Ionic liquids have been on the spotlight of chemical research field in the last decades. Their physical properties (low vapor pressure, thermal stability, and conductivity) and the possibility of fine tuning make them a versatile class of compounds for a wide range of applications, such as catalysis, energy, and material sciences. Ionic liquids can establish multiple intermolecular interactions with solutes such as electrostatic, van der Waals, or hydrogen bonds. The prospect of designing ionic liquid structures toward specific applications has attracted the attention to these alternative solvents. However, their rational design demands a molecular detailed view, and Nuclear Magnetic Resonance is a unique and privileged technique for this purpose, as it provides atomic resolution and at the same time enables the study of dynamic information. In this chapter, we provide an overview about the application of Nuclear Magnetic Resonance spectroscopy techniques as a methodology for the rational design of ionic liquids as solvents for small organic compounds, CO2 capture, and polymers such as cellulose focusing mainly in the last 10 years.

In this work, 1H NMR relaxometry and diffusometry as well as viscometry experiments were carried out as a means to study the molecular dynamics of magnetic and non-magnetic ionic liquid-based systems. In order to evaluate the effect of a co-solvent on the super-paramagnetic properties observed for Aliquat-iron-based magnetic ionic liquids, mixtures comprising different concentrations, 1% and 10% (v/v), of DMSO-d6 were prepared and analyzed. The results suggest that, when at low concentrations, DMSO-d6 promotes more structured ionic arrangements, thus enhancing these super-paramagnetic properties. Furthermore, the analysis of temperature and water concentration effects allowed to conclude that neither one of these variables sufficiently affected the super-paramagnetic properties of the studied magnetic ionic liquids.

{Over the past few years porous materials have become a topic of intense research. Porous poly(ionic liquid)s combine the porous architecture with intrinsic ionic liquids properties. In all research areas, the quest for new and improved materials has targeted functional materials with enhanced specificity and efficiency towards the final application. The application of porous materials ranges from sensing, protein separation, solid-phase extraction, catalysis, to CO2 capture and reuse. Recently, the design, synthesis, and porosity control of poly (ionic liquid)s have been attempted through strategies that include classic polymerization techniques as well as molecular imprinting and aerogels production. This review aims at providing the recent advances on porous poly (ionic liquid)s, giving a critical perspective about the works in which key requirements for porosity induction are discussed. Several applications that rely on molecular interactions between the porous material and target compounds are presented, focusing mainly on CO2 capture and reuse, along with some challenges that the scientific community in this field need to be aware of.}

Pullulan, a neutral polysaccharide, was chemically modified in order to obtain two charged derivatives: reaction with SO3.DMF complex afforded a sulfate derivative (SP), while reaction with glycidyltrimethylammonium chloride gave a quaternary ammonium salt (AP). The presence of the charged groups was confirmed by FTIR. Assessment of the positions where the reaction took place was based on 1H- and 13C NMR (COSY, HSQC-TOCSY, HSQC-DEPT, and HMBC) experiments. Estimation of the degree of substitution (DS) was made from elemental analysis data, and further confirmed by NMR peak areas in the case of AP. These new derivatives showed the capability to condense with each other, forming nanoparticles with the ability to associate a model protein (BSA) and displaying adequate size for drug delivery applications, therefore making them good candidates for the production of pullulan-based nanocarriers by polyelectrolyte complexation.

Chromonic liquid crystals (CLC) are lyotropic phases formed by discotic mesogens in water. Simple chiral dopants such as amino acids have been reported to turn chromonic liquid crystals into their cholesteric counterparts. Here we report a chirality amplification effect in the nematic phase of a 9 wt% disodium cromoglycate (DSCG) lyotropic liquid crystal (LLC) upon doping with a water-soluble codeine derivative. The transition on cooling the isotropic to the nematic phase showed the presence of homochiral spindle-shaped droplets (tactoids). NMR DOSY experiments on a triple gradient probe revealed a small degree of diffusion anisotropy for the alkaloid embedded in the liquid crystal structure. These results in combination with XRD, CD and POM experiments agree with a supramolecular aggregation model based on simple columnar stacks.

