POXylated polyurea dendrimer nanoparticles (PUREG4OOx48) are loaded with sildenafil (SDF) by a supercritical carbon dioxide–assisted (scCO2) impregnation. Further supercritical CO2-assisted spray drying (SASD) leads to hybrid nano-in-micro dry powder formulations that are investigated aiming at efficient pulmonary delivery of SDF in pulmonary arterial hypertension treatment. This is the first report of the production of poly(D,L-lactide-co-glycolide)-cholesterol (PLGA-Chol) microparticles processed by SASD. The optimized formulation of nano-in-microparticles is composed of PLGA, Chol, and PUREG4OOx48, loaded with SDF solutions in a 77:23 ratio (PLGA-Chol:dendrimer, w/w). The dry powders are fully characterized and found to be highly biodegradable and biocompatible, and the SDF release profile evaluates under different pH values. The median mass average diameter (MMAD) of the nano-in-micro systems varies between 2.57 and 5 µm and the fine particle fraction (FPF) between 36% and 29% for PUREG4OMeOx48[PLGA-Chol] and PUREG4OEtOx48[PLGA-Chol], respectively. The data validate the potential use of these new formulations in inhalation therapy. In vitro studies are also carried out in order to evaluate the effect of the free drug in cell viability and formulations cytotoxicity.

CO-releasing molecules (CORMs) have been widely studied for their anti-inflammatory, antiapoptotic, and antiproliferative effects. CORM-3 is a water-soluble Ru-based metal carbonyl complex, which metallates serum proteins and readily releases CO in biological media. In this work, we evaluated the anti-inflammatory and wound-healing effects of gold nanoparticles-CORM-3 conjugates, AuNPs@PEG@BSA·Ru(CO)x, exploring its use as an efficient CO carrier. Our results suggest that the nanoformulation was capable of inducing a more pronounced cell effect, at the anti-inflammatory level and a faster tissue repair, probably derived from a rapid cell uptake of the nanoformulation that results in the increase of CO inside the cell.

A missense mutant of a Dps protein (DNA-binding protein from starved cells) from Marinobacter hydrocarbonoclasticus was used as a building block to develop a new supramolecular assembly complex which enhances the iron uptake, a physiological function of this mini-ferritin. The missense mutation was conducted in an exposed and flexible region of the N-terminal, wherein a threonine residue in position 10 was replaced by a cysteine residue (DpsT10C). This step enabled a click chemistry approach to the variant DpsT10C, where a thiol-ene coupling occurs. Two methods and two types of linker were used resulting in two different mini-ferritin supramolecular polymers, which have maintained secondary structure and native iron uptake physiological function. Electrophoretic assays and mass spectrometry were utilized to confirm that both functionalization and coupling reactions occured as predicted. The secondary structure has been investigated by circular dichroism and synchrotron radiation circular dichroism. Size and morphology were obtained by dynamic light scattering, size exclusion chromatography and atomic force microscopy, respectively. The iron uptake of the synthesized protein polymers was confirmed by UV-Vis spectroscopy loading assays.

Oil spills on ocean waters represent a major threat to marine ecosystems. A significant part of the spilled oil is dispersed in microdroplets that are not recovered by traditional oil-removing methods. In this work, we report on the manufacture of cellulose acetate (CA) electrospun non-woven membranes, stamped with different cellulose nanocrystal (CNC) patterns. We demonstrate the use of the membranes produced as selective oil microdroplets removal from water emulsions with an efficiency up to 80%. Screenprinting was used to imprint different CNC designs on the CA surface membranes. To promote the adhesion between the CNCs and the CNCs with the CA fibers the membrane was subjected to a thermal and chemical treatments. Oil droplets were collected under water in the oleophilic CNC pattern while the water could flow through the hydrophilic CA electrospun non-woven membrane.

