In the field of cellulosic liquid crystals, attempts to establish the relationship between structure/properties have been developed. Above a critical concentration in an aqueous solution, hydroxypropylcellulose self-assembles in order to form cholesteric liquid crystal phases (LC-HPC). In this work we aim to understand how the incorporation of a low content of cellulose nanocrystals (CNC) within LC-HPC/H2O (50 wt%), could influence the behaviour of the system when subjected to low shear rates, where the cholesteric phase still persists. The analysis of the deuterium spectrum and the T2 (transversal relaxation) values confirm that the mobility of LC-HPC at low shear rates is restricted due to CNC, and consequently so is the flow of the cholesteric polydomains. These effects are more evident in the LC-HPC sample containing 2 wt% of CNC; besides needing more strain units to induce some degree of order, the achieved degree of order is recovered faster when compared to the reference sample.

{The Keggin phosphotungstate (PW12) and its zinc derivative (PW11Zn) were tested as oxidative catalysts for desulfurization processes using simulated and real diesels. These compounds were used as homogeneous catalysts, while the corresponding SBA-15 composites were used as heterogeneous catalysts. The comparison of their catalytic performance demonstrated that the zinc-substituted polyoxo-metalate is more efficient than the plenary PW12 structure. Additionally, using the heterogeneous PW11Zn@aptesSBA-15, the sustainability and catalytic efficiency was largely improved, allowing the total sulfur removal from model diesel after 1 h using a small amount of oxidant (H2O2/S = 4) under an oxidative solvent-free system. The desulfurization of real diesels was performed under similar conditions, achieving 87.8% of efficiency using the PW11Zn@aptesSBA-15 catalyst. Furthermore, the catalyst maintained its activity over consecutive desulfurization cycles. The cost-effective operational conditions achieved with PW11Zn@aptesSBA-15 turn this into a promising material to be used in an industrial scale to treat diesel.}

Oleic acid coated iron oxide nanoparticles synthesized by thermal decomposition in organic medium are highly monodisperse but at the same time are unsuitable for biological applications. Ligand-exchange reactions are useful to make their surface hydrophilic. However, these could alter some structural and magnetic properties of the modified particles. Here we present a comprehensive study and comparison of the effects of employing either citric acid (CA) or meso-2,3-dimercaptosuccinic acid (DMSA) ligand-exchange protocols for phase transfer of monodisperse hydrophobic iron oxide nanoparticles produced by thermal decomposition of Fe(acac)3 in benzyl ether. We show the excellent hydrodynamic size distribution and colloidal stability of the hydrophilic particles obtained by the two protocols and confirm that there is a certain degree of oxidation caused by the ligand-exchange. CA revealed to be more aggressive towards the iron oxide surface than DMSA and greatly reduced the saturation magnetization values and initial susceptibility of the resulting particles compared to the native ones. Besides being milder and more straightforward to perform, the DMSA ligand exchange protocol produces MNP chemically more versatile for further functionalization possibilities. This versatility is shown through the covalent linkage of gum Arabic onto MNP-DMSA using carboxyl and thiol based chemical routes and yielding particles with comparable properties.

The heterogenization of the highly active monovacant polyoxotungstate ([PW11O39]7 −, abbreviated as PW11) was achieved by preparing the corresponding long chain quaternary ammonium salt (ODA7PW11, ODA = CH3(CH2)17(CH3)3N). The complete cation exchange confers total heterogeneity to the monovacant catalyst while keeping its oxidative catalytic activity. In fact, the heterogeneous catalyst allowed for the complete desulfurization of a multicomponent model diesel (2000 ppm S) after 40 min of reaction, conciliating extraction (using BMIMPF6 solvent) and oxidation (ECODS process using H2O2 oxidant). The heterogeneous catalyst has shown a superior desulfurization performance when compared with the homogeneous quaternary ammonium TBAPW11 catalyst (TBA = (C4H9)4 N). Both hybrid catalysts have been successfully reused in consecutive ECODS cycles. Additionally, the long carbon chain cations provide a protective environment around the polyoxometalate allowing for ODA7PW11 to retain its heterogeneity and structure after the ECODS process.

Magnetic core coatings modify the efficiency of nanoparticles used as contrast agents for MRI. In studies of these phenomena, care should be given to take into account possible effects of the specific micro-environment where coated nanoparticles are embedded. In the present work, the longitudinal and transverse relaxivities of superparamagnetic iron oxide nanoparticles stabilized with short-chain polyethylene glycol molecules (PEGylated SPIONs) were measured in a 7T magnetic field. PEGylated SPIONs with two different diameters (5 and 10nm) were studied. Two different PEGylated magnetoliposomes having liposome bilayer membranes composed of egg-phosphatidylcholine, cholesterol and 1,2-distearoyl-sn-glycerol-3-phosphoethanolamine-N-[methoxy PEG-2000] were also studied for their relaxivities, after being loaded with the PEGylated SPION of 5 or 10nm. This type of liposomes is known to have long residence time in bloodstream that leads to an attractive option for therapeutic applications. The influence of the magnetic core coating on the efficiency of the nanosystem as a negative contrast agent for MRI was then compared to the cumulative effect of the coating plus the specific micro-environment components. As a result, it was found that the PEGylated magnetoliposomes present a 4-fold higher efficiency as negative contrast agents for MRI than the PEGylated SPION.