{Fungal stains affect documents and artworks on paper all over the world, diminishing their chemical stability and compromising their readability. The present paper studies the suitability of agarose and gellan gum hydrogels to remove fungal stains from paper, using paper impregnated with alizarin as a model system to simulate the most common colorant molecules produced by fungi - polyketide quinones. The effect of pH variation on the efficacy of the gels was evaluated by UV spectrometry. The results show that the cleaning efficacy of the gels greatly depends on the gel matrix, the colorant molecules, and the pH balance of the process.}

CO2 separation from natural gas is considered to be a crucial strategy to mitigate global warming problems, meet product specification, pipeline specs and other application specific requirements. Silica xerogels (SX) are considered to be potential materials for CO2 capture due to their high specific surface area. Thus, a series of silica xerogels functionalized with imidazolium, phosphonium, ammonium and pyridinium-based room-temperature ionic liquids (RTILs) were synthesized. The synthesized silica xerogels were characterized by NMR, helium pycnometry, DTA-TG, BET, SEM and TEM. CO2 sorption, reusability and CO2/CH4 selectivity were assessed by the pressure-decay technique. Silica xerogels containing IL demonstrated advantages compared to RTILs used as separation solvents in CO2 capture processes including higher CO2 sorption capacity and faster sorption/desorption. Using fluorinated anion for functionalization of silica xerogels leads to a higher affinity for CO2 over CH4. The best performance was obtained by SX- [bmim] [TF2N] (223.4 mg CO2/g mg/g at 298.15 K and 20 bar). Moreover, SX- [bmim] [TF2N] showed higher CO2 sorption capacity as compared to other reported sorbents. CO2 sorption and CO2/CH4 selectivity results were submitted to an analysis of variance and the means compared using Tukey's test (5%).

The present work presents a strategic oxidative desulfurization system able to efficiently operate under sustainable conditions, i.e. using an eco-friendly oxidant and without the need of extractive organic solvents. The catalytic performance of Eu(PW11O39)2@aptesSBA-15 was evaluated for the oxidative desulfurization of a multicomponent model diesel using a solvent-free or biphasic systems. The results reveal its remarkable desulfurization performance achieving complete desulfurization after just 2 h of reaction. Moreover, the composite has shown a high recycling ability without loss of catalytic activity for ten consecutive ODS cycles. Interestingly, under solvent-free conditions it was possible to maintain the desulfurization efficiency of the biphasic system while being able to avoid the use of harmful organic solvents. In this case, a successful extraction of oxidized sulfur compounds was found conciliating centrifugation and water as extraction solvent. Therefore, this work reports an important step towards the development of novel eco-sustainable desulfurization systems with high industrial interest.

Unexpected and unusual reactivity of 2-methylimidazolium salts toward aryl-N-sulfonylimines and aryl aldehydes is here reported. Upon reaction with aryl-N-sulfonylimines, the addition product, arylethyl-2-imidazolium-1-tosylamide (3), is formed with moderate to good yields, while upon reaction with aldehydes, the initial addition product (6) observed in NMR and HPLC–MS experimental analysis is postulated by us as an intermediate to the final conversion to carboxylic acids. Studies in the presence and absence of molecular oxygen allow us to conclude that the imidazolium salts is crucial for the oxidation. A detailed mechanistic study was carried out to provide insights regarding this unexpected reactivity.

{The mechanism of cellulose dissolution in ionic liquid (IL)/dimethyl sulfoxide (DMSO) solvent systems has attracted much attention due to the possible replacement of synthetic materials. However, the solvent behaviour is not completely understood. This work has found an explanation for the solvent behaviour in cellulose dissolution, considering the almost unavoidable presence of the water. Ternary {[}C(4)mim] Cl/DMSO/H2O mixtures were studied with Nuclear Magnetic Resonance experiments and molecular dynamics simulations to explore IL/molecular solvents interactions and disclose the water interactions in these complex media. Titration of binary and ternary solvent systems with water and DMSO disclosed a relation between water's proton chemical shift and the molar fraction of the mixture components, creating an unprecedent theory to predict the cellulose solvation ability. A ``working range{''} for IL/DMSO/H2O ratio was observed, tested in cellulose dissolution, and rationalized using cellobiose interaction. Within this solvent ratio, the interactions between components are maximized, being switched on, while out of the range, the interactions are no longer detected. (C) 2021 Elsevier B.V. All rights reserved.}