The mechanism of oxidation of N-heterocycle phthalazine to phthalazin-1(2H)-one and its associated free energy profile, catalyzed by human aldehyde oxidase (hAOX1), was studied in atomistic detail using QM/MM methodologies. The studied reaction was found to involve three sequential steps: (i) protonation of the substrate’s N2 atom by Lys893, (ii) nucleophilic attack of the hydroxyl group of the molybdenum cofactor (Moco) to the substrate, and (iii) hydride transfer from the substrate to the sulfur atom of the Moco. The free energy profile that was calculated revealed that the rate-limiting step corresponds to hydride transfer. It was also found that Lys893 plays a relevant role in the reaction, being important not only for the anchorage of the substrate close to the Moco, but also in the catalytic reaction. The variations of the oxidation state of the molybdenum ion throughout the catalytic cycle were examined too. We found out that during the displacement of the products away from the Moco, the transfer of electrons from the catalytic site to the FAD site was proton-coupled. As a consequence, the most favorable and fastest pathway for the enzyme to complete its catalytic cycle was that with MoV and a deprotonated SH ligand of the Moco with the FAD molecule converted to its semiquinone form, FADH•.The mechanism of oxidation of N-heterocycle phthalazine to phthalazin-1(2H)-one and its associated free energy profile, catalyzed by human aldehyde oxidase (hAOX1), was studied in atomistic detail using QM/MM methodologies. The studied reaction was found to involve three sequential steps: (i) protonation of the substrate’s N2 atom by Lys893, (ii) nucleophilic attack of the hydroxyl group of the molybdenum cofactor (Moco) to the substrate, and (iii) hydride transfer from the substrate to the sulfur atom of the Moco. The free energy profile that was calculated revealed that the rate-limiting step corresponds to hydride transfer. It was also found that Lys893 plays a relevant role in the reaction, being important not only for the anchorage of the substrate close to the Moco, but also in the catalytic reaction. The variations of the oxidation state of the molybdenum ion throughout the catalytic cycle were examined too. We found out that during the displacement of the products away from the Moco, the transfer of electrons from the catalytic site to the FAD site was proton-coupled. As a consequence, the most favorable and fastest pathway for the enzyme to complete its catalytic cycle was that with MoV and a deprotonated SH ligand of the Moco with the FAD molecule converted to its semiquinone form, FADH•.

In this work, we developed and investigated a random laser based on rhodamine6G (Rh6G) in ethylene glycol (EG) solution with varying cellulose nanocrystalline (CNC) needles as scatterers in the lasing media. Besides the suspension-in-cuvette scheme, an alternative configuration was also employed: a dye-CNC flexible self-supported thick-film (70 µm) random laser made by drop casting of the ${\rm CNCs}+{\rm Rh6G}+{\rm hydroxypropyl}$CNCs+Rh6G+hydroxypropyl cellulose suspension. In relation to conventional scatterers, the biodegradable cellulose nanocompounds showed a comparable reduction in both the spectral full width at half-maximum and the energy threshold values, with an optimal concentration of 5 mg [CNC]/ml[EG] in suspension. Its performance was also compared with other cellulose-based random lasers, presenting advantages for some parameters. The flexible film configuration showed similar results, but contained 10% less Rh6G than the suspension.

