M, E, B.A. S, I.C. V, R.C.C. M, J.P. V, L. G, I. F, R. I.
2013.
Optical and structural characterization of samarium and europium-doped phosphate glasses. Journal of Non-Crystalline Solids. 369:55-60.
AbstractThe work deals with optical and structural properties of aluminophosphate glasses from Li2O–BaO–Al2O3–La2O3–P2O5 system containing Sm3+ and Eu3+ ions. X-ray fluorescence (XRF) has been used to establish the elemental composition of these materials. The influence of Sm3+ and Eu3+ ions on the optical properties of these glasses has been investigated in relation with their structural characteristics. The optical behavior of these materials has been studied by ultra-violet–visible (UV–Vis) spectroscopy, revealing absorption maxima specific to the doping ions. Structural information via vibration modes was provided by Fourier Transform Infrared (FTIR) absorption spectra evidenced as P–O–P symmetrical and asymmetrical stretching vibration modes, P–O–P bend, PO2- symmetrical and asymmetrical stretching vibration modes, P=O stretching vibration mode and P–O–H water absorbance. Raman spectra acquired by 514.5 nm laser excitation disclosed peaks specific to metaphosphate network. Information about the elemental compositional homogeneity of Sm3+ and Eu3+ -containing glasses as well as about the defects of the doped-glasses is revealed by scanning electron microscopy/energy dispersive spectrometry (SEM/EDS). Fluorescence spectroscopy measurements put in evidence important fluorescence peaks found at 596 nm and 643 nm for Sm3 + ions in phosphate matrix and 611 nm and 700 nm in the case of Eu3+ -doped glass.
Ramos, A.M., Pereira, Cidade, M.T., Pereira, Branquinho, R., Pereira, Martins, Fortunato E.
2013.
Preparation and characterization of cellulose nanocomposite hydrogels as functional electrolytes. Solid State Ionics. 242:26-32.
B.A, S, M. E, L. B, R.C.C. M.
2013.
Preparation method and thermal properties of samarium andeuropium-doped alumino-phosphate glasses. Materials Science and Engineering: B.
AbstractThe present work investigates alumino-phosphate glasses from Li2O–BaO–Al2O3–La2O3–P2O5 system containing Sm3+ and Eu3+ ions, prepared by two different ways: a wet raw materials mixing route followed by evaporation and melt-quenching, and by remelting of shards. The linear thermal expansion coefficient measured by dilatometry is identical for both rare-earth-doped phosphate glasses. Comparatively to undoped phosphate glass the linear thermal expansion coefficient increases with 2 × 10−7 K−1 when dopants are added. The characteristic temperatures very slowly decrease but can be considered constant with atomic weight, atomic number and f electrons number of the doping ions in the case of Tg (vitreous transition temperature) and Tsr (high annealing temperature) but slowly increase in the case of Tir (low annealing temperature–strain point) and very slowly increase, being practically constant in the case of TD (dilatometric softening temperature). Comparatively to undoped phosphate glass the characteristic temperatures of Sm and Eu-doped glasses present lower values. The higher values of electrical conductance for both doped glasses, comparatively to usual soda-lime-silicate glass, indicate a slightly reduced stability against water. The viscosity measurements, showed a quasi-linear variation with temperature the mean square deviation (R2) being ranged between 0.872% and 0.996%. The viscosity of doped glasses comparatively to the undoped one is lower at the same temperature. Thermogravimetric analysis did not show notable mass change for any of doped samples. DSC curves for both rare-earth-doped phosphate glasses, as bulk and powdered samples, showed Tg values in the range 435–450 °C. Bulk samples exhibited a very weak exothermic peak at about 685 °C, while powdered samples showed two weak exothermic peaks at about 555 °C and 685 °C due to devitrification of the glasses. Using designed melting and annealing programs, the doped glasses were improved regarding bubbles and cords content and strain elimination.
Lanca, T, Costa MF, Goncalves-Sousa N, Rei M, Grosso AR, Penido C, Silva-Santos B.
2013.
Protective role of the inflammatory CCR2/CCL2 chemokine pathway through recruitment of type 1 cytotoxic γδ T lymphocytes to tumor beds. J Immunol. 190:6673–6680., Number 12
AbstractTumor-infiltrating lymphocytes (TILs) are important prognostic factors in cancer progression and key players in cancer immunotherapy. Although γδ T lymphocytes can target a diversity of tumor cell types, their clinical manipulation is hampered by our limited knowledge of the molecular cues that determine γδ T cell migration toward tumors in vivo. In this study we set out to identify the chemotactic signals that orchestrate tumor infiltration by γδ T cells. We have used the preclinical transplantable B16 melanoma model to profile chemokines in tumor lesions and assess their impact on γδ TIL recruitment in vivo. We show that the inflammatory chemokine CCL2 and its receptor CCR2 are necessary for the accumulation of γδ TILs in B16 lesions, where they produce IFN-γ and display potent cytotoxic functions. Moreover, CCL2 directed γδ T cell migration in vitro toward tumor extracts, which was abrogated by anti-CCL2 neutralizing Abs. Strikingly, the lack of γδ TILs in TCRδ-deficient but also in CCR2-deficient mice enhanced tumor growth in vivo, thus revealing an unanticipated protective role for CCR2/CCL2 through the recruitment of γδ T cells. Importantly, we demonstrate that human Vδ1 T cells, but not their Vδ2 counterparts, express CCR2 and migrate to CCL2, whose expression is strongly deregulated in multiple human tumors of diverse origin, such as lung, prostate, liver, or breast cancer. This work identifies a novel protective role for CCL2/CCR2 in the tumor microenvironment, while opening new perspectives for modulation of human Vδ1 T cells in cancer immunotherapy.