{The Keggin phosphotungstate (PW12) and its zinc derivative (PW11Zn) were tested as oxidative catalysts for desulfurization processes using simulated and real diesels. These compounds were used as homogeneous catalysts, while the corresponding SBA-15 composites were used as heterogeneous catalysts. The comparison of their catalytic performance demonstrated that the zinc-substituted polyoxo-metalate is more efficient than the plenary PW12 structure. Additionally, using the heterogeneous PW11Zn@aptesSBA-15, the sustainability and catalytic efficiency was largely improved, allowing the total sulfur removal from model diesel after 1 h using a small amount of oxidant (H2O2/S = 4) under an oxidative solvent-free system. The desulfurization of real diesels was performed under similar conditions, achieving 87.8% of efficiency using the PW11Zn@aptesSBA-15 catalyst. Furthermore, the catalyst maintained its activity over consecutive desulfurization cycles. The cost-effective operational conditions achieved with PW11Zn@aptesSBA-15 turn this into a promising material to be used in an industrial scale to treat diesel.}

The heterogenization of the highly active monovacant polyoxotungstate ([PW11O39]7 −, abbreviated as PW11) was achieved by preparing the corresponding long chain quaternary ammonium salt (ODA7PW11, ODA = CH3(CH2)17(CH3)3N). The complete cation exchange confers total heterogeneity to the monovacant catalyst while keeping its oxidative catalytic activity. In fact, the heterogeneous catalyst allowed for the complete desulfurization of a multicomponent model diesel (2000 ppm S) after 40 min of reaction, conciliating extraction (using BMIMPF6 solvent) and oxidation (ECODS process using H2O2 oxidant). The heterogeneous catalyst has shown a superior desulfurization performance when compared with the homogeneous quaternary ammonium TBAPW11 catalyst (TBA = (C4H9)4 N). Both hybrid catalysts have been successfully reused in consecutive ECODS cycles. Additionally, the long carbon chain cations provide a protective environment around the polyoxometalate allowing for ODA7PW11 to retain its heterogeneity and structure after the ECODS process.

Imidazolium-based ionic liquids (ILs) with different cation alkyl chain ([i-C5mim] or [C4mim]) and inorganic anions ([Cl−], [Tf2N−], [PF6−] and [DCA−]) were synthesized and immobilized in commercial mesoporous silica. The synthesized supported ILs (SILs) were characterized using NMR, FTIR, TGA, BET, SEM and TEM. CO2 sorption capacity, reusability and CO2/N2 selectivity were assessed by the pressure-decay technique. The effects of IL concentration, cation and anion chemical structure in CO2 sorption capacity and CO2/N2 separation performance were evaluated. Tests evidenced that the presence of branching on the cation alkyl side chain increases CO2/N2 selectivity. The immobilization of the IL [i-C5TPIm][Cl] on mesoporous silica in different concentrations (50, 20, 10 and 5 %) revealed that lower IL concentration results in higher CO2 sorption capacity. Immobilization of ILs containing fluorinated anions at low concentrations in the mesoporous silica support may promote the improvement of the CO2/N2 selectivity without interfering on CO2 sorption capacity of the original support. CO2 sorption capacity value shown by sample SIL-5 % - [i-C5TPIm][Tf2N] (79.50 ± 0.70 mg CO2  g-1) was close to the value obtained for the pristine mesoporous silica (81.70 ± 2.20 mg CO2 g-1) and the selectivity (4.30 ± 0.70) was more than twice of the one obtained for the support alone (2.32 ± 0.4). Recycle tests demonstrated that the ILs immobilized in mesoporous silica samples are stable, providing a new option to be used in CO2 capture processes.

