Abstract One of the unresolved aspects of cellulose-based liquid crystalline phases is their chirality. Although cellulose is intrinsically chiral, both left-handed (LH) and right-handed (RH) chiral nematic phases are reported in cellulose derivatives under different conditions. The origin of these discrepancies?and whether LH and RH twisted structures coexist within a single material?has remained unclear. Here, the first direct evidence of hierarchical LH and RH twisted structures coexisting in a solvent-free, thermotropic cellulose derivative at room temperature is provided. Free-standing cholesteric films exhibit distinct LH and RH twisted domains, whose pitches respond oppositely to uniaxial mechanical strain: the LH pitch increases, while the RH pitch decreases with increasing strain. This contrasting response results from the coexistence of intertwined LH and RH twisted structures, whose optical axes are oriented differently relative to the strain direction. Notably, after stretching beyond their elastic limit, the films spontaneously recover their original shape within minutes. During this recovery, circular dichroism (CD) measurements reveal an increase in RH pitch and a decrease in LH pitch, evidencing reversible, strain-responsive behavior. Multiscale structural characterization confirms the hierarchical chiral organization and its mechanoresponsive nature, providing new insights into the origin of chirality in cellulose-based liquid crystalline materials.

Reflectins are a family of intrinsically disordered proteins involved in cephalopod camouflage, making them an interesting source for bioinspired optical materials. Understanding reflectin assembly into higher-order structures by standard biophysical methods enables the rational design of new materials, but it is difficult due to their low solubility. To address this challenge, we aim to understand the molecular self-assembly mechanism of reflectin’s basic unit—the protopeptide sequence YMDMSGYQ—as a means to understand reflectin’s assembly phenomena. Protopeptide self-assembly was triggered by different environmental cues, yielding supramolecular hydrogels, and characterized by experimental and theoretical methods. Protopeptide films were also prepared to assess optical properties. Our results support the hypothesis for the protopeptide aggregation model at an atomistic level, led by hydrophilic and hydrophobic interactions mediated by tyrosine residues. Protopeptide-derived films were optically active, presenting diffuse reflectance in the visible region of the light spectrum. Hence, these results contribute to a better understanding of the protopeptide structural assembly, crucial for the design of peptide- and reflectin-based functional materials.

Human aldehyde oxidase (hAOX1) is a molybdenum enzyme with high toxicological importance, but its physiological role is still unknown. hAOX1 metabolizes different classes of xenobiotics and is one of the main drug-metabolizing enzymes in the liver, along with cytochrome P450. hAOX1 oxidizes and inactivates a large number of drug molecules and has been responsible for the failure of several phase I clinical trials. The interindividual variability of drug-metabolizing enzymes caused by single nucleotide polymorphisms (SNPs) is highly relevant in pharmaceutical treatments. In this study, we present the crystal structure of the inactive variant G1269R, revealing the first structure of a molybdenum cofactor (Moco)-free form of hAOX1. These data allowed to model, for the first time, the flexible Gate 1 that controls access to the active site. Furthermore, we inspected the thermostability of wild-type hAOX1 and hAOX1 with various SNPs (L438V, R1231H, G1269R or S1271L) by CD spectroscopy and ThermoFAD, revealing that amino acid exchanges close to the Moco site can impact protein stability up to 10 °C. These results correlated with biochemical and structural data and enhance our understanding of hAOX1 and the effect of SNPs in the gene encoding this enzyme in the human population. Enzymes Aldehyde oxidase (EC1.2.3.1); xanthine dehydrogenase (EC1.17.1.4); xanthine oxidase (EC1.1.3.2). Databases Structural data are available in the Protein Data Bank under the accession number 6Q6Q.

