Adenylate kinases (AK) from Gram-negative bacteria are generally devoid of metal ions in their LID domain. However, three metal ions, zinc, cobalt, and iron, have been found in AK from Gram-negative bacteria. Crystal structures of substrate-free AK from Desulfovibrio gigas with three different metal ions (Zn(2+), Zn-AK; Co(2+), Co-AK; and Fe(2+), Fe-AK) bound in its LID domain have been determined by X-ray crystallography to resolutions 1.8, 2.0, and 3.0 A, respectively. The zinc and iron forms of the enzyme were crystallized in space group I222, whereas the cobalt-form crystals were C2. The presence of the metals was confirmed by calculation of anomalous difference maps and by X-ray fluorescence scans. The work presented here is the first report of a structure of a metal-containing AK from a Gram-negative bacterium. The native enzyme was crystallized, and only zinc was detected in the LID domain. Co-AK and Fe-AK were obtained by overexpressing the protein in Escherichia coli. Zn-AK and Fe-AK crystallized as monomers in the asymmetric unit, whereas Co-AK crystallized as a dimer. Nevertheless, all three crystal structures are very similar to each other, with the same LID domain topology, the only change being the presence of the different metal atoms. In the absence of any substrate, the LID domain of all holoforms of AK was present in a fully open conformational state. Normal mode analysis was performed to predict fluctuations of the LID domain along the catalytic pathway.

High-molecular-weight cytochromes (Hmcs) belong to a large family of multihaem cytochromes in sulfate-reducing bacteria. HmcA is the first cytochrome reported to have 16 c-type haems arranged in its polypeptide chain. The function of this cytochrome is still unknown, although it is clear that it belongs to a membrane-bound complex involved in electron transfer from the periplasm to the membrane. HmcA from Desulfovibrio gigas has been purified and successfully crystallized using the hanging-drop vapour-diffusion method. The crystals grew using PEG and zinc acetate as precipitants to maximum dimensions of 0.2 x 0.2 x 0.2 mm in an orthorhombic space group, with unit-cell parameters a = 88.9, b = 90.9, c = 83.7 Angstrom. The crystals diffracted to beyond 2.07 Angstrom and a MAD data set was collected.

This work reports on the direct electrochemistry of the Desulfovibrio gigas aldehyde oxidoreductase (DgAOR), a molybdenum enzyme of the xanthine oxidase family that contains three redox-active cofactors: two [2Fe-2S] centers and a molybdopterin cytosine dinucleotide cofactor. The voltammetric behavior of the enzyme was analyzed at gold and carbon (pyrolytic graphite and glassy carbon) electrodes. Two different strategies were used: one with the molecules confined to the electrode surface and a second with DgAOR in solution. In all of the cases studied, electron transfer took place, although different redox reactions were responsible for the voltammetric signal. From a thorough analysis of the voltammetric responses and the structural properties of the molecular surface of DgAOR, the redox reaction at the carbon electrodes could be assigned to the reduction of the more exposed iron cluster, [2Fe-2S] II, whereas reduction of the molybdopterin cofactor occurs at the gold electrode. Voltammetric results in the presence of aldehydes are also reported and discussed.

In this paper we propose the construction of a new non-mediated electrochemical biosensor for nitrite determination in complex samples. The device is based on the stable and selective cytochrome c nitrite reductase (ccNiR) from Desulfovibrio desulfuricans, which has both high turnover and heterogeneous electron transfer rates. In opposition to previous efforts making use of several redox mediators, in this work we exploited the capacity of ccNiR to display a direct electrochemical response when interacting with pyrolytic graphite (PG) surfaces. To enable the analytical application of such bioelectrode the protein was successfully incorporated within a porous silica glass made by the sol-gel process. In the presence of nitrite, the ccNiR/sol-gel/PG electrode promptly displays catalytic currents indicating that the entrapped ccNiR molecules are reduced via direct electron transfer. This result is noteworthy since the protein molecules are caged inside a non-conductive silica network, in the absence of any mediator species or electron relay. At optimal conditions, the minimum detectable concentration is 120 nM. The biosensor sensitivity is 430 mA M(-1) cm(-2) within a linear range of 0.25-50 microM, keeping a stable response up to two weeks. The analysis of nitrites in freshwaters using the method of standard addition was highly accurated.