The incorporation of europium polyoxometalates into silica nanoparticles can lead to a biocompatible nanomaterial with luminescent properties suitable for applications in biosensors, biological probes, and imaging. Keggin-type europium polyoxometalates Eu(PW11)x (x = 1 and 2) with different europium coordination environments were prepared by using simple methodologies and no expensive reactants. These luminescent compounds were then encapsulated into silica nanoparticles for the first time through the water-in-oil microemulsion methodology with a nonionic surfactant. The europium polyoxometalates and the nanoparticles were characterized by using several techniques [FTIR, FT-Raman, 31P magic angle spinning (MAS) NMR, and TEM/energy-dispersive X-ray spectroscopy (TEM-EDS), AFM, dynamic light scattering (DLS), and inductively coupled plasma MS (ICP-MS) analysis]. The stability of the material and the integrity of the europium compounds incorporated were also examined. Furthermore, the photoluminescence properties of the Eu(PW11)x@SiO2 nanomaterials were evaluated and compared with those of the free europium polyoxometalates. The silica surface of the most stable nanoparticles was successfully functionalized with appropriate organosilanes to enable the covalent binding of oligonucleotides.

The aim of the present study is to investigate the effect of the hydrolysis process on the properties of nanocrystalline cellulose (NCC) isolated from different precursors and the subsequent use of the extracted NCC for the reduction of graphene oxide (GO). The raw materials (almond and peanut shells) chosen for the isolation of cellulose were selected on the basis of their abundance and their poorly investigation in the production of NCC. Microcrystalline cellulose (MCC) was firstly extracted by alkali and bleaching treatments, then hydrolyzed under different processes to produce NCC polymorphs with structure I (NCC-I) and NCC structure II (NCC-II). The Fourier transform infrared spectroscopy, the X-ray diffraction (XRD) and the 13C NMR studies of the alkali and bleached products confirmed the formation of cellulose type I with high purity and good crystallinity, while scanning electron microscopy (SEM) showed micrometric fibers with lengths reaching 80 µm. Sulfuric acid treatment of these microfibers results in NCC type I or II, depending on the hydrolysis process. SEM of the NCC samples exhibited nanorods with diameter and aspect ratio in the range of 20–40 and 20–25 nm, respectively. Thermogravimetric analysis (TGA) of the MCC and NCC products indicated stable materials with a degradation temperature reaching 240 and 200 °C for MCC and NCC, respectively. The other part of our work concerns the use of the obtained cellulose nanocrystals (type II) for the preparation of reduced graphene oxide composite (NCC/RGO), to demonstrate the reducing properties of the isolated NCCII.

Three iron(III) complexes with ligands derived from N-ethyl-N-(2-aminoethyl) salicylaldiminate (H, 1; 5-Br, 2; 3-OMe, 3 substituents at the phenyl group) were prepared and the X-ray crystal structures of 1 and 2 are reported. NMR studies of solutions of these complexes in DMSO allowed for investigation of their magnetic behaviour and paramagnetic relaxation contribution. The relaxivities measured ranged from 0.35 to 0.80 mM(-1) s(-1) for proton Larmor frequencies from 0.01 to 300 MHz, in agreement with those known for other iron(III) based contrast agents. Biological studies on colonic epithelial T-84 cell monolayers showed that the compounds exert toxic effects only at concentrations higher than 100 mu M while coincidently reducing colonic epithelial secretory function. These two features make these complexes good candidates for further development in order to be used as MRI contrast agents. (C) 2015 Elsevier B.V. All rights reserved.

The mitigation of climate change effects requires the use of alternative materials and technologies to control CO2 atmospheric levels through its capture, storage and use. In this field, the current work presents the evaluation of two poly(ionic liquid)s (PILs) (poly-1-vinyl-3-ethylimidazolium acetate and hydroxide) combined with free ionic liquid (IL) 1-butyl-3-methylimidolium acetate (BMI·OAc) for CO2 capture. The sorption capacity of PIL@IL composites was evaluated under 20 bar of CO2 at 298 K. Nuclear Magnetic Resonance (NMR) spectroscopy allowed quantification of CO2 sorption (physisorption and/or chemisorption) and in situ study of the PIL−CO2 interaction mechanism. NMR in combination with Molecular Dynamics (MD) simulations suggested a 3D organization of PIL composites, maintaining a similar organization to ILs. Also, the use of aqueous solutions of PIL@IL composites was tested, identifying the optimum conditions for water activation (intrinsic water trapped inside IL structure) for chemisorption. As our main contribution, we demonstrate the possibility to control the sorption pathway towards CO2 physisorption, or CO2 conversion (chemisorption) through carbonation (HCO3−/CO32-) according to the PIL/IL ratio, ions structure and water amount. The use of PIL/IL composites is a promising advance for further CO2 reuse approaching a biomimetic carbonation process.

