The last decades have shown an increasing amount of research into expectations of science and technology. Especially for emerging technologies, expectations held by different stakeholder are guiding the direction of research and development. In this article the results of an investigation into the expectations of specific actors regarding the development of emerging battery technology for applications in the power grid are presented. It is set up as an explorative study within the framework of Constructive Technology Assessment (CTA). A number of studies since the 1990s have indicated a growing need for energy storage options in the power grid, where batteries appear to be capable of providing a range of valuable services to the grid. Cost-effectiveness on a large scale will however require considerable technical improvements. The configuration of energy storage may differ in the specific location and exploitation of the storage assets, as well as in the investments in new storage capacity. In this study the visions and expectations of several relevant actors are analysed using interviews and surveys in terms of expectations of technological development, expectations concerning stakeholder roles, and channels of interaction between the relevant actors. The results indicate a divide in expectations between the user side of the technology (the electric power industry) and the development side (academic researchers). Opinions differ with respect to the obstacles to technological development, the actors relevant in early technological development, and the most suitable channels for interaction between these actors. It follows from the theoretical background that conflicts in expectations provide the opportunity for the acceleration of technological development and adoption through stakeholder participation. Small interactive workshops, where conflicts identified in this paper are discussed, were identified as a suitable channel in order to reach consensus in visions and expectations for battery technology.

In Europe, the technology development of high-speed trains is increasingly exposed to societal needs, driven by ICT advancements, external to traditional design. Together with the liberalisation of the rail markets and increase pressures from other transport modes leads to an unprecedented situation where planers, operators and suppliers of high-speed have to take decision in this complex and competitive environment.
In such broadening of elements influencing design and, thus, product development process, from the survey here to be presented, it was not observed technology options assessment or strategic agenda setting from visions shifting in the same way.
For the high-speed train industry this new trend requires going beyond the visions of the past 15 to 20 years’ practices of “sector endogenous” and structurally closed strategic methods approaches to a broader interaction with the widening of societal actors now capable of being active contributors to innovation from digitalization.
This way to understand the European industry readiness for undertaking such supra systemic challenge, this paper presents the results from a survey conducted by the authors to 74 representatives of the high-speed train innovation chain regarding to which extent societal embedding is considered in the drafting of their visions and technology development projects.
This work becomes even more pertinent if considered that the debate is now open in the railway industry (not exclusive to high-speed trains) as they are launching the joint initiative SHIFT2RAIL, revise ERRAC (the European Rail Research Advisory Council) mandate and enter in a new research cycle with the European research framework Horizon 2020.

In Europe, the technology development of high-speed trains is increasingly exposed to societal needs, driven by ICT advancements, external to traditional design. Together with the liberalisation of the rail markets and increase pressures from other transport modes leads to an unprecedented situation where planers, operators and suppliers of high-speed have to take decision in this complex and competitive environment.
In such broadening of elements influencing design and, thus, product development process, from the survey here to be presented, it was not observed technology options assessment or strategic agenda setting from visions shifting in the same way.
For the high-speed train industry this new trend requires going beyond the visions of the past 15 to 20 years’ practices of “sector endogenous” and structurally closed strategic methods approaches to a broader interaction with the widening of societal actors now capable of being active contributors to innovation from digitalization.
This way to understand the European industry readiness for undertaking such supra systemic challenge, this paper presents the results from a survey conducted by the authors to 74 representatives of the high-speed train innovation chain regarding to which extent societal embedding is considered in the drafting of their visions and technology development projects.
This work becomes even more pertinent if considered that the debate is now open in the railway industry (not exclusive to high-speed trains) as they are launching the joint initiative SHIFT2RAIL, revise ERRAC (the European Rail Research Advisory Council) mandate and enter in a new research cycle with the European research framework Horizon 2020.

The focus of the following article is on the use of new robotic systems in the manufacturing industry with respect to the social dimension. Since “intuitive” human–machine interaction (HMI) in robotic systems becomes a significant objective of technical progress, new models of work organization are needed. This hypothesis will be investigated through the following two aims: The first aim is to identify relevant research questions related to the potential use of robotic systems in different systems of work organization at the manufacturing shop-floor level. The second aim is to discuss the conceptualization of (old) organizational problems of human–robot interaction (HRI). In this context, the article reflects on the limits of cognitive and perceptual workload for robot operators in complex working systems. This will be particularly relevant whenever more robots with different “roles” are to be increasingly used in the manufacturing industry. The integration of such complex socio-technical systems needs further empirical and conceptual research with regard to “social” aspects of the technical dimension. Future research should, therefore, also integrate economic and societal issues to understand the full dimensions of new human–robot interaction in industry today.

The goal of technology assessment (TA) is to lend support to society and policy making by promoting understanding of the problems related to the grand sociotechnical challenges of our time, as well as to assess the available options for managing them. Researchers from Japan and Europe reflected together in this book on country-specific developments to identify the conditions that must be present to anchor TA in science, politics, and society. This book helps us to learn about different cultures.