Cellulosomes are highly sophisticated molecular nanomachines that participate in the deconstruction of complex polysaccharides, notably cellulose and hemicellulose. Cellulosomal assembly is orchestrated by the interaction of enzyme-borne dockerin (Doc) modules to tandem cohesin (Coh) modules of a non-catalytic primary scaffoldin. In some cases, as exemplified by the cellulosome of the major cellulolytic ruminal bacterium Ruminococcus flavefaciens, primary scaffoldins bind to adaptor scaffoldins that further interact with the cell surface via anchoring scaffoldins, thereby increasing cellulosome complexity. Here we elucidate the structure of the unique Doc of R. flavefaciens FD-1 primary scaffoldin ScaA, bound to Coh 5 of the adaptor scaffoldin ScaB. The RfCohScaB5-DocScaA complex has an elliptical architecture similar to previously described complexes from a variety of ecological niches. ScaA Doc presents a single-binding mode, analogous to that described for the other two Coh-Doc specificities required for cellulosome assembly in R. flavefaciens. The exclusive reliance on a single-mode of Coh recognition contrasts with the majority of cellulosomes from other bacterial species described to date, where Docs contain two similar Coh-binding interfaces promoting a dual-binding mode. The discrete Coh-Doc interactions observed in ruminal cellulosomes suggest an adaptation to the exquisite properties of the rumen environment.

Molybdenum and tungsten are taken up by bacteria and archaea as their soluble oxyanions through high affinity transport systems belonging to the ATP-binding cassette (ABC) transporters. The component A (ModA/TupA) of these transporters is the first selection gate from which the cell differentiates between MoO4 2−, WO4 2− and other similar oxyanions. We report the biochemical characterization and the crystal structure of the apo-TupA from Desulfovibrio desulfuricans G20, at 1.4 Å resolution. Small Angle X-ray Scattering data suggests that the protein adopts a closed and more stable conformation upon ion binding. The role of the arginine 118 in the selectivity of the oxyanion was also investigated and three mutants were constructed: R118K, R118E and R118Q. Isothermal titration calorimetry clearly shows the relevance of this residue for metal discrimination and oxyanion binding. In this sense, the three variants lost the ability to coordinate molybdate and the R118K mutant keeps an extremely high affinity for tungstate. These results contribute to an understanding of the metal-protein interaction, making it a suitable candidate for a recognition element of a biosensor for tungsten detection.

We have performed experiments on the crystallization of two low molecular weight, positively charged proteins, lysozyme and ribonuclease A, using ionic liquids as either crystallization additives or, in particular cases, as precipitating agents. The ionic liquids (ILs) have been ordered according to their salting-in/out ability and the relative position of these ionic liquids in this ranking has been rationalized by considering their hydration properties (positive-negative, hydrophobic-hydrophilic). The ability to screen the effective charge of cationic proteins and aid protein nucleation (salting-out) has been shown to be superior for large polarizable anions with low charge density, negatively hydrated-Cl-, Br-, [SCN](-), methane-[C1SO3](-) and ethanesulfonates [C2SO3](-), than for anions with a relatively stable hydration shell, positively hydrated-lactate [Lac](-), butylsulfonate [C4SO3](-) and acetate [Ac](-). Upon increasing the background salt concentration, where electrostatic interactions are already effectively screened, the ability of the IL ions to stabilize proteins in solution (salting-in) has been shown to increase as the ions are likely to migrate to the non-polar protein surface and lower protein-water interfacial tension. This tendency is enhanced as the focus moves from those ions with positively hydrated hydrophilic compartments (e. g. [Ac](-)) to those with negatively hydrated groups (e. g. [C1SO3](-)) and the prevailing hydrophobic hydration (e. g. [C4SO3](-)). The observed inversion in the relative effect of ILs on protein crystallization with increasing ionic strength of the aqueous media has been interpreted as the differing effects of ion adsorption: charge screening and interfacial tension modification. Moreover, this work can further help in our understanding of the influence of ionic liquids on conformational changes of biomacromolecules in solution. Identification of the specific incorporation sites for choline and acetate ions, localized in two lysozyme crystals grown in pure IL solutions without any buffer or inorganic precipitant, can give us some insight into the role of the ionic liquid ions in protein structure development.