The subject of ionicity has been extensively discussed in the last decade, due to the importance of understanding the thermodynamic and thermophysical behaviour of ionic liquids. In our previous work, we established that ionic liquids' ionicity could be improved by the dissolution of simple inorganic salts in their milieu. In this work, a comparison between the thermophysical properties of two binary systems of ionic liquid + inorganic salt is presented. The effect of the ammonium thiocyanate salt on the ionicity of two similar ionic liquids, 1-ethyl-3-methylimidazolium ethylsulfonate and ethylsulfate, is investigated in terms of the related thermophysical properties, such as density, viscosity and ionic conductivity in the temperature range 298.15-323.15 K. In addition, spectroscopic (NMR and Raman) and molecular dynamic studies were conducted in order to better understand the interactions that occur at a molecular level. The obtained results reveal that although the two anions of the ionic liquid exhibit similar chemical structures, the presence of one additional oxygen in the ethylsulfate anion has a major impact on the thermophysical properties of the studied systems.

A novel composite has been prepared through the immobilization of the Keggin sandwich-type {[}Sm (PMo11O39)(2)](11-) anion (SmPOM) on large-pore silica spheres previously functionalized with trimethylammonium groups (TMA). The resulting SmPOM@TMA-LPMS material has been evaluated as heterogeneous catalyst in a biphasic desulfurization 1:1 diesel/extraction solvent system using H2O2 as oxidant. Preliminary experiments were conducted with different extraction solvents, acetonitrile and {[}BMIM]PF6 ionic liquid. The optimized extractive and catalytic oxidative desulfurization system (ECODS) with {[}BMIM]PF6 was able to reach complete sulfur removal from a model diesel containing 2100 ppm S in just 60 min (10 min of initial extraction + 50 min of catalytic step). The reutilization of catalyst and extraction phase has been successfully performed without loss of desulfurization efficiency in consecutive cycles, turning the process more sustainable and cog-effective. The remarkable results with simulated diesel have motivated the application of the catalyst in the desulfurization of untreated real diesel and 74% of efficiency was achieved after only 2 h for three consecutive cycles.

Mesoporous silica nanoparticles (MSNs) strategically functionalized were used to immobilize a homogeneous polyoxomolybdate catalyst {[}PMo12O40](3-) (PMo12), active but unstable. The PMo12@TBA-MSN composite (where TBA refers to surface-tethered tributylammonium groups) conferred high stability to the polyoxomolybdate catalytic center and displayed an increase in efficiency for the oxidative desulfurization (ECODS) of a diesel simulant under sustainable conditions (using H2O2 as oxidant and an ionic liquid, {[}BMIM]PF6, as solvent). Continuous reuse of the catalyst and ionic liquid solvent in consecutive ECODS cycles was successfully performed, avoiding the production of residual wastes. The performance of the PMo12@TBA-MSN catalyst improved upon its reuse, leading to complete desulfurization of a multicomponent model diesel containing benzothiophene derivatives after just 1 h of the catalytic stage of the process. The robust nature of the supported catalyst was indicated by characterization of the recovered solid which showed retention of the structural and chemical integrities.

Download Article
Export citation
1,049
TOTAL VIEWS
Article has an altmetric score of 3