Nucleotide-processing enzymes are key players in biological processes. They often operate through high substrate specificity for catalysis. How such specificity is achieved is unclear. Here, we dealt with this question by investigating all-α dimeric deoxyuridine triphosphate nucleotidohydrolases (dUTPases). Typically, these dUTPases hydrolyze either dUTP or deoxyuridine diphosphate (dUDP) substrates. However, the dUTPase enzyme DR2231 from Deinococcus radiodurans selectively hydrolyzes dUTP only, and not dUDP. By means of extended classical molecular dynamics simulations and quantum chemical calculations, we show that DR2231 achieves this specificity for dUTP via second-shell basic residues that, together with the two catalytic magnesium ions, contribute to properly orienting the γ-phosphate of dUTP in a prereactive state. This allows a nucleophilic water to be correctly placed and activated in order to perform substrate hydrolysis. We show that this enzymatic mechanism is not viable when dUDP is bound to DR2231. Importantly, in several other dUTPases capable of hydrolyzing either dUTP or dUDP, we detected that active site second-shell basic residues are more in number, anchoring the β-phosphate of the nucleotide substrate too, in contrast to what is observed in DR2231. Thus, strategically located basic second-shell residues mediate precise reactant positioning at the catalytic site, determining substrate specificity in dUTPases and possibly in other structurally similar nucleotide-processing metalloenzymes.Nucleotide-processing enzymes are key players in biological processes. They often operate through high substrate specificity for catalysis. How such specificity is achieved is unclear. Here, we dealt with this question by investigating all-α dimeric deoxyuridine triphosphate nucleotidohydrolases (dUTPases). Typically, these dUTPases hydrolyze either dUTP or deoxyuridine diphosphate (dUDP) substrates. However, the dUTPase enzyme DR2231 from Deinococcus radiodurans selectively hydrolyzes dUTP only, and not dUDP. By means of extended classical molecular dynamics simulations and quantum chemical calculations, we show that DR2231 achieves this specificity for dUTP via second-shell basic residues that, together with the two catalytic magnesium ions, contribute to properly orienting the γ-phosphate of dUTP in a prereactive state. This allows a nucleophilic water to be correctly placed and activated in order to perform substrate hydrolysis. We show that this enzymatic mechanism is not viable when dUDP is bound to DR2231. Importantly, in several other dUTPases capable of hydrolyzing either dUTP or dUDP, we detected that active site second-shell basic residues are more in number, anchoring the β-phosphate of the nucleotide substrate too, in contrast to what is observed in DR2231. Thus, strategically located basic second-shell residues mediate precise reactant positioning at the catalytic site, determining substrate specificity in dUTPases and possibly in other structurally similar nucleotide-processing metalloenzymes.

This is the first comprehensive study demonstrating the antiproliferative effect of vanadium complexes bearing 8-hydroxyquinoline (quinH) ligands, including the parent and -CH3 (Me), -NO2, -Cl and -I substituted ligands, on HCT116 and A2780 cancer cell lines. To determine the structure-cytotoxicity relationships seven six-coordinate oxovanadium(v) complexes [VO(OMe)(5,7-(Me)2-quin)2] (1), [VO(OMe)(5,7-Cl2-quin)2] (2), [VO(OMe)(5,7-Cl,I-quin)2] (3), [VO(OMe)(5,7-I2-quin)2] (4), [VO(OMe)(5-NO2-quin)2] (5), [VO(OMe)(5-Cl-quin)2] (6), and [VO(OMe)(quin)2] (7) were investigated. The cytotoxicity of 8-hydroxyquinoline oxovanadium(v) complexes is higher in the A2780 cell line (lower IC50) than that observed for the widely used chemotherapeutic agent, cisplatin, while displaying low cytotoxicity for normal human primary fibroblasts. Substituents introduced into the 8-hydroxyquinoline backbone reduced the antiproliferative effect of the vanadium complexes, and the complexes with the ligand substituted only in the 5 position (5 and 6) were more cytotoxic than those with substituents in the 5,7 positions of the quin backbone (1-4). Depending on the substituent type, the cytotoxicity of 1-4 followed the trend: -Cl > -CH3 > -I. Incubation of A2780 cancer cells with IC50 concentrations of complexes 5, 6 and 7 promoted cellular detachment, possibly through membrane destabilization, and triggered apoptosis and necrosis. ROS production might be responsible for the cell death mechanism observed particularly in the A2780 cells exposed to complexes 5 and 6.

Magnetic hyperthermia is a cancer treatment based on the exposure of magnetic nanoparticles to an alternating magnetic field in order to generate local heat. In this work, 3D cell culture models were prepared to observe the effect that a different number of internalized particles had on the mechanisms of cell death triggered upon the magnetic hyperthermia treatment. Macrophages were selected by their high capacity to uptake nanoparticles. Intracellular nanoparticle concentrations up to 7.5 pg Fe/cell were measured both by elemental analysis and magnetic characterization techniques. Cell viability after the magnetic hyperthermia treatment was decreased to <25% for intracellular iron contents above 1 pg per cell. Theoretical calculations of the intracellular thermal effects that occurred during the alternating magnetic field application indicated a very low increase in the global cell temperature. Different apoptotic routes were triggered depending on the number of internalized particles. At low intracellular magnetic nanoparticle amounts (below 1 pg Fe/cell), the intrinsic route was the main mechanism to induce apoptosis, as observed by the high Bax/Bcl-2 mRNA ratio and low caspase-8 activity. In contrast, at higher concentrations of internalized magnetic nanoparticles (1-7.5 pg Fe/cell), the extrinsic route was observed through the increased activity of caspase-8. Nevertheless, both mechanisms may coexist at intermediate iron concentrations. Knowledge on the different mechanisms of cell death triggered after the magnetic hyperthermia treatment is fundamental to understand the biological events activated by this procedure and their role in its effectiveness.

