Mesoporous silica nanoparticles (MSNs) strategically functionalized were used to immobilize a homogeneous polyoxomolybdate catalyst {[}PMo12O40](3-) (PMo12), active but unstable. The PMo12@TBA-MSN composite (where TBA refers to surface-tethered tributylammonium groups) conferred high stability to the polyoxomolybdate catalytic center and displayed an increase in efficiency for the oxidative desulfurization (ECODS) of a diesel simulant under sustainable conditions (using H2O2 as oxidant and an ionic liquid, {[}BMIM]PF6, as solvent). Continuous reuse of the catalyst and ionic liquid solvent in consecutive ECODS cycles was successfully performed, avoiding the production of residual wastes. The performance of the PMo12@TBA-MSN catalyst improved upon its reuse, leading to complete desulfurization of a multicomponent model diesel containing benzothiophene derivatives after just 1 h of the catalytic stage of the process. The robust nature of the supported catalyst was indicated by characterization of the recovered solid which showed retention of the structural and chemical integrities.

Download Article
Export citation
1,049
TOTAL VIEWS
Article has an altmetric score of 3

Suggest a Research Topic >

SHARE ON
0
0
0
New

ORIGINAL RESEARCH ARTICLE
Front. Chem., 14 November 2019 | https://doi.org/10.3389/fchem.2019.00756
Mesoporous Silica vs. Organosilica Composites to Desulfurize Diesel
Susana O. Ribeiro1, Carlos M. Granadeiro1, Marta C. Corvo2, João Pires3, José M. Campos-Martin4, Baltazar de Castro1 and Salete S. Balula1*
1LAQV-REQUIMTE, Departamento de Química e Bioquímica, Faculdade de Ciências, Universidade Do Porto, Porto, Portugal
2CENIMAT/I3N, Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Caparica, Portugal
3Faculdade de Ciências, Centro de Química e Bioquímica and CQE, Universidade de Lisboa, Lisbon, Portugal
4Grupo de Energía y Química Sostenibles (EQS), Instituto de Catálisis y Petroleoquímica, CSIC, Madrid, Spain
The monolacunary Keggin-type [PW11O39]7− (PW11) heteropolyanion was immobilized on porous framework of mesoporous silicas, namely SBA-15 and an ethylene-bridged periodic mesoporous organosilica (PMOE). The supports were functionalized with a cationic group (N-trimethoxysilypropyl-N, N, N-trimethylammonium, TMA) for the successful anchoring of the anionic polyoxometalate. The PW11@TMA-SBA-15 and PW11@TMA-PMOE composites were evaluated as heterogeneous catalysts in the oxidative desulfurization of a model diesel. The PW11@TMA-SBA-15 catalyst showed a remarkable desulfurization performance by reaching ultra-low sulfur levels (<10 ppm) after only 60 min using either a biphasic extractive and catalytic oxidative desulfurization (ECODS) system (1:1 MeCN/diesel) or a solvent-free catalytic oxidative desulfurization (CODS) system. Furthermore, the mesoporous silica composite was able to be recycled for six consecutive cycles without any apparent loss of activity. The promising results have led to the application of the catalyst in the desulfurization of an untreated real diesel supplied by CEPSA (1,335 ppm S) using the biphasic system. The system has proved to be a highly efficient process by reaching desulfurization values higher than 90% for real diesel during three consecutive cycles.

Ionic liquids have been on the spotlight of chemical research field in the last decades. Their physical properties (low vapor pressure, thermal stability, and conductivity) and the possibility of fine tuning make them a versatile class of compounds for a wide range of applications, such as catalysis, energy, and material sciences. Ionic liquids can establish multiple intermolecular interactions with solutes such as electrostatic, van der Waals, or hydrogen bonds. The prospect of designing ionic liquid structures toward specific applications has attracted the attention to these alternative solvents. However, their rational design demands a molecular detailed view, and Nuclear Magnetic Resonance is a unique and privileged technique for this purpose, as it provides atomic resolution and at the same time enables the study of dynamic information. In this chapter, we provide an overview about the application of Nuclear Magnetic Resonance spectroscopy techniques as a methodology for the rational design of ionic liquids as solvents for small organic compounds, CO2 capture, and polymers such as cellulose focusing mainly in the last 10 years.

This study was developed with the purpose to investigate the effect of polysaccharide/plasticiser concentration on the microstructure and molecular dynamics of polymeric film systems, using transmission electron microscope imaging (TEM) and nuclear magnetic resonance (NMR) techniques. Experiments were carried out in chitosan/glycerol films prepared with solutions of different composition. The films obtained after drying and equilibration were characterised in terms of composition, thickness and water activity. Results show that glycerol quantities used in film forming solutions were responsible for films composition; while polymer/total plasticiser ratio in the solution determined the thickness (and thus structure) of the films. These results were confirmed by TEM. NMR allowed understanding the films molecular rearrangement. Two different behaviours for the two components analysed, water and glycerol were observed: the first is predominantly moving free in the matrix, while glycerol is mainly bounded to the chitosan chain.

In this work 2H NMR spectroscopy and 1H NMR relaxometry and diffusometry were used to characterise water order and dynamics in cellulose acetate/silica asymmetric membranes. Two hydrated membranes were characterised allowing the identification of extra ordering of the water molecules and the presence in each membrane of up to two spectral components with different degrees of order and different T1 values. The mechanism behind this order increase was ascribed to the rapid exchange of the water molecules between the pore walls and its interior. T1 relaxometry dispersions allowed for the identification of the relevant mechanisms of pore-confined water motion, with rotations mediated by translational displacements (RMTD) as the dominant mechanism in the low frequency region. Using the RMTD low cut off frequency along with the in situ directly measured diffusion constant it was possible do determine characteristic lengths of correlated water motion in both membranes studied, which fall in ranges compatible with typical pore dimensions in similar membranes.