Araújo, A, Barros R, Mateus T, Gaspar D, Neves N, Vicente A, Filonovich SA, Barquinha P, Fortunato E, Ferraria AM, do Rego ABM, Bicho A, Águas H, Martins R.
2013.
Role of a disperse carbon interlayer on the performances of tandem a-Si solar cells. Science and Technology of Advanced Materials. 14(4)
Amado, M, Rodrigues P, Poggi F, Freitas J.
2013.
Solar Urban Planning to EU 20-20-20 Targets. Portugal SB 13 - CONTRIBUTION OF SUSTAINABLE BUILDING TO MEET EU 20-20-20 TARGETS. :697-708., Guimaraes, PT: iiSBE PORTUGAL
Borlido, L, Moura L, Azevedo AM, Roque ACA, Aires‐Barros MR, Farinha JPS.
2013.
Stimuli‐Responsive magnetic nanoparticles for monoclonal antibody purification. Biotechnology Journal. 8(6):709–717.
AbstractMonoclonal antibodies (mAbs) are important therapeutic proteins. One of the challenges facing large-scale production of monoclonal antibodies is the capacity bottleneck in downstream processing, which can be circumvented by using magnetic stimuli-responsive polymer nanoparticles. In this work, stimuli-responsive magnetic particles composed of a magnetic poly(methyl methacrylate) core with a poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AA)) shell cross-linked with N, N'-methylenebisacrylamide were prepared by miniemulsion polymerization. The particles were shown to have an average hydrodynamic diameter of 317 nm at 18°C, which decreased to 277 nm at 41°C due to the collapse of the thermo-responsive shell. The particles were superparamagnetic in behavior and exhibited a saturation magnetization of 12.6 emu/g. Subsequently, we evaluated the potential of these negatively charged stimuli-responsive magnetic particles in the purification of a monoclonal antibody from a diafiltered CHO cell culture supernatant by cation exchange. The adsorption of antibodies onto P(NIPAM-co-AA)-coated nanoparticles was highly selective and allowed for the recovery of approximately 94% of the mAb. Different elution strategies were employed providing highly pure mAb fractions with host cell protein (HCP) removal greater than 98%. By exploring the stimuli-responsive properties of the particles, shorter magnetic separation times were possible without significant differences in product yield and purity.
Alves, C, Rodrigues, L. C., Andrade, J. R., Pawlicka, A., Pereira, Martins, Fortunato, Silva MM.
2013.
Study and Characterization of a Novel Polymer Electrolyte Based on Agar Doped with Magnesium Triflate. Molecular Crystals and Liquid Crystals. 570(1):1-11.
Amado, M, Lucas V, Ribeiro M.
2013.
Sustainable Construction: Value of Certification. Proc. of the Intl. Conf. on Advances in Civil, Structural and Environmental Engineering-- ACSEE 2013. :180-187., Zurich, CH: Institute of Research Engineers and Doctors
dos Santos, R, Rocha A, Matias A, Duarte C, de Sá-Nogueira I, Lourenco N, Borges JP, Vidinha P.
2013.
Development of antimicrobial Ion Jelly fibers. RSC Adv.. 3:24400-24405.: The Royal Society of Chemistry
AbstractWe report a method to obtain electrospun fibers based on ionic liquids and gelatin, exhibiting antimicrobial properties.
Seixas, JD, Mukhopadhyay A, Santos-Silva T, Otterbein LE, Gallo DJ, Rodrigues SS, Guerreiro BH, Goncalves AML, Penacho N, Marques AR, Coelho AC, Reis PM, Romao MJ, Romao CC.
2013.
Characterization of a versatile organometallic pro-drug (CORM) for experimental CO based therapeutics. Dalton Transactions. 42:5985-5998., Number 17
Abstractn/a
Oliveira, FS, Pereiro AB, Araujo JM, Bernardes CE, Canongia Lopes JN, Todorovic S, Feio G, Almeida PL, Rebelo LP, Marrucho IM.
2013.
High ionicity ionic liquids (HIILs): comparing the effect of ethylsulfonate and ethylsulfate anions. Phys Chem Chem Phys. 15:18138-47., Number 41
AbstractThe subject of ionicity has been extensively discussed in the last decade, due to the importance of understanding the thermodynamic and thermophysical behaviour of ionic liquids. In our previous work, we established that ionic liquids' ionicity could be improved by the dissolution of simple inorganic salts in their milieu. In this work, a comparison between the thermophysical properties of two binary systems of ionic liquid + inorganic salt is presented. The effect of the ammonium thiocyanate salt on the ionicity of two similar ionic liquids, 1-ethyl-3-methylimidazolium ethylsulfonate and ethylsulfate, is investigated in terms of the related thermophysical properties, such as density, viscosity and ionic conductivity in the temperature range 298.15-323.15 K. In addition, spectroscopic (NMR and Raman) and molecular dynamic studies were conducted in order to better understand the interactions that occur at a molecular level. The obtained results reveal that although the two anions of the ionic liquid exhibit similar chemical structures, the presence of one additional oxygen in the ethylsulfate anion has a major impact on the thermophysical properties of the studied systems.