One of the trends in downstream processing comprises the use of ?anything-but-chromatography? methods to overcome the current downfalls of standard packed-bed chromatography. Precipitation and magnetic separation are two techniques already proven to accomplish protein purification from complex media, yet never used in synergy. With the aim to capture antibodies directly from crude extracts, a new approach combining precipitation and magnetic separation was developed and named as affinity magnetic precipitation. A precipitation screening, based on the Hofmeister series, and a commercial precipitation kit were tested with affinity magnetic particles to assess the best condition for antibody capture from human serum plasma and clarified cell supernatant. The best conditions were obtained when using PEG3350 as precipitant at 4°C for 1h, reaching 80% purity and 50% recovery of polyclonal antibodies from plasma, and 99% purity with 97% recovery yield of anti-TNFα mAb from cell supernatants. These results show that the synergetic use of precipitation and magnetic separation can represent an alternative for the efficient capture of antibodies. This article is protected by copyright. All rights reserved

ATP-binding cassette (ABC) type I importers are widespread in bacteria and play a crucial role in its survival and pathogenesis. They share the same modular architecture comprising two intracellular nucleotide-binding domains (NBDs), two transmembrane domains (TMDs) and a substrate-binding protein. The NBDs bind and hydrolyze ATP, thereby generating conformational changes that are coupled to the TMDs and lead to substrate translocation. A group of multitask NBDs that are able to serve as the cellular motor for multiple sugar importers was recently discovered. To understand why some ABC importers share energy-coupling components, we used the MsmX ATPase from Bacillus subtilis as a model for biological and structural studies. Here we report the first examples of functional hybrid interspecies ABC type I importers in which the NBDs could be exchanged. Furthermore, the first crystal structure of an assigned multitask NBD provides a framework to understand the molecular basis of the broader specificity of interaction with the TMDs.

Abstract POXylated polyurea dendrimer nanoparticles (PUREG4OOx48) are loaded with sildenafil (SDF) by a supercritical carbon dioxide–assisted (scCO2) impregnation. Further supercritical CO2-assisted spray drying (SASD) leads to hybrid nano-in-micro dry powder formulations that are investigated aiming at efficient pulmonary delivery of SDF in pulmonary arterial hypertension treatment. This is the first report of the production of poly(D,L-lactide-co-glycolide)-cholesterol (PLGA-Chol) microparticles processed by SASD. The optimized formulation of nano-in-microparticles is composed of PLGA, Chol, and PUREG4OOx48, loaded with SDF solutions in a 77:23 ratio (PLGA-Chol:dendrimer, w/w). The dry powders are fully characterized and found to be highly biodegradable and biocompatible, and the SDF release profile evaluates under different pH values. The median mass average diameter (MMAD) of the nano-in-micro systems varies between 2.57 and 5 µm and the fine particle fraction (FPF) between 36% and 29% for PUREG4OMeOx48[PLGA-Chol] and PUREG4OEtOx48[PLGA-Chol], respectively. The data validate the potential use of these new formulations in inhalation therapy. In vitro studies are also carried out in order to evaluate the effect of the free drug in cell viability and formulations cytotoxicity.