Suggest a Research Topic >

SHARE ON
0
0
0
New

ORIGINAL RESEARCH ARTICLE
Front. Chem., 14 November 2019 | https://doi.org/10.3389/fchem.2019.00756
Mesoporous Silica vs. Organosilica Composites to Desulfurize Diesel
Susana O. Ribeiro1, Carlos M. Granadeiro1, Marta C. Corvo2, João Pires3, José M. Campos-Martin4, Baltazar de Castro1 and Salete S. Balula1*
1LAQV-REQUIMTE, Departamento de Química e Bioquímica, Faculdade de Ciências, Universidade Do Porto, Porto, Portugal
2CENIMAT/I3N, Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Caparica, Portugal
3Faculdade de Ciências, Centro de Química e Bioquímica and CQE, Universidade de Lisboa, Lisbon, Portugal
4Grupo de Energía y Química Sostenibles (EQS), Instituto de Catálisis y Petroleoquímica, CSIC, Madrid, Spain
The monolacunary Keggin-type [PW11O39]7− (PW11) heteropolyanion was immobilized on porous framework of mesoporous silicas, namely SBA-15 and an ethylene-bridged periodic mesoporous organosilica (PMOE). The supports were functionalized with a cationic group (N-trimethoxysilypropyl-N, N, N-trimethylammonium, TMA) for the successful anchoring of the anionic polyoxometalate. The PW11@TMA-SBA-15 and PW11@TMA-PMOE composites were evaluated as heterogeneous catalysts in the oxidative desulfurization of a model diesel. The PW11@TMA-SBA-15 catalyst showed a remarkable desulfurization performance by reaching ultra-low sulfur levels (<10 ppm) after only 60 min using either a biphasic extractive and catalytic oxidative desulfurization (ECODS) system (1:1 MeCN/diesel) or a solvent-free catalytic oxidative desulfurization (CODS) system. Furthermore, the mesoporous silica composite was able to be recycled for six consecutive cycles without any apparent loss of activity. The promising results have led to the application of the catalyst in the desulfurization of an untreated real diesel supplied by CEPSA (1,335 ppm S) using the biphasic system. The system has proved to be a highly efficient process by reaching desulfurization values higher than 90% for real diesel during three consecutive cycles.

In this work 2H NMR spectroscopy and 1H NMR relaxometry and diffusometry were used to characterise water order and dynamics in cellulose acetate/silica asymmetric membranes. Two hydrated membranes were characterised allowing the identification of extra ordering of the water molecules and the presence in each membrane of up to two spectral components with different degrees of order and different T1 values. The mechanism behind this order increase was ascribed to the rapid exchange of the water molecules between the pore walls and its interior. T1 relaxometry dispersions allowed for the identification of the relevant mechanisms of pore-confined water motion, with rotations mediated by translational displacements (RMTD) as the dominant mechanism in the low frequency region. Using the RMTD low cut off frequency along with the in situ directly measured diffusion constant it was possible do determine characteristic lengths of correlated water motion in both membranes studied, which fall in ranges compatible with typical pore dimensions in similar membranes.

Extracts from plants have considerable significance as bioactive compounds with several pharmacological applications. Polyphenols have attracted the attention as anti-inflammatory and anti-oxidative materials. Nonetheless, the amount of these compounds in the extracts is typically very low. Consequently, green extraction techniques with higher efficiency for phenolic compounds are of paramount importance. Ionic liquids (ILs), which are also known as designer solvents can be used to extract polyphenols, however the search for ideal solvents is mostly done by trial and error. In this work, nuclear magnetic resonance (NMR) is used to study the profile of ILs molecular interactions with model compounds that mimic polyphenols. The ILs that exhibit the strongest molecular interactions were proven to have the highest efficiency when extracting polyphenols from matcha Japanese green tea, known to be extremely rich in these compounds. Both the IL cation and anion have an influence on the solvent behaviour. The best IL solvents for matcha polyphenols were imidazolium derivatives with shorter alkyl side chains and weakly basic anions such as tricyanomethanide, dicyanamide and triflate. Thus, the NMR approach avoids an exhaustive testing and allows the rational selection of the best ILs for the extraction.

A novel method to prepare silica nano-sized particles incorporating polyoxometalates was developed leading to a new efficient heterogeneous oxidative catalyst. Zinc-substituted polyoxotungstate [PW11Zn(H2O)O39](5-) (PW11Zn) was encapsulated into silica nanoparticles using a cross-linked organic-inorganic core, performed through successive spontaneous reactions in water. The potassium salt of PW11Zn and the composite formed, PW11Zn-APTES@SiO2, were characterized by a myriad of solid-state methods such as FT-IR, FT-Raman, (31)P and (13)C CP/MAS solid-state NMR, elemental analysis and SEM-EDS, confirming the integrity of the PW11Zn structure immobilized in the silica nanoparticles. The new composite has shown to be a versatile catalyst for the oxidation of olefins and also to catalyze the desulfurization of a model oil using H2O2 as the oxidant and acetonitrile as the solvent. The novel composite material was capable of being recycled without significant loss of activity and maintaining its structural stability for consecutive desulfurization and olefin oxidative cycles.

