A study is presented of the molecular dynamics and of the viscosity in pure [Aliquat][Cl] ionic liquid and in a mixture of [Aliquat][Cl] with 1% (v/v) of [Aliquat][FeCl4]. The (1)H spin-lattice relaxation rate, R1, was measured by NMR relaxometry between 8 and 300 MHz. In addition, the translation self-diffusion, D, was measured by pulse field gradient NMR. The ILs' viscosity was measured as a function of an applied magnetic field, B, and it was found that the IL mixture's viscosity decreased with increasing B, whereas the [Aliquat][Cl] viscosity is independent of B. All experimental results were analyzed taking into account the viscosity's magnetic field dependence, assuming a modified Stokes-Einstein diffusion/viscosity relation. The main difference between the relaxation mechanisms responsible for R1 in the two IL systems is related to the additional paramagnetic relaxation contribution associated with the (1)H spins-[FeCl4] paramagnetic moments' interactions. Cross-relaxation cusps in the R1 dispersion, associated with (35)Cl and (1)H nuclear spins in the IL systems, were detected. The R1 model considered was successfully fitted to the experimental results, and it was possible to estimate the value of D at zero field in the case of the IL mixture which was consistent with the values of D measured at 7 and 14.1 T and with the magnetic field dependence estimated from the viscosity measurements. It was observed that a small concentration of [Aliquat][FeCl4] in the [Aliquat][Cl] was enough to produce a "superparamagnetic"-like effect and to change the IL mixture's molecular dynamics and viscosity and to allow for their control with an external magnetic field.

Pullulan, a neutral polysaccharide, was chemically modified in order to obtain two charged derivatives: reaction with SO3.DMF complex afforded a sulfate derivative (SP), while reaction with glycidyltrimethylammonium chloride gave a quaternary ammonium salt (AP). The presence of the charged groups was confirmed by FTIR. Assessment of the positions where the reaction took place was based on 1H- and 13C NMR (COSY, HSQC-TOCSY, HSQC-DEPT, and HMBC) experiments. Estimation of the degree of substitution (DS) was made from elemental analysis data, and further confirmed by NMR peak areas in the case of AP. These new derivatives showed the capability to condense with each other, forming nanoparticles with the ability to associate a model protein (BSA) and displaying adequate size for drug delivery applications, therefore making them good candidates for the production of pullulan-based nanocarriers by polyelectrolyte complexation.

Imidazolium-based ionic liquids (ILs) with different cation alkyl chain ([i-C5mim] or [C4mim]) and inorganic anions ([Cl−], [Tf2N−], [PF6−] and [DCA−]) were synthesized and immobilized in commercial mesoporous silica. The synthesized supported ILs (SILs) were characterized using NMR, FTIR, TGA, BET, SEM and TEM. CO2 sorption capacity, reusability and CO2/N2 selectivity were assessed by the pressure-decay technique. The effects of IL concentration, cation and anion chemical structure in CO2 sorption capacity and CO2/N2 separation performance were evaluated. Tests evidenced that the presence of branching on the cation alkyl side chain increases CO2/N2 selectivity. The immobilization of the IL [i-C5TPIm][Cl] on mesoporous silica in different concentrations (50, 20, 10 and 5 %) revealed that lower IL concentration results in higher CO2 sorption capacity. Immobilization of ILs containing fluorinated anions at low concentrations in the mesoporous silica support may promote the improvement of the CO2/N2 selectivity without interfering on CO2 sorption capacity of the original support. CO2 sorption capacity value shown by sample SIL-5 % - [i-C5TPIm][Tf2N] (79.50 ± 0.70 mg CO2  g-1) was close to the value obtained for the pristine mesoporous silica (81.70 ± 2.20 mg CO2 g-1) and the selectivity (4.30 ± 0.70) was more than twice of the one obtained for the support alone (2.32 ± 0.4). Recycle tests demonstrated that the ILs immobilized in mesoporous silica samples are stable, providing a new option to be used in CO2 capture processes.

Confined water in aqueous solutions of imidazolium-based ionic liquids (ILs) associated with acetate and imidazolate anions react reversibly with CO2 to yield bicarbonate. Three types of CO2 sorption in these “IL aqueous solutions” were observed: physical, CO2-imidazolium adduct generation, and bicarbonate formation (up to 1.9 molbicarbonate mol−1 of IL), resulting in a 10:1 (molar ratio) total absorption of CO2 relative to imidazolate anions in the presence of water 1:1000 (IL/water). These sorption values are higher than the classical alkanol amines or even alkaline aqueous solutions under similar experimental conditions.