Imidazolium-based ionic liquids (ILs) with different cation alkyl chain ([i-C5mim] or [C4mim]) and inorganic anions ([Cl−], [Tf2N−], [PF6−] and [DCA−]) were synthesized and immobilized in commercial mesoporous silica. The synthesized supported ILs (SILs) were characterized using NMR, FTIR, TGA, BET, SEM and TEM. CO2 sorption capacity, reusability and CO2/N2 selectivity were assessed by the pressure-decay technique. The effects of IL concentration, cation and anion chemical structure in CO2 sorption capacity and CO2/N2 separation performance were evaluated. Tests evidenced that the presence of branching on the cation alkyl side chain increases CO2/N2 selectivity. The immobilization of the IL [i-C5TPIm][Cl] on mesoporous silica in different concentrations (50, 20, 10 and 5 %) revealed that lower IL concentration results in higher CO2 sorption capacity. Immobilization of ILs containing fluorinated anions at low concentrations in the mesoporous silica support may promote the improvement of the CO2/N2 selectivity without interfering on CO2 sorption capacity of the original support. CO2 sorption capacity value shown by sample SIL-5 % - [i-C5TPIm][Tf2N] (79.50 ± 0.70 mg CO2  g-1) was close to the value obtained for the pristine mesoporous silica (81.70 ± 2.20 mg CO2 g-1) and the selectivity (4.30 ± 0.70) was more than twice of the one obtained for the support alone (2.32 ± 0.4). Recycle tests demonstrated that the ILs immobilized in mesoporous silica samples are stable, providing a new option to be used in CO2 capture processes.

The incorporation of europium polyoxometalates into silica nanoparticles can lead to a biocompatible nanomaterial with luminescent properties suitable for applications in biosensors, biological probes, and imaging. Keggin-type europium polyoxometalates Eu(PW11)x (x = 1 and 2) with different europium coordination environments were prepared by using simple methodologies and no expensive reactants. These luminescent compounds were then encapsulated into silica nanoparticles for the first time through the water-in-oil microemulsion methodology with a nonionic surfactant. The europium polyoxometalates and the nanoparticles were characterized by using several techniques [FTIR, FT-Raman, 31P magic angle spinning (MAS) NMR, and TEM/energy-dispersive X-ray spectroscopy (TEM-EDS), AFM, dynamic light scattering (DLS), and inductively coupled plasma MS (ICP-MS) analysis]. The stability of the material and the integrity of the europium compounds incorporated were also examined. Furthermore, the photoluminescence properties of the Eu(PW11)x@SiO2 nanomaterials were evaluated and compared with those of the free europium polyoxometalates. The silica surface of the most stable nanoparticles was successfully functionalized with appropriate organosilanes to enable the covalent binding of oligonucleotides.

The aim of the present study is to investigate the effect of the hydrolysis process on the properties of nanocrystalline cellulose (NCC) isolated from different precursors and the subsequent use of the extracted NCC for the reduction of graphene oxide (GO). The raw materials (almond and peanut shells) chosen for the isolation of cellulose were selected on the basis of their abundance and their poorly investigation in the production of NCC. Microcrystalline cellulose (MCC) was firstly extracted by alkali and bleaching treatments, then hydrolyzed under different processes to produce NCC polymorphs with structure I (NCC-I) and NCC structure II (NCC-II). The Fourier transform infrared spectroscopy, the X-ray diffraction (XRD) and the 13C NMR studies of the alkali and bleached products confirmed the formation of cellulose type I with high purity and good crystallinity, while scanning electron microscopy (SEM) showed micrometric fibers with lengths reaching 80 µm. Sulfuric acid treatment of these microfibers results in NCC type I or II, depending on the hydrolysis process. SEM of the NCC samples exhibited nanorods with diameter and aspect ratio in the range of 20–40 and 20–25 nm, respectively. Thermogravimetric analysis (TGA) of the MCC and NCC products indicated stable materials with a degradation temperature reaching 240 and 200 °C for MCC and NCC, respectively. The other part of our work concerns the use of the obtained cellulose nanocrystals (type II) for the preparation of reduced graphene oxide composite (NCC/RGO), to demonstrate the reducing properties of the isolated NCCII.