Tuberculosis (TB) is one of the leading causes of infection in humans, causing high morbility and mortality all over the world. The rate of new cases of multidrug resistant tuberculosis (MDRTB) continues to increase, and since these infections are very difficult to manage, they constitute a serious health problem. In most cases, drug resistance in Mycobacterium tuberculosis has been related to mutations in several loci within the pathogen's genome. The development of fast, cheap and simple screening methodologies would be of paramount relevance for the early detection of these mutations, essential for the timely and effective diagnosis and management of MDRTB patients. The use of gold nanoparticles derivatized with thiol-modified oligonucleotides (Au-nanoprobes) has led to new approaches in molecular diagnostics. Based on the differential non-cross-linking aggregation of Au-nanoprobes, we were able to develop a colorimetric method for the detection of specific sequences and to apply this approach to pathogen identification and single base mutations/single nucleotide polymorphisms (SNP) discrimination. Here we report on the development of Au-nanoprobes for the specific identification of SNPs within the beta subunit of the RNA polymerase (rpoB locus), responsible for resistance to rifampicin in over 95% of rifampicin resistant M. tuberculosis strains.

A novel magnetic support based on gum Arabic {(GA)} coated iron oxide magnetic nanoparticles {(MNP)} has been endowed with affinity properties towards immunoglobulin G {(IgG)} molecules. The success of the in situ triazine ligand synthesis was confirmed by fluorescence assays. Two synthetic ligands previously developed for binding to {IgG}, named as ligand 22/8 (artificial Protein A) and ligand 8/7 (artificial Protein L) were immobilized on to {MNPs} coated with {GA} {(MNP\_GA).} The dimension of the particles core was not affected by the surface functionalization with {GA} and triazine ligands. The hydrodynamic diameters of the magnetic supports indicate that the coupling of {GA} leads to the formation of larger agglomerates of particles with about 1 microm, but the introduction of the triazine ligands leads to a decrease on {MNPs} size. The non-functionalized {MNP\_GA} bound 28 mg {IgG/g}, two times less than bare {MNP} (60 mg {IgG/g).} {MNP\_GA} modified with ligand 22/8 bound 133 mg {IgG/g} support, twice higher than the value obtained for ligand 8/7 magnetic adsorbents (65 mg/g). Supports modified with ligand 22/8 were selected to study the adsorption and the elution of {IgG.} The adsorption of human {IgG} on this support followed a Langmuir behavior with a Q(máx) of 344 mg {IgG/g} support and K(a) of 1.5 x 10(5) M. The studies on different elution conditions indicated that although the 0.05 M citrate buffer {(pH} 3) presented good recovery yields (elution 64% of bound protein), there was occurrence of iron leaching at this acidic {pH.} Therefore, a potential alternative would be to elute bound protein with a 0.05 M {glycine-NaOH} {(pH} 11) buffer.

Several ultrasound-based platforms for DNA sample preparation were evaluated in terms of effective fragmentation of DNA (plasmid and genomic DNA)-ultrasonic probe, sonoreactor, ultrasonic bath and the newest Vialtweeter device. The sonoreactor showed the best efficiency of DNA fragmentation while simultaneously assuring no cross-contamination of samples, and was considered the best ultrasonic tool to achieve effective fragmentation of DNA at high-throughput and avoid sample overheating. Several operation variables were studied-ultrasonication time and amplitude, DNA concentration, sample volume and sample pre-treatment-that allowed optimisation of a sonoreactor-based strategy for effective DNA fragmentation. Optimal operating conditions to achieve DNA fragmentation were set to 100% ultrasonic amplitude, 100 μL sample volume, 8 min ultrasonic treatment (2 min/sample) for a DNA concentration of 100 μg mL-1. The proposed ultrasonication strategy can be easily implemented in any laboratory setup, providing fast, simple and reliable means for effective DNA sample preparation when fragmentation is critical for downstream molecular detection and diagnostics protocols.

The investigation of 3,4-methylenedioxymethamphetamine (MDMA: ecstasy) abuse requires very robust methods with high sensitivity and wide linearity ranges for the quantification of this drug of abuse and its main metabolites in body fluids. An optimized gas chromatography-ion trap mass spectrometry (GC-IT/MS) methodology with electron impact ionization addressing these issues is presented. The sample preparation involves an enzymatic hydrolysis of urine and plasma for conjugate cleavage, a SPE extraction, and a derivatization process. The method was fully validated in rat plasma and urine. Linearity for a wide concentration range was achieved for MDMA, and the metabolites 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxyamphetamine (HMA) and 4-hydroxy-3-methoxymethamphetamine (HMMA). Limits of quantification were 2 ng/mL in plasma and 3.5 ng/mL in urine using a Selected Ion Monitoring detection mode. Selectivity, accuracy, precision, and recovery met the required criteria for the method validation. This GC-IT/MS method provides high sensitivity and adequate performance characteristics for the simultaneous quantification of MDMA, MDA, HMA and HMMA in the studied matrices. (C) 2010 Elsevier B.V. All rights reserved.

