Over the past decade, the capability of double-stranded RNAs to interfere with gene expression has driven new therapeutic approaches. Since small interfering RNA (siRNAs, 21 base pair double-stranded RNA) was shown to be able to elicit RNA interference (RNAi), efforts were directed toward the development of efficient delivery systems to preserve siRNA bioactivity throughout the delivery route, from the administration site to the target cell. Here we provide evidence of RNAi triggering, specifically silencing c-myc protooncogene, via the synthesis of a library of novel multifunctional gold nanoparticles (AuNPs). The efficiency of the AuNPs is demonstrated using a hierarchical approach including three biological systems of increasing complexity: in vitro cultured human cells, in vivo invertebrate (freshwater polyp, Hydra), and in vivo vertebrate (mouse) models. Our synthetic methodology involved fine-tuning of multiple structural and functional moieties. Selection of the most active functionalities was assisted step-by-step through functional testing that adopted this hierarchical strategy. Merging these chemical and biological approaches led to a safe, nonpathogenic, self-tracking, and universally valid nanocarrier that could be exploited for therapeutic RNAi.

n/a

n/a

n/a

n/a

The spontaneous two-photon emission in hydrogenlike ions is investigated within the framework of second- order perturbation theory and Dirac’s equation. Special attention is paid to the angular correlation of the emitted photons as well as to the degree of linear polarization of one of the two photons, if the second is just observed under arbitrary angles. Expressions for the angular correlation and the degree of linear polarization are expanded in powers of cosine functions of the two-photon opening angle, whose coefficients depend on the atomic number and the energy sharing of the emitted photons. The effects of including higher (electric and magnetic) multipoles upon the emitted photon pairs beyond the electric-dipole approximation are also discussed. Calculations of the coefficients are performed for the transitions 2s1/2 → 1s1/2, 3d3/2 → 1s1/2, and 3d5/2 → 1s1/2, along the entire hydrogen isoelectronic sequence (1

A relativistic analysis of the polarization properties of light elastically scattered by atomic hydrogen is performed, based on the Dirac equation and second-order perturbation theory. The relativistic atomic states used for the calculations are obtained by making use of the finite basis set method and are expressed in terms of B splines and B polynomials. We introduce two experimental scenarios in which the light is circularly and linearly polarized, respectively. For each of these scenarios, the polarization-dependent angular distribution and the degrees of circular and linear polarization of the scattered light are investigated as a function of scattering angle and photon energy. Analytical expressions are derived for the polarization-dependent angular distribution which can be used for scattering by both hydrogenic as well as many-electron systems. Detailed computations are performed for Rayleigh scattering by atomic hydrogen within the incident photon energy range 0.5 to 5 keV. Particular attention is paid to the effects that arise from higher (nondipole) terms in the expansion of the electron-photon interaction.

The enzymatic (tyrosinase) and chemical (NaIO4, Ag2O or Fremys's salt) oxidation of biologically relevant catecholamines, such as dopamine (DA), N-acetyldopamine (NADA) and the Ecstasy metabolites (alpha-MeDA and N-Me-alpha-MeDA) generates the corresponding o-quinone which can be trapped with nitrogen bionucleophiles such as N-acetyl-histidine and imidazole in a regioselective reaction that takes place predominantly at the 6-position of the catecholamine. (C) 2012 Elsevier Inc. All rights reserved.

Technology assessment is essentially an approach, a collective of the systematic methods used to scientifically investigate the conditions for and the consequences of technology and technicising and to denote their societal evaluation. It is an investigation about the technological developments as well as an evaluation of its potential impacts on society. The assessment of emerging technologies, however, requires special attention. Brain-Computer Interface (BCI) is an emerging technology which allows for the direct communication between the brain and an external device. It is a truly direct connection, with no use of the normal output pathways of peripheral nerves and muscles, allowing for the brain to have control over objects and software without intermediates. To address these kinds of technologies at early stages of development, Constructive Technology Assessment (CTA), a member of Technology Assessment approaches, has been considered as one of the most fitting approaches. As an emerging technology, BCI is at its early stages of research and thus many challenges are still ahead. Mainstream adoption is not expected in least 10 years many challenges are yet to be overcome. Therefore, the objective of this article is to discuss and present a methodological approach to assess brain-computer interface technology considering constructive technology assessment and future oriented technology analysis as the main processes to undertake the assessment. The assessment will focus only on the non-invasive type of BCI and for medical applications in three defined areas: Communication & Control, Motor Substitution and Motor Recovery for a time horizon of 10 years, 2022. These areas were chosen based on the capability of BCI to serve as a replacement of normal neuromuscular pathways. That makes it one of the best technologies to help people in activating and controlling assistive technologies which enable communication and control of the environment. However, the real impacts o

In this work we propose the use of Social Network Analysis to understand the positioning of the concept of Open Innovation in the literature, offering thereby a complementary approach to existing literature review up to now. The main motivation of this network analysis is to contribute to the understanding of the concept of Open Innovation, with its spread to different areas of knowledge over the years and its relationship with other concepts in the literature. Some 403 articles published in the database of the Science Direct during the years 2003 to 2011 were analyzed. The data was collected separately by year, considering the following information: journals in which the articles were published; countries of origin of the articles’ authors, keywords of these articles and year of publication. The results reveal the intense growth of the use of the words "Open Innovation" in articles from different areas of knowledge, as well as its increasing interconnection with other concepts, allowing the understanding of its diffusion in the literature.