A c-type hexaheme nitrite reductase (NiR) isolated from nitrate-grown cells of Desulfovibrio desulfuricans (Dd) ATCC 27774 catalyses the six-electron reduction of nitrite to ammonia. Previous electrochemical studies demonstrated that a simple electrocatalytic mechanism can be applied to this system (Moreno, C., Costa, C., Moura, I., LeGall, J., Liu, M. Y., Payne, W. J., Van Dijk, C. and Moura, J. J. G. (1992) Eur.J.Biochem. 212, 79-86). Its substrate specificity, availability and stability under ambient conditions makes this enzymatic system a promising candidate for use in a biosensor device. An electrochemical study of gel-immobilized Dd NiR on a glassy carbon electrode revealed both enzymatic activity and amperometric response to nitrite. In this study it was observed that the catalytic current density is a function of the nitrite concentration in solution and follows a characteristic Michaelis-Menten-type substrate dependence. Such a biosensor device (NiR-electrode) bears the option to be used for analytical determination of nitrite in complex media.

Membrane electrodes (ME) were constructed using gold, glassy carbon and pyrolytic graphite supports and a dialysis membrane, and used to study the electrochemical behavior of small size electron transfer proteins: monohemic cytochrome c(522) from Pseudomonas nautica and cytochrome c(533) as well as rubredoxin from Desulfovibrio vulgaris. Different electrochemical techniques were used including cyclic voltammetry (CV), square wave voltammetry (SW) and differential pulse voltammetry (DP). A direct electrochemical response was obtained in all cases except with rubredoxin where a facilitator was added to the protein solution entrapped between the membrane and the electrode surface. Formal potentials and heterogeneous charge transfer rate constants were determined from the voltammetric data. The influence of the ionic strength and the pH of the medium on the electrochemical response at the ME were analyzed. The benefits from the use of the ME in protein electrochemistry and its role in modulating the redox behavior are analyzed. A critical comparison is presented with data obtained at non-MEs. Finally, the interactions that must be established between the proteins and the electrode surfaces are discussed, thereby modeling molecular interactions that occur in biological systems. (C) 2002 Elsevier Science B.V. All rights reserved.

A hypothetical model of the complex formed between the iron-sulfur protein rubredoxin and the tetraheme cytochrome c3 from the sulfate-reducing bacteria Desulfovibrio vulgaris (Hildenborough) has been proposed utilizing computer graphic modeling, computational methods and NMR spectroscopy. The proposed complex appears feasible on the basis of complementary electrostatic interaction and steric factors and is consistent with the data from NMR experiments. In this model, the non-heme iron atom of rubredoxin is in close proximity to heme 1 of cytochrome c3. The complex is stabilized by charge-pair interactions and hydrogen bonds. This complex is compared to the flavodoxin-cytochrome c3 complex previously proposed [Stewart, D. E., LeGall, J., Moura, I., Moura, J. J. G., Peck, H. D. Jr, Xavier, A. V., Weiner, P. K. & Wampler, J. E. (1988) Biochemistry 27, 2444-2450] and new NMR data shows that both proteins interact with the same heme group of the cytochrome as postulated.

Spectroscopy coupled with density functional calculations has been used to define the spin state, oxidation states, spin distribution, and ground state wave function of the mu4-sulfide bridged tetranuclear CuZ cluster of nitrous oxide reductase. Initial insight into the electronic contribution to N2O reduction is developed, which involves a sigma superexchange pathway through the bridging sulfide.

Single-walled carbon nanotubes (SWCNTs) deposits on glassy carbon and pyrolytic graphite electrodes have dramatically enhanced the direct electron transfer of the multihemic nitrite reductase from Desulfovibrio desulfuricans ATCC 27774, enabling a 10-fold increase in catalytic currents. At optimal conditions, the sensitivity to nitrite and the maximum current density were 2.4 +/- 0.1 A L mol(-1) cm(-2) and 1500 mu A cm(-2), respectively. Since the biosensor performance decreased over time, laponite clay and electropolymerized amphiphilic pyrrole were tested as protecting layers. Both coating materials increased substantially the bioelectrode stability, which kept about 90% and 60% of its initial sensitivity to nitrite after 20 and 248 days, respectively.

Enoate reductase (EC 1.3.1.31) is a protein isolated from Clostridium tyrobutyricum that contains iron, labile sulfide, FAD, and FMN. The enzyme reduces the alpha,beta carbon-carbon double bond of nonactivated 2-enoates and in a reversible way that of 2-enals at the expense of NADH or reduced methyl viologen. UV-visible and EPR potentiometric titrations detect a semiquinone species in redox intermediate states characterized by an isotropic EPR signal at g = 2.0 without contribution at 580 nm. EPR redox titration shows two widely spread mid-point redox potentials (-190 and -350 mV at pH 7. 0), and a nearly stoichiometric amount of this species is detected. The data suggest the semiquinone radical has an anionic nature. In the reduced form, the [Fe-S] moiety is characterized by a single rhombic EPR spectrum, observed in a wide range of temperatures (4. 2-60 K) with g values at 2.013, 1.943, and 1.860 (-180 mV at pH 7.0). The gmax value is low when compared with what has been reported for other iron-sulfur clusters. Mossbauer studies reveal the presence of a [4Fe-4S]+2/+1 center. One of the subcomponents of the spectrum shows an unusually large value of quadrupole splitting (ferrous character) in both the oxidized and reduced states. Substrate binding to the reduced enzyme induces subtle changes in the spectroscopic Mossbauer parameters. The Mossbauer data together with known kinetic information suggest the involvement of this iron-sulfur center in the enzyme mechanism.