The present invention relates to a colorimetric method for the detection of specific nucleic acids sequences, including mutations or single nucleotide polymorphisms within nucleic acid sequences, through the aggregation of nanoparticles functionalized with modified oligonucleotides, induced by an increase of the medium's ionic strength. Another aspect of the present invention relates with the development of a kit based on the method of the present invention, allowing for a quick and easy detection of specific nucleic acids sequences, including mutations or single nucleotide polymorphisms within nucleic acid sequences.

Mercury, methyl-mercury (MeHg) and selenium were determined in digestive gland and mantle of Octopus vulgaris, from three areas of the Portuguese coast. To our knowledge these are the first data on MeHg in cephalopods. Concentrations were higher in the digestive gland and percentage of MeHg in mantle. Enhanced Hg and MeHg levels were obtained in digestive gland of specimens from Olhao (3.1-7.4 and 2.0-5.0 mu g g(-1) respectively). Differences between areas may be partially related to Hg availability. Relationships between concentrations in mantle and digestive gland pointed to proportional increases of Hg and MeHg in tissues of specimens from Matosinhos and Cascais, but relatively constant values in mantle of individuals from Olhao (higher contamination). Se:Hg molar ratio in digestive gland was 32 and 30 in octopus from Matosinhos and Cascais, respectively, and 5.4 from Olhao. The proximity to the unit suggests demethylation as response to elevated MeHg levels in digestive gland. (C) 2010 Elsevier Ltd. All rights reserved.

We recently reported on the use of caged nucleotides to attain full control of enzymatic polymerization of RNA solely by light. In the absence of light no RNA formation was possible due to the efficient caging by the coumarin moiety; after irradiation, caged ATP was released with quantitative precision and RNA polymerization was resumed. As photolabile protecting group [7-(diethylamino) coumarin-4-yl]methyl] (DEACM) was used due to its high absorbance in the visible region of the spectrum, fast deprotection kinetics and absence of radical intermediates. However, the 7-diethylamino-4-hydroxymethylcoumarin photo-product (DEACM-OH) was shown to inhibit the transcription reaction for concentrations higher than 30 μM [5]. This inhibition has been associated with poor water solubility, which is commonly dealt with via cumbersome chemical modifications of the protecting moiety. To overcome inhibition, we evaluated the use of molecular scavengers to sequester DEACM-OH formed after irradiation. Determination of association constants of coumarin with β-cyclodextrins allowed the assessment of its capability to remove free coumarin molecules from solution. The influence of β-cyclodextrin in transcription reaction was also assessed. Results show that β-cyclodextrin can be successfully used as scavenger as it increases the DEACM-OH threshold concentration for inhibition, amplifying the efficiency of light controlled in vitro transcription.

The derivatization of gold-silver alloy nanoparticles with thiol-ssDNA oligonucleotides (AuAg-alloy-nanoprobes) and their use in nucleic acid detection is presented. A non-cross-linking method has been previously developed by our group using gold nanoparticles, which is based on the colorimetric comparison of solutions before and after salt-induced nanoprobe aggregation. Only the presence of a complementary target stabilizes the nanoprobe, preventing aggregation and colorimetric change after salt addition. Through this approach, the AuAg-alloy-nanoprobes allowed to specifically detect a sequence derived from the RNA polymerase β-subunit gene of Mycobacterium tuberculosis, the etiologic agent of human tuberculosis, with a 2.5-fold enhanced sensitivity (0.3 μg of total DNA) when compared to their gold counterparts.

The present invention relates to a colorimetric method for the detection of specific nucleic acids sequences, including mutations or single nucleotide polymorphisms within nucleic acid sequences, through the aggregation of nanoparticles functionalized with modified oligonucleotides, induced by an increase of the medium's ionic strength. Another aspect of the present invention relates with the development of a kit based on the method of the present invention, allowing for a quick and easy detection of specific nucleic acids sequences, including mutations or single nucleotide polymorphisms within nucleic acid sequences.