Cellulose nano crystals (CNCs) are promising materials for energy efficient buildings related to the control of reflectivity and heat absorption/reflection of light. In this sense it is important to improve CNCs films fire retardant properties, which can be achieved by adding clays. Cellulose nanocrystals (CNCs) and nanolayers obtained from Sodium Fluorohectorite (NaFh) synthetic clay are both known to form liquid crystalline phases in aqueous suspensions. CNCs form cholesteric phases, which structure is preserved after water evaporation, while dry NaFh nanolayers aligned films collapse. In this initial work, it is shown that CNCs are compatible with NaFh clay. We demonstrate that the liquid crystalline phase of CNCs in water is not destroyed by the presence of NaFh nanolayers. The NaFh nanolayers act as planar anchoring surfaces to the cellulose nanorods and, after evaporation of the water coloured films are obtained. The precursor solutions and the photonic films were investigated by Describe several techniques.

Structural vivid colours can arise from the interference of light reflected from structures exhibiting periodicity on scales in the range of visible wavelengths. This effect is observed with light reflected from cell-walls of some plants and exoskeletons of certain insects. Sometimes the colour sequence observed for these structures consists of nearly circular concentric rings that vary in colour from Red, Orange, Yellow, Green, Cyan to Blue, from the periphery to the centre, similarly to the colour scheme sequence observed for the rainbow (ROYGB). The sequence of colours has been found for solid films obtained from droplets of aqueous cellulose nanocrystals (CNCs) suspensions and attributed to a “coffee ring” effect. In this work, coloured lyotropic solutions and solid films obtained from a cellulose derivative in the presence of trifluoroacetic acid (TFA), which acts as a “reactive solvent”, are revisited. The systems were investigated with spectroscopy, using circularly and linearly polarised light, coupled with a polarised optical microscope (POM) and scanning electron microscopy (SEM). The lyotropic cholesteric liquid crystalline solutions were confined in capillaries to simplify 1D molecular diffusion along the capillary where an unexpected sequence of the structural colours was observed. The development and reappearance of the sequence of vivid colours seem consistent with the reaction–diffusion of the “reactive solvent” in the presence of the cellulosic chains. The strong TFA acts as an auto-catalyst for the chemical reaction between TFA and the hydroxyl groups, existing along the cellulosic chain, and diffuses to the top and bottom along the capillaries, carrying dissolved cellulosic chains. Uncovering the precise mechanism of colour sequence and evolution over time in cellulosic lyotropic solutions has important implications for future optical/sensors applications and for the understanding of the development of cellulose-based structures in nature.

BackgroundHalf of human cancers harbour TP53 mutations that render p53 inactive as a tumor suppressor. As such, reactivation of mutant (mut)p53 through restoration of wild-type (wt)-like function represents one of the most promising therapeutic strategies in cancer treatment. Recently, we have reported the (S)-tryptophanol-derived oxazoloisoindolinone SLMP53-1 as a new reactivator of wt and mutp53 R280K with in vitro and in vivo p53-dependent antitumor activity. The present work aimed a mechanistic elucidation of mutp53 reactivation by SLMP53-1.
Methods and results
By cellular thermal shift assay (CETSA), it is shown that SLMP53-1 induces wt and mutp53 R280K thermal stabilization, which is indicative of intermolecular interactions with these proteins. Accordingly, in silico studies of wt and mutp53 R280K DNA-binding domain with SLMP53-1 unveiled that the compound binds at the interface of the p53 homodimer with the DNA minor groove. Additionally, using yeast and p53-null tumor cells ectopically expressing distinct highly prevalent mutp53, the ability of SLMP53-1 to reactivate multiple mutp53 is evidenced.
Conclusions
SLMP53-1 is a p53-activating agent with the ability to directly target wt and a set of hotspot mutp53.
General Significance
This work reinforces the encouraging application of SLMP53-1 in the personalized treatment of cancer patients harboring distinct p53 status.

Advanced functionalities textiles embedding electronic fibers, yarns and fabrics are a demand for innovative smart cloths. Conductive electrospun membranes and yarns based on polyaniline/polyvinylpyrrolidone (PANI/PVP) were investigated using the chemical modification of PANI instead of using conventional coating processes as in-situ polymerization. PANI was synthesized from the aniline monomer and the influence of the oxidant-to-monomer ratio on electrical conductivity was studied. The optimized conductivity of pellets made with pressed PANI powders was 21 S·cm−1. Yarns were then prepared from the t-Boc-PANI/PVP electrospun membranes followed by PANI protonation to enhance their electrical properties. Using this methodology, electrospun membranes and yarns were produced with electrical conductivities of 1.7 × 10−2 and 4.1 × 10−4 S·cm−1.

