This work assesses the characteristics of magnetoliposomes of soybean phosphatidylcholine (SPC):cholesterol (Chol) loaded with superparamagnetic iron oxide nanoparticles (IONPs) stabilized with tetramethylammonium hydroxide (TMAOH) and their capacity to enhance magnetic resonance imaging (MRI) contrast. Magnetoliposomes of SPC were used for comparative studies. IONPs and magnetoliposomes were characterized using transmission electron microscopy, dynamic light scattering, SQUID magnetometry, FTIR and MRI. The saturation magnetization at 10K was  0.06 Am(2)/kg for SPC:Chol magnetoliposomes with 7 g iron oxide/mol of lipid and  0.05 Am(2)/kg for SPC magnetoliposomes with 21 g iron oxide/mol of lipid. As these values are associated with the number of incorporated magnetic IONPs, the saturation magnetization is 1.2 times higher for magnetoliposomes of SPC:Chol as compared with magnetoliposomes of SPC alone. The behavior of temperature dependence in both cases is typical of superparamagnetic particles. FTIR spectra evidence the increase of magnetoliposome membrane ordering with the presence of Chol. Principal component analysis (PCA) applied to FTIR spectra evidenced a clear distinction between scores for SPC:Chol, and SPC magnetoliposomes and for SPC empty liposomes. PCA applied to FTIR data differentiate magnetoliposomes from empty liposomes. MR images of aqueous phantoms obtained with and without magnetoliposomes, clearly evidence their effect on T2 image weighting.

A novel porous polymer-ionic liquid composite with poly(2-hydroxyethyl methacrylate) (PHEMA) and 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6) has been synthesized by gamma-irradiation without heat or chemical initiators. The products can be reversibly converted into organogels. The composites are potential candidates for electrochemical applications. The use of gamma-radiation can be a simple and versatile alternative way to obtain these materials. (C) 2012 Elsevier B.V. All rights reserved.

A novel porous polymer-ionic liquid composite with poly(2-hydroxyethyl methacrylate) (PHEMA) and 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6) has been synthesized by γ-irradiation without heat or chemical initiators. The products can be reversibly converted into organogels. The composites are potential candidates for electrochemical applications. The use of γ-radiation can be a simple and versatile alternative way to obtain these materials.

The enzymatic (tyrosinase) and chemical (NaIO4, Ag2O or Fremys's salt) oxidation of biologically relevant catecholamines, such as dopamine (DA), N-acetyldopamine (NADA) and the Ecstasy metabolites (alpha-MeDA and N-Me-alpha-MeDA) generates the corresponding o-quinone which can be trapped with nitrogen bionucleophiles such as N-acetyl-histidine and imidazole in a regioselective reaction that takes place predominantly at the 6-position of the catecholamine. (C) 2012 Elsevier Inc. All rights reserved.

The compounds 3'-butoxy-7-methoxyflavylium and 3'-butoxy-7-hydroxyflavylium were synthesized and the respective equilibrium and rate constants determined by two complementary techniques, pH jumps and flash photolysis. An experimental strategy based on these two techniques allowed calculation of all the equilibrium and rate constants of the system carried out for the first time in flavylium compounds lacking of the high cis-trans isomerization barrier. Irradiation of the trans-chalcone gives rise to the formation of the cis-chalcone still during the lifetime of the flash, which disappears through two parallel reactions: (i) one leading to the recovery of the trans-chalcone and the other, (ii) forming flavylium cation via hemiketal. This last reaction is globally dependent on pH and at less acidic pH the system reverts back to the trans-chalcone. The highest yield of colour production upon the flash takes place in the pH range 2-3.5. (c) 2012 Elsevier B.V. All rights reserved.

Ferritins are ubiquitous and can be found in practically all organisms that utilize Fe. They are composed of 24 subunits forming a hollow sphere with an inner cavity of similar to 80 angstrom in diameter. The main function of ferritin is to oxidize the cytotoxic Fe2+ ions and store the oxidized Fe in the inner cavity. It has been established that the initial step of rapid oxidation of Fe2+ (ferroxidation) by H-type ferritins, found in vertebrates, occurs at a diiron binding center, termed the ferroxidase center. In bacterial ferritins, however, X-ray crystallographic evidence and amino acid sequence analysis revealed a trinuclear Fe binding center comprising a binuclear Fe binding center (sites A and B), homologous to the ferroxidase center of H-type ferritin, and an adjacent mononuclear Fe binding site (site C). In an effort to obtain further evidence supporting the presence of a trinuclear Fe binding center in bacterial ferritins and to gain information on the states of the iron bound to the trinuclear center, bacterial ferritin from Desulfovibrio vulgaris (DvFtn) and its E130A variant was loaded with substoichiometric amounts of Fe2+, and the products were characterized by Mossbauer and EPR spectroscopy. Four distinct Fe species were identified: a paramagnetic diferrous species, a diamagnetic diferrous species, a mixed valence Fe2+Fe3+ species, and a mononuclear Fe2+ species. The latter three species were detected in the wild-type DvFtn, while the paramagnetic diferrous species was detected in the E130A variant. These observations can be rationally explained by the presence of a trinuclear Fe binding center, and the four Fe species can be properly assigned to the three Fe binding sites. Further, our spectroscopic data suggest that (1) the fully occupied trinuclear center supports an all ferrous state, (2) sites B and C are bridged by a mu-OH group forming a diiron subcenter within the trinuclear center, and (3) this subcenter can afford both a mixed valence Fe2+Fe3+ state and a diferrous state. Mechanistic insights provided by these new findings are discussed and a minimal mechanistic scheme involving O-O bond cleavage is proposed.

