We report herein for the first-time acid biomass-derived carbons from vegetal biomass, with high developed porosity, prepared through integrating method comprising pyrolysis and surface phosphonation, able to efficiently catalyze the synthesis of quinoxalines from 1,2-diamines and α-hydroxi ketones, under aerobic conditions. The obtained results indicate that the reaction is mainly driven by a combination of acid function strength and textural properties in terms of conversion and selectivity. Furthermore, our experimental and theoretical observations suggest that the preferred reaction pathway for this transformation, in the presence of the investigated acid carbon catalysts, involves cascade reactions including imination reaction between reactants, successive imine-enamine and keto-enol tautomerisms, heterocyclization followed by dehydration, and aromatization. While the acid sites seem to be a relevant role in each reaction step, the system formed by activated carbon and molecular oxygen could be behind the last oxidative reaction to give the corresponding nitrogen heterocycles.

Eco-sustainable and recyclable porous carbons are reported as metal-free catalysts for the synthesis of benzodiazepines for the first time. The porous carbons were able to efficiently catalyse the synthesis of benzodiazepine 1 from o-phenylendiamine 2 and acetone 3 under mild conditions. Both acidic functions and the porosity of the catalysts were determinant features. High conversion values were obtained when using HNO3 oxidized carbons. The highest selectivity to benzodiazepine 1 was obtained in the presence of the most microporous catalyst N-N, which is indicative of the great influence of porous properties. Stronger acid sites and high microporosity of the carbon treated with H2SO4 yield benzodiazepine 1 with total selectivity.

Chromium is one of the most important raw materials for the European Union. Adsorption has become an important process for the recovery of metals from wastewaters, which has led to a demand for low-cost and eco-friendly adsorbents. The objective of this work was to use new and renewable carbon-based adsorbents from rice wastes in the removal/recovery of Cr(III) from synthetic and real wastewaters. Rice wastes were submitted to co-pyrolysis and the resulting char was optimized through physical and/or chemical activations/treatments. A commercial activated carbon was used for comparison purposes. All adsorbents were characterized (including an ecotoxicity test for the char precursor) and submitted to Cr(III) removal assays from a synthetic solution, in which two solid/liquid ratios (S/L) were tested (5 and 10 g/L). The CO2 activated carbon at a S/L = 5 g/L was the biomass-derived adsorbent that performed better, obtaining a maximum Cr(III) uptake capacity of 9.23 mg/g comparable to the one obtained by the commercial adsorbent at the same S/L (9.80 mg/g). The good results on this biomass-derived carbon were due to the effective volatile matter removal during the activation (from 22.7 to 4.25% w/w), which increased both surface area (from <5.0 to 325 m2/g) and ash content (from 30.0 to 40.4% w/w), allowing an increase in Cr(III) removal due to ion exchange mechanism and porosity development. The best adsorbent, under optimized conditions, was also applied to a chromium rich industrial wastewater. The results obtained in this real case application demonstrated a competition effect due to the presence of other ions.

Background The awareness of environmental and socio-economic impacts caused by greenhouse gas emissions from the livestock sector leverages the adoption of strategies to counteract it. Feed supplements can play an important role in the reduction of the main greenhouse gas produced by ruminants—methane (CH\textsubscript{4}). In this context, this study aims to assess the effect of two biochar sources and inclusion levels on rumen fermentation parameters \textit{in vitro}. Methods Two sources of biochar (agro-forestry residues, AFB, and potato peel, PPB) were added at two levels (5 and 10%, dry matter (DM) basis) to two basal substrates (haylage and corn silage) and incubated 24-h with rumen inocula to assess the effects on CH\textsubscript{4} production and main rumen fermentation parameters \textit{in vitro}. Results AFB and PPB were obtained at different carbonization conditions resulting in different apparent surface areas, ash content, pH at the point of zero charge (pHpzc), and elemental analysis. Relative to control (0% biochar), biochar supplementation kept unaffected total gas production and yield (mL and mL/g DM, \textit{p} = 0.140 and \textit{p} = 0.240, respectively) and fermentation pH (\textit{p} = 0.666), increased CH\textsubscript{4}production and yield (mL and mL/g DM, respectively, \textit{p} = 0.001) and ammonia-N (NH\textsubscript{3}-N, \textit{p} = 0.040), and decreased total volatile fatty acids (VFA) production (\textit{p} < 0.001) and H\textsubscript{2} generated and consumed (\textit{p} ≤ 0.001). Biochar sources and inclusion levels had no negative effect on most of the fermentation parameters and efficiency. Acetic:propionic acid ratio (\textit{p} = 0.048) and H\textsubscript{2} consumed (\textit{p} = 0.019) were lower with AFB inclusion when compared to PPB. Biochar inclusion at 10% reduced H\textsubscript{2} consumed (\textit{p} < 0.001) and tended to reduce total gas production (\textit{p} = 0.055). Total VFA production (\textit{p} = 0.019), acetic acid proportion (\textit{p} = 0.011) and H\textsubscript{2} generated (\textit{p} = 0.048) were the lowest with AFB supplemented at 10%, no differences being observed among the other treatments. The basal substrate affected most fermentation parameters independently of biochar source and level used. Discussion Biochar supplementation increased NH\textsubscript{3}-N content, \textit{iso}-butyric, \textit{iso}-valeric and valeric acid proportions, and decreased VFA production suggesting a reduced energy supply for microbial growth, higher proteolysis and deamination of substrate N, and a decrease of NH\textsubscript{3}-N incorporation into microbial protein. No interaction was found between substrate and biochar source or level on any of the parameters measured. Although AFB and PPB had different textural and compositional characteristics, their effects on the rumen fermentation parameters were similar, the only observed effects being due to AFB included at 10%. Biochar supplementation promoted CH\textsubscript{4} production regardless of the source and inclusion level, suggesting that there may be other effects beyond biomass and temperature of production of biochar, highlighting the need to consider other characteristics to better identify the mechanism by which biochar may influence CH\textsubscript{4} production.