The first lanthanopolyoxometalate-supported bifunctional periodic mesoporous organosilica (BPMO) composite is here reported. The incorporation of decatunsgstoeuropate anions ([Eu(W5O18)2]9−) within the porous channels of an ethylene-bridged TMAPS-functionalized BPMO produced a luminescent material exhibiting a strong red emission under UV irradiation. Photoluminescence studies showed an efficient energy transfer process to the lanthanide emitting center in the material (antenna effect). A significant change in the coordination environment of Eu3+ ions was observed after its incorporation into the TMAPS-functionalized material. The possible reason for this is discussed within the paper.

Strategic polyoxometalate Keggin-type structural modification was performed to increase the oxidative catalytic performance to desulfurize model and real diesels. The most active lacunar structure {[}PW11O39](7-) (PW11) showed to complete desulfurize a simulated diesel after 60 min at 70 degrees C. Its application as homogeneous catalyst using a biphasic system 1: 1 diesel/acetonitrile needed to use an excess of oxidant (ratio H2O2/S = 8). The immobilization of the PW11 on amine-functionalized SBA-15 supports originated two heterogeneous catalysts PW11@aptesSBA-15 and PW11@tbaSBA-15. The best results were attained with the PW11@aptesSBA-15 catalyst showing identical oxidative desulfurization performance as the homogeneous analogue. As advantage, this heterogeneous catalyst promotes the complete desulfurization of simulated diesel using a solvent-free system, i.e. without the need of acetonitrile use. On the other hand, the same desulfurization efficiency could be achieved using half the amount of oxidant (H2O2/S = 4). The oxidative desulfurization of the real diesel achieved a remarkable 83.4% of efficiency after just 2 h. The recycling capacity of PW11@aptesSBA-15 catalyst was confirmed for eight consecutive cycles using the biphasic and the solvent-free systems. Its stability investigation demonstrates to be higher under the solvent-free system than the biphasic system, without practically any occurrence of PW11 leaching in the first case. On the other hand, the Venturello peroxocomplex {[}PO4\{W(O-2)(2)\}(4)](3-), recognized as active intermediate in the homogeneous biphasic system, was not identified in the heterogeneous catalytic systems.

Novel material catalysts based in the active zinc-substituted polyoxotungstate ({[}PW11Zn(H2O)(39)](5-), abbreviated as PW11Zn) were efficiently used in the oxidative desulfurization of real and model diesels. These active catalytic center was strategically immobilized in a less hydrophilic periodic mesoporous organosilicas (PMOs), containing ethane-bridge (PMOE) and benzene-bridge (PMOB) walls, functionalized with (3-aminopropyl)triethoxysilane (aptes). The efficiency of the novel catalytic composites (PW11Zn@aptesPMOE and PM11Zn@aptesPMOB) was studied under oxidative desulfurization system (CODS) without the presence of an extraction solvent and also using a biphasic (diesel/extraction solvent) oxidative desulfurization system (ECODS). Both composites presented higher desulfurization efficiency under the solvent-free system, reaching ultra-low levels of sulfur compounds after only 1 h and using low ratio of H2O2/S = 4. The catalysts could be recycled without loss of activity for ten consecutive cycles. However, after the first desulfurization cycle complete desulfurization was achieved within only 30 min using PW11Zn@aptesPMOE composite. Also, the structure of PW it Zn@aptesPMOE demonstrated to be more stable than PW11Zn@aptesPMOB, probably due to the occurrence of some PW11Zn leaching from the PMOB surface, probably caused by the lower interaction of PW11Zn with the benzene-bridge PMOB wall. The most robust catalyst PW11Zn@aptesPMOE was used to desulfurize a real diesel achieving 75.9% of desulfurization after 2 h. The catalyst was further recycled with success to treat real diesel.

