based on a study about the Setúbal region, included in the internacional project “The Future of Industry in Europe” for the programme FAST-MONITOR of the European Community (1992-94). There were some information on the project VW/Ford for this region and those that are connected with research networks on industrial sectors (specially, on the automobile industry), and the network on the spatial and regional factors of regional development. Those studies allowed the scenario development on evolution trends of European industry and, specifically, on the automobile sector, and on the Setúbal region that was studied by the Portuguese team.

This paper analyses the problems and trends of the introduction of anthropocentric production systems (APS) in small less industrialized member states of the European Union, specifically the case of Portugal, based on the report for the FAST-Anthropocentric Technology Assessment Project (Monitor Programme) on “Prospects and conditions for APS in Europe by the 21st century”. Research teams from all countries of the European Community, as well as researchers from USA, Japan and Australia were participating in this project. The aim of this paper is to characterize APS and to present some special considerations related to the socioeconomic factors affecting the prospects and conditions for APS in Portugal. APS is defined as a system based on the utilization of skilled human resources and flexible technology adapted to the needs of flexible and participative organization. Among socioeconomic factors, some critical aspects for the development of APS will be focused, namely technological infrastructure, management strategies, perceived impact of introduction of automated systems on the division of labor and organizational structure, educational and vocational training and social actors strategies towards industrial automation. This analysis is based on a sample of industrial firms, built up for qualitative analysis, and on case studies analysis that can be reference examples for further development of APS, and not just for economic policy purposes alone. We have also analyzed the type of existing industrial relations, the union and employer strategies and some aspects of public policies towards the introduction of new technologies in the order to understand the extent to which there exist obstacles to and favorable conditions for the diffusion of anthropocentric systems. Finally some recommendations are presented to stress the trends for the implementation and development of anthropocentric production systems in Portugal.

In this paper is analyzed the work organization and the forms of quality control in a robotic welding station in a company of office equipment and metal components manufacturing. The robotic cell is recent and works in two shifts. Quality and production rationalization implied in this firms the adoption of a strategy of organization of teamwork, and it is supported the collaborative tools to decrease the possibilities for errors and to improve means and methods of manufacturing. The analysis of quality control process needed the use of productivity indicators. In this way it was possible to understand the connections between the function quality and the new form of work organization adopted in this innovative experience in Portugal.

In this paper is analyzed the work organization and the forms of quality control in a robotic welding station in a company of office equipment and metal components manufacturing. The robotic cell is recent and works in two shifts. Quality and production rationalization implied in this firms the adoption of a strategy of organization of teamwork, and it is supported the collaborative tools to decrease the possibilities for errors and to improve means and methods of manufacturing. The analysis of quality control process needed the use of productivity indicators. In this way it was possible to understand the connections between the function quality and the new form of work organization adopted in this innovative experience in Portugal.

In the last two decades (70 and 80) there took place an intensive controversy in the field of Industrial and Work Sociology. There the topic of the study object of this scientific discipline is again discussed. This controversy, however, has a relatively different sense in comparison with the one that existed in early 60ies. The more recent one followed the increasing number of possibilities of electronical equipment for data processing at the same time its price is decreasing. In this article we try to give knowledge of the main elements that take part in such debate. It is also important to present the international character of the research developed in association with this discussion. It evolves a plurality of research teams that present, compare and synthesize the results of empirical studies that are applied for a wide variety of countries.

In the last two decades (70 and 80) there took place an intensive controversy in the field of Industrial and Work Sociology. There the topic of the study object of this scientific discipline is again discussed. This controversy, however, has a relatively different sense in comparison with the one that existed in early 60ies. The more recent one followed the increasing number of possibilities of electronical equipment for data processing at the same time its price is decreasing. In this article we try to give knowledge of the main elements that take part in such debate. It is also important to present the international character of the research developed in association with this discussion. It evolves a plurality of research teams that present, compare and synthesize the results of empirical studies that are applied for a wide variety of countries.

The design of jobs is defined and its different implications. These aspects must be taken into consideration when applied to new automated systems, once it can occur workers in-adaptations to certain type of activity and tasks. Other concepts that emerge from this are the mental workload, stress, work accidents, shift work, or the physical environment that can reveal to become determinant in the process of job design. That means also the organizational design. In this sense, the manufacturing, organizational and individual dimensions, are the most meaningful in the mentioned process of organizational design. Are analyzed different application cases of robotized systems and their social effects, mostly those that are related to the dimensions of working conditions. Are particularly analyzed the new risk situations that occur with the use of robotic systems. One concludes on the need to take into consideration qualitative variables in the definition and design of robotic cells, jobs and production systems. This consideration influences directly in the labor productivity, in such way that the development of these methodologies of analysis can be considered as integrating the processes of technological innovation in manufacturing.

The design of jobs is defined and its different implications. These aspects must be taken into consideration when applied to new automated systems, once it can occur workers in-adaptations to certain type of activity and tasks. Other concepts that emerge from this are the mental workload, stress, work accidents, shift work, or the physical environment that can reveal to become determinant in the process of job design. That means also the organizational design. In this sense, the manufacturing, organizational and individual dimensions, are the most meaningful in the mentioned process of organizational design. Are analyzed different application cases of robotized systems and their social effects, mostly those that are related to the dimensions of working conditions. Are particularly analyzed the new risk situations that occur with the use of robotic systems. One concludes on the need to take into consideration qualitative variables in the definition and design of robotic cells, jobs and production systems. This consideration influences directly in the labor productivity, in such way that the development of these methodologies of analysis can be considered as integrating the processes of technological innovation in manufacturing.

The analysis on the technological and organizational change in the European industry, and particularlly the Portuguese one, has been studied at CESO I&D since its foundation on 1988. Few time after that, started a development project that started from a previous research project on the same topics, and supported by JNICT (Ministry of Science). In that projecto we continued to process data that was then not possible to do in the first one. It was then possible to continue a research programme that was urgent and determinant in the field of industrial sociology in Portugal. It focus again on the processes of technological and organizational change in the manufacturing industry.

The analysis on the technological and organizational change in the European industry, and particularlly the Portuguese one, has been studied at CESO I&D since its foundation on 1988. Few time after that, started a development project that started from a previous research project on the same topics, and supported by JNICT (Ministry of Science). In that projecto we continued to process data that was then not possible to do in the first one. It was then possible to continue a research programme that was urgent and determinant in the field of industrial sociology in Portugal. It focus again on the processes of technological and organizational change in the manufacturing industry.