Native agars from Gracilaria vermiculophylla produced in sustainable aquaculture systems (IMTA) were extracted under conventional (TWE) and microwave (MAE) heating. The optimal extracts from both processes were compared in terms of their properties. The agars’ structure was further investigated through Fourier transform infrared and NMR spectroscopy. Both samples showed a regular structure with an identical backbone, β-D-galactose (G) and 3,6-anhydro-α-L-galactose (LA) units; a considerable degree of methylation was found at C6 of the G units and, to a lesser extent, at C2 of the LA residues. The methylation degree in the G units was lower for MAEopt agar; the sulfate content was also reduced. MAE led to higher agar recoveries with drastic extraction time and solvent volume reductions. Two times lower values of [η] and Mv obtained for the MAEopt sample indicate substantial depolymerization of the polysaccharide backbone; this was reflected in its gelling properties; yet it was clearly appropriate for commercial application in soft-texture food products.

This work reports a novel strategy to prepare affinity composite membranes using supercritical fluid technology. By blending molecularly imprinted polymeric particles with PMMA, a porous hybrid structure with affinity to the template molecule, bisphenol A, was prepared using a supercritical carbon dioxide (scCO2)-assisted method. Membranes were characterized in terms of morphology, mechanical performance and transport properties. The ability of the polymers and hybrid membranes to adsorb bisphenol A was tested in aqueous solutions and fitted to a linearized Langmuir equation, showing that adsorption takes place at homogeneous affinity binding sites within the imprinted surface. Filtration experiments showed that the imprinted hybrid membrane was able to adsorb higher amounts of template even in non-equilibrium dynamic binding conditions. The hybridization of the \{PMMA\} membrane herein reported conveys two important improvements over neat \{PMMA\} membrane: it introduced molecular affinity towards the template molecule and significantly increased the permeability of the porous structures, which are key parameters in processes that involve membranes. This technique could expand the applications of polymeric beads powders and enhance the efficiency of the membrane's transport properties. Our work presents a new method to confer affinity to a porous structure by immobilization of imprinted polymers, combining polymer synthesis and membrane formation using supercritical fluid technology.

Molecularly imprinted polymeric particles with molecular recognition towards Bisphenol A (BPA) were synthesized for the first time using the semi-covalent imprinting approach in supercritical carbon dioxide (scCO2). The material{'}s affinity to BPA was achieved by co-polymerizing ethylene glycol dimethacrylate (EGDMA) with a template-containing monomer{,} Bisphenol A dimethacrylate (BPADM) in scCO2. Bisphenol A is then cleaved from the polymeric matrix by hydrolysis with tetrabutylammonium hydroxide (n-Bu4OH) also in a supercritical environment{,} taking advantage of the high diffusivity of scCO2. The selectivity of the molecular imprinted polymer (MIP) was assessed by evaluating its capability to bind BPA in comparison with progesterone and [small alpha]-ethinylestradiol. In addition{,} the cross-linked particles were used to prepare a PMMA-based hybrid imprinted membrane by a scCO2-assisted phase inversion method. Results show that the incorporation of MIP particles was able to confer molecular affinity to BPA to the membrane and that at dynamic conditions of filtration{,} this imprinted porous structure was able to adsorb a higher amount of BPA than the corresponding non-imprinted hybrid membrane. Our work represents a valuable greener alternative to conventional methods{,} for the synthesis of affinity materials which are able to maintain molecular recognition properties in water.

Sistema para detección, identificación y cuantificación en material biológico, compuesto por una o más fuentes de luz (1) combinado con uno o más fotosensores ópticos (6 y 7) y diversos componentes electrónicos (4), necesarios para obtener/procesar la señal emitida caracterizado por: a) La fuente de luz (1), pulsada (2) o no, compuesta de láseres de estado sólido de baja energía o diodos emisores de luz, cuyo rango de longitud de onda está localizado entre 400 y 800 nm con una intensidad de luminosidad controlable que varía entre los valores de 0.01 mW/cm 2 y 100 mW/cm 2 ; b) El fotosensor, sencillo (6 y 7a) y (6 y 7b) o integrado (6, 4 y 7) compuesto de películas delgadas de silicio amorfo o nanocristalino o microcristalino y/o por semiconductores de cerámica tales como IGZO, IAgZO, SnZIO, GZIO, CuOIZ, GITO, entre otros, y basado en estructuras tipo pi'ii'n o MIS, que funciona en un rango de longitudes de onda desde el infrarrojo hasta el ultravioleta, y prové una información cualitativa y cuantitativa basada en la hibridización especifica y selectiva de sondas funcionalizadas con nanopartículas de metal; c) Siendo provista la eliminación del sistema a través de una fuente de energía convencional o a través de baterías fotovoltaicas, que dan portabilidad al sistema, siendo focalizada la luz emitida sobre la muestra, preferiblemente utilizando microlentes, siendo la muestra o muestras no fijadas físicamente al sensor o sensores, colocando la muestra biológica referida (5) sobre el lado opuesto (6) del sustrato donde se deposita el fotosensor (6 y 7).

n/a