A dye sensitized TiO2 photodetector has been integrated with a DNA detection method based on non-cross-linking hybridization of DNA-functionalized gold nanoparticles, resulting in a disposable colorimetric biosensor. We present a new approach for the fabrication of dye sensitized TiO2 photodetectors by an inkjet printing technique-a non-contact digital, additive, no mask and no vacuum patterning method, ideal for cost efficient mass production. The developed biosensor was compared against a dye sensitized photodetector fabricated by the traditional {"}doctor blade{"} method. Detection of gold nanoparticle aggregation was possible for concentrations as low as 1.0 nM for the {"}doctor blade{"} system, and 1.5 nM for the inkjet printed photodetector. The demonstrated sensitivity limits of developed biosensors; are comparable to those of spectrophotometric techniques (1.0 nM). Our results show that a difference higher than 17% by traditional photodetector and 6% by inkjet printed in the photoresponses for the complementary and non-complementary gold nanoprobe assays could be attained for a specific DNA sequence from Mycobacterium tuberculosis, the etiologic agent of human tuberculosis. The decrease of costs associated with molecular diagnostic provided by a platform such as the one presented here may prove of paramount importance in developing countries. (C) 2009 Elsevier B.V. All rights reserved.

Gold nanoparticles functionalized with thiol-oligonucleotides are ideal platforms for detection of specific DNA sequences. Here we evaluate the effect of single base mismatches in hybridization efficiency according to the position of the mismatch, base pairing combination and thiol-oligonucleotide density in terms of specificity and efficiency of target recognition. Hybridization efficiency and single-nucleotide polymorphism discrimination at room temperature is maximized at a density of 83 +/- 4 thiol-oligonucleotides per 13.5 nm gold nanoparticle (24 pmol/cm(2)), and when the mismatch is localized at the 3'-end of the Au-nanoprobe, i.e. away from the gold nanoparticle surface. (C) 2010 Elsevier B.V. All rights reserved.

The present invention relates to a system and process for detection and/or qualitative and quantitative identification of the biological material, such as specific sequences of nucleic acids or proteins as antibodies, present in biological samples. The system is composed by one or more light sources (1) combined with one or more integrated optical photo sensors, or not, and various electronic components (4), necessary for obtaining/processing of the signal emitted by the metal nanoprobes functionalized with a solution of biological composite, as well as also a micro-controller and a microprocessor, fixed or portable. This photosensor structure is able to detect and to quantify the colour variations produced by metal nanoprobes, being this preferentially gold, functionalized by oligonucleotides complementary to specific DNA/RNA sequences, proteins, as for instance antibodies and/or antigens related with certain disease, or other sample or solution of biological composite, that are to be investigated. The detection and quantification process is based on the response of a photosensor, singular or integrated, based on thin film technology of amorphous, nanocrystalline or microcrystalline silicon and their alloys, as well as the new active ceramic semiconductors, amorphous and not amorphous.

This paper reports the design, preparation and characterization of cellulose affinity membranes for antibody purification using a new methodology. Cellulose membranes were prepared from polymer-ionic liquid solutions, namely 1-butyl-3-methylimidazolium chloride {([BMIM][Cl])}, by the water induced phase inversion process. After functionalization with a synthetic ligand 2-(3-aminophenol)-6-(4-amino-1-naphthol)-4-chloro-s-triazine (ligand 22/8), these were evaluated as affinity supports for human immunoglobulin G {(IgG).} Membranes were characterized in terms of morphology {(SEM)}, porosity (mercury porosimetry), hydrophilicity (contact angle measurement), transport properties (permeability) and mechanical performance {(DMA).} Membranes prepared with varying cellulose contents (5 and 10&\#xa0;wt.% cellulose in ionic liquid solutions) lead to films with different properties. The 10&\#xa0;wt.% cellulose membrane presented enhanced morphological and mechanical properties, however, the morphology of this membrane was significantly altered after ligand coupling. Adsorption isotherms for human {IgG} onto 10&\#xa0;wt.% matrix activated with ligand 22/8 were obtained. Preliminary results showed that the bovine serum albumin {(BSA)}, a model impurity, did not adsorb onto the membrane while up to 6&\#xa0;mg {IgG/g} was bound and 2&\#xa0;mg {IgG/g} recovered.

Molecular nanodiagnostics applied to cancer may provide rapid and sensitive detection of cancer related molecular alterations, which would enable early detection even when those alterations occur only in a small percentage of cells. The use of gold nanoparticles derivatized with thiol modified oligonucleotides (Au-nanoprobes) for the detection of specific nucleic acid targets has been gaining momentum as an alternative to more traditional methodologies. Here, we present an Au-nanoparticles based approach for the molecular recognition and quantification of the BCR-ABL usion transcript (mRNA), which is responsible for chronic myeloid leukemia (CML), and to the best of our knowledge it is the first time quantification of a specific mRNA directly in cancer cells is reported. This inexpensive and very easy to perform Au-nanoprobe based method allows quantification of unamplified total human RNA and specific detection of the oncogene transcript. The sensitivity settled by the Au-nanoprobes allows differential gene expression from 10 ng/μl of total RNA and takes less than 30 min to complete after total RNA extraction, minimizing RNA degradation. Also, at later stages, accumulation of malignant mutations may lead to resistance to chemotherapy and consequently poor outcome. Such a method, allowing for fast and direct detection and quantification of the chimeric BCR-ABL mRNA, could speed up diagnostics and, if appropriate, revision of therapy. This assay may constitute a promising tool in early diagnosis of CML and could easily be extended to further target genes with proven involvement in cancer development.