The work reports the impregnation of naproxen into locust bean gum mesoporous matrixes with different textural properties. The matrixes were prepared through the dissolution of the biopolymer in water and in two ionic liquids (ILs): [bmim][Cl] and [C2OHmim][Cl] and dried with scCO2. The poor water-soluble pharmaceutical drug naproxen was loaded into the matrixes and the composites were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy and by differential scanning calorimetry; the results were compared with neat ILs and drug. The naproxen release from the matrixes was attempted at pH 7.4. Sustained release of naproxen in the different composites occurs, and consequently the naproxen release has lower rates compared with neat crystalline naproxen dissolution. Nevertheless, it was possible to observe small differences on release profiles for the studied composites. The higher release rate was observed for the composite where [bmim][Cl] was used as solvent, for which the calorimetric analysis revealed full amorphization of the incorporated drug. Cytotoxicity assays reveal that cellular viability in Caco-2 cells is preserved. This fact allied with the biocompatibility of locust bean gum allow for the composites potential application as naproxen controlled/sustained delivery systems with higher drug bioavailability achieved through naproxen amorphization.

We report herein for the first-time acid biomass-derived carbons from vegetal biomass, with high developed porosity, prepared through integrating method comprising pyrolysis and surface phosphonation, able to efficiently catalyze the synthesis of quinoxalines from 1,2-diamines and α-hydroxi ketones, under aerobic conditions. The obtained results indicate that the reaction is mainly driven by a combination of acid function strength and textural properties in terms of conversion and selectivity. Furthermore, our experimental and theoretical observations suggest that the preferred reaction pathway for this transformation, in the presence of the investigated acid carbon catalysts, involves cascade reactions including imination reaction between reactants, successive imine-enamine and keto-enol tautomerisms, heterocyclization followed by dehydration, and aromatization. While the acid sites seem to be a relevant role in each reaction step, the system formed by activated carbon and molecular oxygen could be behind the last oxidative reaction to give the corresponding nitrogen heterocycles.

This work reports the synthesis of kappa-carrageenan aerogels using different dissolution and crosslinking media in order to evaluate its effects on the textural properties of the matrixes and further on the drug loading and release performance. The different aerogel samples were produced through the dissolution of the biopolymer in water with addition of potassium salts as crosslinking agents and, in two different ionic liquids (ILs) derived from imidazolium ion, being further dried with supercritical CO2. The samples were characterized by Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), Nitrogen Adsorption-Desorption Analysis, Thermogravimetry (TGA) and Differential Scanning Calorimetry (DSC). The synthesized samples presented surface areas similar to the carrageenan aerogels being their structure constituted mainly by meso and macropores. The absence of ionic liquid in samples was demonstrated by DSC analysis and was corroborated by the cytotoxicity assays which revealed that cellular viability in Caco-2 cells was preserved. Tetracycline was used as a model drug and loaded in two of the prepared aerogels samples. The release experiments were performed with the composites to test in vitro drug release at physiologic pH. With a higher macroporosity, the kappa-carrageenan aerogel prepared by dissolution into ionic liquid showed a higher loading capacity than the one prepared by dissolution into water and a slightly higher release rate. The matrixes were considered to present a good potential to be used as biocompatible carriers on drug controlled delivery.

Aiming to rationalize the release profile of an incorporated pharmaceutical drug in terms of its mobility, driven by guest-host interactions, the poorly water-soluble ibuprofen drug was loaded in a mesoporous inorganic silica matrix with unmodified (MCM-41) and modified surface (MCM-41sil) by post-synthesis silylation, both having pore sizes   3 nm. The single calorimetric detection of a broad glass transition step for both ibuprofen composites indicates full drug amorphization, confirmed by the only appearance of an amorphous halo in the powder XRD patterns. Moreover, a gradient profile is disclosed by the heat flux derivative plot in the glass transition, in coherence with the thermogravimetric profile that shows a multi-step decomposition trace for confined ibuprofen in these matrixes. While identical guest dynamics, as probed by dielectric relaxation spectroscopy, were found in both dehydrated composites, a significant molecular population with faster relaxation exists in the hydrated state for the drug inside the unmodified matrix. This was rationalized as the concurrence of true confinement effects, which manifest under nanometer dimensions, and greater water affinity of the unmodified matrix, forcing the drug molecules to be placed mostly in the pore core. Finite size effects are also felt in both dehydrated composites, however guest-host interactions give origin to a dominant population with slowed down mobility that governs the overall guest dynamics. In spite of an inferior number of active sites for drug adsorption in the silylated matrix, a faster ibuprofen delivery in phosphate buffer (pH = 6.8) was observed when the drug is released from unmodified MCM-41 in the hydrated state. Therefore, our results suggest that a relevant role is played by water molecules, which impair a strong guest adsorption in the host surface more efficiently than the limited surface modification, influence the higher ratio of a faster population in the pore core and facilitate the diffusion of the aqueous releasing media inside pores.