Iron-sulfur clusters with [3Fe-4S] cores are widely distributed in biological systems. In the oxidized state, designated [3Fe-4S](+), these electron-transfer agents have an electronic ground state with S = 1/2, and; they exhibit EPR signals centered at g = 2.01. It has been established by Mossbauer spectroscopy that the three iron sites of the cluster are high-spin Fe3+; and the general properties of the S = 1/2 ground state have been described with the exchange Hamiltonian H-exch = J(12)S(1).S-2 + J(23)S(2).S-3 + J(13)S(1).S-3 Some [3Fe-4S](+) clusters (type 1) have their g-values confined to the range between g = 2.03 and 2.00 while others (type 2) exhibit a continuous distribution of g-values down to g approximate to 1.85. Despite considerable efforts in various laboratories no model has emerged that explains the g-values of type 2 clusters. The 4.2 K spectra of all [3Fe-4S](+) clusters have broad features,which have been simulated in the past by using Fe-57 magnetic hyperfine tensors with anisotropies that are unusually large for high-spin feme sites. It is proposed here that antisymmetric exchange, H-AS = d.(S-1 x S-2 + S-2 x S-3 + S-3 x S-1), is the cause of the g-value shifts in type 2 clusters. We have been able to fit the EPR and Mossbauer spectra of the 3Fe clusters of beef heart aconitase and Desulfovibrio gigas ferredoxin II by using antisymmetric exchange in combination with distributed exchange coupling constants J(12), J(13), and J(23) (J-strain). While antisymmetric exchange is negligible for aconitase (which has a type 1 cluster), fits of the ferredoxin II spectra require \d\ approximate to 0.4 cm(-1). Our studies show that the data of both proteins can lie fit using the same isotropic Fe-57 magnetic hyperfine coupling constant for th three cluster sites, namely a -18.0 MHz for aconitase and a = -18.5 MHz for the D. gigas ferredoxin. The effects of antisymmetric exchange and J-strain on the Mossbauer and EPR spectra are discussed.

Ni and Se x-ray absorption spectroscopic studies of the [NiFeSe]hydrogenases from Desulfovibrio baculatus are described. The Ni site geometry is pseudo-octahedral with a coordinating ligand composition of 3-4 (N,O) at 2.06 A, 1-2 (S,Cl) at 2.17 A, and 1 Se at 2.44 A. The Se coordination environment consists of 1 C at 2.0 A and a heavy scatterer M (M = Ni or Fe) at approximately 2.4 A. These results are interpreted in terms of a selenocysteine residue coordinated to the Ni site. The possible role of the Ni-Se site in the catalytic activation of H2 is discussed.

Methanosarcina barkeri ferredoxin was purified and characterized by electron paramagnetic resonance (EPR) and Mossbauer spectroscopy. The purification procedure included chromatographic steps on DEAE-cellulose and gel filtration. The isolated protein is unstable under aerobic conditions. The ferredoxin exhibits charge transfer bands at 283 nm and 405 nm with an absorption ratio A405/A283 = 0.73. Its molecular weight has been estimated to be 20000-22000 by gel filtration chromatography. The native ferredoxin exhibits an intense EPR signal at g = 2.02 and only a very weak g = 1.94 signal develops upon reduction with dithionite. The Mossbauer spectra of the reduced protein are characteristic of a [3Fe-3S] center. The combined EPR and Mossbauer studies show that M. barkeri ferredoxin contains only [3Fe-3S] clusters, similar to Azotobacter vinelandii Fd[Emptage, M.H., Kent, T.A., Huynh, B.H., Rawlings, J., Orme-Johnson, W.H. & Munck, M. (1980) J. Biol. Chem. 255, 1793-1796], Desulfovibrio gigas FdII [Huynh, B.H., Moura, J.J.G., Moura, I., Kent, T.A., LeGall, J., Xavier, A.V. & Munck, E. (1980) J. Biol. Chem. 255, 3242-3244] and mitochondrial beef heart aconitase [Kent, T.A., Dreyer, J.-L., Kennedy, M.C., Huynh, B.H., Emptage, M.H., Beinert, H. & Munck, E. (1982) Proc. Natl Acad. Sci. USA, 79, 1096-1100].