Single-walled carbon nanotubes (SWCNTs) deposits on glassy carbon and pyrolytic graphite electrodes have dramatically enhanced the direct electron transfer of the multihemic nitrite reductase from Desulfovibrio desulfuricans ATCC 27774, enabling a 10-fold increase in catalytic currents. At optimal conditions, the sensitivity to nitrite and the maximum current density were 2.4 +/- 0.1 A L mol(-1) cm(-2) and 1500 mu A cm(-2), respectively. Since the biosensor performance decreased over time, laponite clay and electropolymerized amphiphilic pyrrole were tested as protecting layers. Both coating materials increased substantially the bioelectrode stability, which kept about 90% and 60% of its initial sensitivity to nitrite after 20 and 248 days, respectively.

The use of gold nanoparticles (AuNPs) has been gaining momentum as vectors for gene silencing strategies, combining the AuNPs' ease of functionalization with DNA and/or siRNA, high loading capacity and fast uptake by target cells. Here, we used AuNP functionalized with thiolated oligonucleotides to specifically inhibit transcription in vitro, demonstrating the synergetic effect between AuNPs and a specific antisense sequence that blocks the T7 promoter region. Also, AuNPs efficiently protect the antisense oligonucleotide against nuclease degradation, which can thus retain its inhibitory potential. In addition, we demonstrate that AuNPs functionalized with a thiolated oligonucleotide complementary to the ribosome binding site and the start codon, effectively shut down in vitro translation. Together, these two approaches can provide for a simple yet robust experimental set up to test for efficient gene silencing of AuNP-DNA conjugates. What is more, these results show that appropriate functionalization of AuNPs can be used as a dual targeting approach to an enhanced control of gene expression-inhibition of both transcription and translation.

There are numerous reports of coumarin ester derivatives, in particular phosphate esters, as photocleavable cages in biological systems. Despite the comprehensive analysis of the photocleavage mechanism, studies of 4-methylcoumarin caged phosphates and/or nucleotides were always performed at constant pH. In this work, we present the study of the pH effect on the photochemistry of (7-diethylaminocoumarin-4-yl)methyl phosphate (DEACM-P). Fluorescence and photocleavage quantum yields, as well as the fluorescence decay times were measured as a function of the pH. It was found that the pH produces significant changes in the overall photochemical quantum yield of DEACM-P, and the observed changes are complementary to those obtained from the fluorescence quantum yield. Deprotonation of DEACM-HPO4 - to yield DEACM-PO4 2-, produces a decrease in the photochemical quantum yield (from 0.0045 to 0.0003) and an increase in the fluorescence quantum yield (from 0.072 to 0.092). Moreover, from the analysis of the decay times, we have also found that hydroxyl ion is not only relevant, but it is mechanistically involved in the photoreaction of DEACM-HPO4 -.

n/a

3,4-Methylenedioxymethamphetamine (MDMA; ecstasy), a drug of abuse commonly consumed at rave parties, is often taken in a polydrug abuse scenario, ethanol being one of the most associated drugs. Both MDMA and ethanol are mainly metabolized in the liver with formation of toxic metabolites. Our working hypothesis is that ethanol can modify the metabolism of MDMA through the cytochrome P450 system, and that this effect may be further potentiated by hyperthermia, a well-known consequence of MDMA abuse. To investigate these putative interactions we used primary rat hepatocyte cultures, which were exposed to 300 mM ethanol, 1.6 mM MDMA and the combination of both, at normothermic (36.5 degrees C) and hyperthermic (40.5 degrees C) conditions. After 24 h, the levels of MDA, HMA and HMMA in the cell culture medium were quantified by GC/MS. In addition, we repeated the same experimental design preceded by 1 h incubation with 0.18 mu M ketoconazole or 150 mu M diallyl sulphide (CYP3A and CYP2E1 inhibitors, respectively), to evaluate the putative role of these isoenzymes in the observed effects. The results obtained showed that ethanol exposure increases the formation of some MDMA metabolites such as HMA (1.8 times increase) and MDA (1.5 times increase). This effect was markedly increased under hyperthermic conditions (HMA, MDA and HMMA formation increased 10,6 and 16 times, respectively) and is mediated, at least partially, by CYP3A and CYP2E1. (C) 2010 Elsevier Ireland Ltd. All rights reserved.