Lopinavir (LPV) is currently used in combination with ritonavir for the clinical management of HIV infections due to its limited oral bioavailability. Herein, we report the application of an in silico method to study cyclodextrin (CyD) host-guest molecular interaction with LPV for the rational selection of the best CyD for developing a CyD based LPV delivery system. The predicted CyD, a (2-hydroxy)propyl-gamma derivative with high degree of substitution (HP17-γ-CyD) was synthesized and comparatively evaluated with γ-CyD and the commercially available HP-γ-CyD. All complexes were prepared by supercritical assisted spray drying (SASD) and co-evaporation (CoEva) at molar ratios (1:1 and 1:2); and afterwards fully characterized. Results indicate a higher LPV amorphization and solubilization ability of HP17-γ-CyD. The SASD processing technology also enhanced LPV solubilization and release from complexes. The application of in silico methodologies is a feasible approach for the rational and/or deductive development of CyD drug delivery systems.

CO2 separation from natural gas is considered to be a crucial strategy to mitigate global warming problems, meet product specification, pipeline specs and other application specific requirements. Silica xerogels (SX) are considered to be potential materials for CO2 capture due to their high specific surface area. Thus, a series of silica xerogels functionalized with imidazolium, phosphonium, ammonium and pyridinium-based room-temperature ionic liquids (RTILs) were synthesized. The synthesized silica xerogels were characterized by NMR, helium pycnometry, DTA-TG, BET, SEM and TEM. CO2 sorption, reusability and CO2/CH4 selectivity were assessed by the pressure-decay technique. Silica xerogels containing IL demonstrated advantages compared to RTILs used as separation solvents in CO2 capture processes including higher CO2 sorption capacity and faster sorption/desorption. Using fluorinated anion for functionalization of silica xerogels leads to a higher affinity for CO2 over CH4. The best performance was obtained by SX- [bmim] [TF2N] (223.4 mg CO2/g mg/g at 298.15 K and 20 bar). Moreover, SX- [bmim] [TF2N] showed higher CO2 sorption capacity as compared to other reported sorbents. CO2 sorption and CO2/CH4 selectivity results were submitted to an analysis of variance and the means compared using Tukey's test (5%).

Imidazolium-based ionic liquids (ILs) with different cation alkyl chain ([i-C5mim] or [C4mim]) and inorganic anions ([Cl−], [Tf2N−], [PF6−] and [DCA−]) were synthesized and immobilized in commercial mesoporous silica. The synthesized supported ILs (SILs) were characterized using NMR, FTIR, TGA, BET, SEM and TEM. CO2 sorption capacity, reusability and CO2/N2 selectivity were assessed by the pressure-decay technique. The effects of IL concentration, cation and anion chemical structure in CO2 sorption capacity and CO2/N2 separation performance were evaluated. Tests evidenced that the presence of branching on the cation alkyl side chain increases CO2/N2 selectivity. The immobilization of the IL [i-C5TPIm][Cl] on mesoporous silica in different concentrations (50, 20, 10 and 5 %) revealed that lower IL concentration results in higher CO2 sorption capacity. Immobilization of ILs containing fluorinated anions at low concentrations in the mesoporous silica support may promote the improvement of the CO2/N2 selectivity without interfering on CO2 sorption capacity of the original support. CO2 sorption capacity value shown by sample SIL-5 % - [i-C5TPIm][Tf2N] (79.50 ± 0.70 mg CO2  g-1) was close to the value obtained for the pristine mesoporous silica (81.70 ± 2.20 mg CO2 g-1) and the selectivity (4.30 ± 0.70) was more than twice of the one obtained for the support alone (2.32 ± 0.4). Recycle tests demonstrated that the ILs immobilized in mesoporous silica samples are stable, providing a new option to be used in CO2 capture processes.