This work compares the stability and the catalytic efficiency of different ionic liquid phosphomolybdates ([BPy]3[PMo12O40] and [BMIM]3[PMo12O40]) with a cationic (propylpyridinium) functionalized mesoporous silica nanoparticle composite (PMo12O40@PPy-MSN). These were used as solid catalysts for the oxidative desulfurization of a multicomponent model diesel using hydrogen peroxide as oxidant and a polar immiscible extraction solvent. Ionic liquid ([BMIM][PF6] was successfully used as solvent to extract sulfur compounds from model diesel. The ionic liquid phosphomolybdates showed partial solubility in the ionic liquid phase, occurring some decomposition of their Keggin structure in the soluble reaction media, probably caused by their interaction with oxidant. On the other hand, the phosphomolybdate composite PMo12O40@PPy-MSN presented high structural stability and only negligible leaching occurrence after various consecutive reaction cycles. The model diesel was near complete desulfurized after 3 h and consecutive desulfurization cycles were performed without loss of activity. Therefore, the immobilization of Keggin phosphomolybdate structure [PMo12O40]3− using cationic propylpyridinium silica nanoparticle is an assertive strategy to produce stable and active heterogeneous catalysts.

The development of LBG-based nanoparticles intending an application in oral immunization is presented. Nanoparticle production occurred by mild polyelectrolyte complexation, requiring the chemical modification of LBG. Three LBG derivatives were synthesized, namely a positively charged ammonium derivative (LBGA) and negatively charged sulfate (LBGS) and carboxylate (LBGC) derivatives. These were characterized by Fourier-transform infrared spectroscopy, elemental analysis, nuclear magnetic resonance spectroscopy, gel permeation chromatography, and x-ray diffraction. As a pharmaceutical application was aimed, a toxicological analysis of the derivatives was performed by both MTT test and LDH release assay.

Several nanoparticle formulations were produced using LBGA or chitosan (CS) as positively charged polymers, and LBGC or LBGS as negatively charged counterparts, producing nanoparticles with adequate properties regarding an application in oral immunization.

An unprecedented approach towards oligosaccharides containing N-acetylglucosamine-N-acetylmuramic (NAG-NAM) units was developed. These novel bacterial cell wall surrogates were obtained from chitosan via a top down approach involving both chemical and enzymatic reactions. The chemical modification of chitosan using a molecular clamp based strategy, allowed obtaining N-acetylglucosamine-N-acetylmuramic (NAG-NAM) containing oligomers. Intercalation of NAM residues was confirmed through the analysis of oligosaccharide fragments from enzymatic digestion and it was found that this route affords NAG-NAM containing oligosaccharides in 33% yield. These oligosaccharides mimic the carbohydrate basic skeleton of most bacterial cell surfaces. The oligosaccharides prepared are biologically relevant and will serve as a platform for further molecular recognition studies with different receptors and enzymes of both bacterial cell wall and innate immune system. This strategy combining both chemical modification and enzymatic digestion provides a novel and simple route for an easy access to bacterial cell wall fragments – biologically important targets.

{Understanding the behavior of a chemical compound at a molecular level is fundamental, not only to explain its macroscopic properties, but also to enable the control and optimization of these properties. The present work aims to characterize a set of systems based on the ionic liquids {[}Aliquat]{[}Cl] and {[}Aliquat]{[}FeCl4] and on mixtures of these with different concentrations of DMSO by means of H-1 NMR relaxometry, diffusometry and X-ray diffractometry. Without DMSO, the compounds reveal locally ordered domains, which are large enough to induce order fluctuation as a significant relaxation pathway, and present paramagnetic relaxation enhancement for the {[}Aliquat]{[}Cl] and {[}Aliquat]{[}FeCl4] mixture. The addition of DMSO provides a way of tuning both the local order of these systems and the relaxation enhancement produced by the tetrachloroferrate anion. Very small DMSO volume concentrations (at least up to 1%) lead to enhanced paramagnetic relaxation without compromising the locally ordered domains. Larger DMSO concentrations gradually destroy these domains and reduce the effect of paramagnetic relaxation, while solvating the ions present in the mixtures. The paramagnetic relaxation was explained as a correlated combination of inner and outer-sphere mechanisms, in line with the size and structure differences between cation and anion. This study presents a robust method of characterizing paramagnetic ionic systems and obtaining a consistent analysis for a large set of samples having different co-solvent concentrations.}