Technology assessment (TA) had never been treated as a relevant topic within the International Sociological Association (ISA) before. The first steps towards establishing this association were taken in 1948, at the initiative of the Social Science Department of UNESCO. Its formal foundation was in 1949. The World Congress of Sociology in Japan was hopefully the beginning of continuous integration of TA into the thematic sessions within the ISA.

If the question is whether there is a parliamentary technology assessment (PTA) unit in Portugal or Spain, the clear answer is that there is still no such unit at the central state level at the present time, neither in Portugal nor in Spain. The question then has to be modified addressing previous and current efforts to establish PTA and the current framework conditions and opportunities. Practices of PTA are framed here as a democratic innovation in the context of changes in representative democracies. Against this backdrop, the efforts and opportunities to establish PTA in Spain and Portugal are studied. By sketching these developments and outlining the opportunities in these countries, our aim is to contribute to the debate about the likelihood of a new wave of PTA in Europe (Hennen/Nierling 2014).

Technology assessment (TA) had never been treated as a relevant topic within the International Sociological Association (ISA) before. The first steps towards establishing this association were taken in 1948, at the initiative of the Social Science Department of UNESCO. Its formal foundation was in 1949. The World Congress of Sociology in Japan was hopefully the beginning of continuous integration of TA into the thematic sessions within the ISA.

The design of work organisation systems with automated equipment is facing new challenges and the emergence of new concepts. The social aspects that are related with new concepts on the complex work environments (CWE) are becoming more relevant for that design. The work with autonomous systems implies options in the design of workplaces. Especially that happens in such complex environments. The concepts of “agents”, “co-working” or “human-centred technical systems” reveal new dimensions related to human-computer interaction (HCI). With an increase in the number and complexity of those human-technology interfaces, the capacities of human intervention can become limited, originating further problems. The case of robotics is used to exemplify the issues related with automation in working environments and the emergence of new HCI approaches that would include social implications. We conclude that studies on technology assessment of industrial robotics and autonomous agents on manufacturing environment should also focus on the human involvement strategies in organisations. A needed participatory strategy implies a new approach to workplaces design. This means that the research focus must be on the relation between technology and social dimensions not as separate entities, but integrated in the design of an interaction system.

The paper aims to understand the degree of transition towards e-mobility. The assumption is that the degree of convergence between actors of each system (batteries, vehicles, grid, policies, business models and consumers) is an indicator of changes in the present socio-technical regime. After an introduction to the socio-technical transition towards e-mobility, the paper presents and discusses three technology assessment approaches to several projects related to technology, society and politics. There are several thematic crossovers between all projects presented leading to a synergetic technology assessment. This output results from the overlapping areas between the cases and can be used to first assess the extent of changes in the present socio-technical regime, as well as to extract standards and regulations, acceptance/risk analyses and behaviour changes that could be significant in the context of a transition towards electric mobility.

Magnetic resonance imaging (MRI) is a method of image diagnose proven to be of undeniable importance when it comes to neuro and cardio related diseases. In fact, these diseases (such as: ischemic heart disease, stroke and acute myocardial infection) have high incidence in Portugal. For these reasons, the allocation of this medical technology should not be considered with light thoughts. In fact, making decision of resource allocation in health care can be a very complex and contested matter. The impacts of new technology allocation, such MRI, can be assessed in a variety of ways. However, a fundamental component should always be present: the use of evidence-based decision-making methods. One of these methods is Technology Assessment (TA). This paper aims to characterize the equity on access of the Portuguese population in general, to a specific medical device such as MRI, under the TA point of view. It is hoped to promote a bridge of scientific knowledge between the gap on research and policy-making through TA that can emerge as a tool to aid decision-makers in the organization of health systems. There are gaps in providing healthcare, due to geographical imbalances, with some areas unable to provide certain specialized services, as hospitals in the countryside do not provide all medical specialties. Portugal has also a large independent private sector that provides diagnostic and therapeutic services to NHS users under contracts called conventions. These medical contracts cover ambulatory health facilities for laboratory tests and examinations such as diagnostic tests and Radiology. However, there is no convention from the NHS when concerning the MRI exam. Therefore, this reality can be considered a limitation in the access of the general population to this kind of clinical exam. TA can play an useful and important role in helping the decision-makers to explore potential gains that might be achieved by introducing a more rational decision making into health care ma

The social dimension of worker-robot interaction in industry is becoming a decisive aspect of robotics development. Many problems and difficulties of robotics research are not only related to technical issues but framed by social aspects. Human-robot interaction (HRI) as a specific research field of robotics tackles this issue. The debate on social involvement in HRI design of a few decades ago must be re-opened. A start-up project was initiated in 2012 at Karlsruhe Institute of Technology (KIT) to define a new research field and establish a conceptual framework on HRI. It was related to recent developments in the manufacturing industry and professional service robotics. The aim was to cooperate with other research teams to establish an expert network in this field. Special focus was placed on the design of work organisation models and issues of robotics technology design for worker (or operator) and robot interaction. In the current paper we present the most important conclusions from these research activities. –