The summer school “Renewable Energy Systems: Role and Use of Parliamentary Technology Assessment” was the first European Summer School with a pure focus on technology assessment. The aim of the three-day long summer school of the European project Parliaments and Civil Society in Technology Assessment (PACITA) was to create awareness of the potential of technology groups in Europe. Therefore, the summer school involved keynotes, practical exercises, mutual reflection, cutting edge training and networking to deal with the theme of renewable energy systems out of the perspective of Technology Assessment (TA), to meet transition objectives or to critically assess energy technologies.

Four categories of innovations have been identified by Freeman and Perez: incremental innovations, radical innovations, new technological systems (systemic innovations), and technological revolutions or new techno-economic paradigms. New techno-economic paradigms represent changes in technological systems that are so far-reaching in their effects that they have a major influence on the behaviour of the entire economy. Scarcity of oil and external costs like global warming are the key arguments and the main drivers of the change of the current paradigm. They will affect especially the mobility of individuals and the interlinked business models. Novel business models within newly created markets will raise e.g. extended mobility services, activities aiming at the infrastructure, new opportunities in the field of energy transmission and supply and even new strategies of recycling, reusing or reducing the use of resources in order to address global scarcity issues. Especially for the established players of the automotive industry like original equipment manufacturers (OEMs) or 1st and 2nd tier suppliers this implicates opportunities and risks at the same time. But also new players will get the chance to create and enter new markets with new or extended products or services and lead the new value chain. This paper compiles and evaluates current approaches and business models of selected OEMs together with upcoming players. Additionally their positions within the existing value chain are being analyzed and classified. Bringing together the identified drivers of changes with current trends within the automotive industry the authors also show new concepts of extended business models, e.g. the idea of an ecosystem, that have the potential to cause an additional shift of power within the global mobility value chain.

Theoretical transition energies and probabilities for He-, Li and Be-like Praseodymium ions are calcu- lated in the framework of the multi-configuration Dirac-Fock method (MCDF), including QED corrections. These calculated values are compared to recent experimental data obtained in the Livermore SuperEBIT electron beam ion trap facility [1].

A new expression for the total K-shell ionization cross section by electron impact based on the rela- tivistic extension of the binary encounter Bethe (RBEB) model, valid from ionization threshold up to relativistic energies, is proposed. The new MRBEB expression is used to calculate the K-shell ionization cross sections by electron impact for the selenium atom. Comparison with all, to our knowledge, available experimental data shows good agreement.

The lifetime of the 1s22s3p 3P0 level of selected Be-like ions, from Z = 5 to Z = 92, is calculated using the multiconfiguration Dirac-Fock method including QED corrections. Full correlation up to the 4f subshell in both initial and final levels for all possible decay modes was included. The results are in reasonable agreement with the scarce existing experimental and theoretical data.

Tuberculosis (TB) remains one of the most serious infectious diseases in the world and the rate of new cases continues to increase. The development of cheap and simple methodologies capable of identifying TB causing agents belonging to the Mycobacterium tuberculosis Complex (MTBC), at point-of-need, in particular in resource-poor countries where the main TB epidemics are observed, is of paramount relevance for the timely and effective diagnosis and management of patients. TB molecular diagnostics, aimed at reducing the time of laboratory diagnostics from weeks to days, still require specialised technical personnel and labour intensive methods. Recent nanotechnology-based systems have been proposed to circumvent these limitations. Here, we report on a paper-based platform capable of integrating a previously developed Au-nanoprobe based MTBC detection assay-we call it {"}Gold on Paper{"}. The Au-nanoprobe assay is processed and developed on a wax-printed microplate paper platform, allowing unequivocal identification of MTBC members and can be performed without specialised laboratory equipment. Upon integration of this Au-nanoprobe colorimetric assay onto the 384-microplate, differential colour scrutiny may be captured and analysed with a generic {"}smartphone{"} device. This strategy uses the mobile device to digitalise the intensity of the colour associated with each colorimetric assay, perform a Red Green Blue (RGB) analysis and transfer relevant information to an off-site lab, thus allowing for efficient diagnostics. Integration of the GPS location metadata of every test image may add a new dimension of information, allowing for real-time epidemiologic data on MTBC identification.

Aims: Our aim is to explore whether gold nanoparticles (AuNPs) functionalized with a carboxylated polyethylene glycol (PEG) and protamine (AuNP@PEG@Prot) can modulate - enhance or restrain - DNA condensation, altering DNA conformation and inducing structural changes. Understanding how these nanoconjugates modulate DNA structure, size and shape of DNA condensates, and enable control over the resulting 3D structures is of major biological and therapeutic importance. Materials & methods: Citrate-AuNPs were covered with a dense layer of a hetero-functional octa(ethylene glycol) (SH-EG(8)-COOH). Conjugation of protamine to the AuNP@PEG was achieved by taking advantage of the carboxylated surface previously generated on the surface of the NP and the remaining amino groups from the protamine, using carbodiimide and N-hydroxysulfosuccinimide coupling reactions. Results & conclusion: AuNP@PEG@Prot modulates the structure and topology of DNA, not only for condensation, but also for decondensation, via formation of higher quantities of dimers and multimers, when compared with AuNP@PEG and free protamine.

We study the total cross section and angular distribution in Rayleigh scattering by hydrogen atom in the ground state, within the framework of Dirac relativistic equation and second-order perturbation theory. The relativistic states used for the calculations are obtained by making use of the finite basis-set method and expressed in terms of B splines and B polynomials. We pay particular attention to the effects that arise from higher (nondipole) terms in the expansion of the electron-photon interaction. It is shown that the angular distribution of scattered photons, while symmetric with respect to the scattering angle θ=90∘ within the electric dipole approximation, becomes asymmetric when higher multipoles are taken into account. The analytical expression of the angular distribution is parametrized in terms of Legendre polynomials. Detailed calculations are performed for photons in the energy range 0.5 to 10 keV. When possible, results are compared with previous calculations.