The bacterium Geotalea uraniireducens, commonly found in uranium-contaminated environments, plays a key role in bioremediation strategies by converting the soluble hexavalent form of uranium (UVI) into less soluble forms (e.g. UIV.). While most of the reduction and concomitant precipitation of uranium occur outside the cells, there have been reports of important reduction processes taking place in the periplasm. In any case, the triheme periplasmic cytochromes are crucial players, either by ensuring an effective interface between the cell´s interior and exterior or by directly participating in the reduction of the metal. Therefore, understanding the functional mechanism of the highly abundant G. uraniireducens’ triheme cytochromes is crucial to assist the elucidation on the respiratory pathways in this bacterium. In this work, a detailed functional characterization of the triheme cytochromes PpcA and PpcB from G. uraniireducens was conducted using NMR and visible spectroscopy techniques. Despite sharing high amino acid sequence and structural homology with their counterparts from G. sulfurreducens, the results obtained showed that the heme reduction potential values are less negative, the order of oxidation of the hemes is distinct, and the redox and redox-Bohr network of interactions revealed unprecedented functional mechanisms of the G. uraniireducens cytochromes. In these cytochromes, the reduction potential values of the three heme groups are much more similar, hence covering a narrow range of values, features that facilitate the directional electron flow from the inner membrane, thereby favouring the optimal reduction of uranium.

This work explores the application of Reverse Osmosis (RO) upcycled membranes, as Anion Exchange Membranes (AEMs) in Donnan Dialysis (DD) and related processes, such as the Ion Exchange Membrane Bioreactor (IEMB), for the removal of nitrate from contaminated water, to meet drinking water standards. Such upcycled membranes might be manufactured at a lower price than commercial AEMs, while their utilization reinforces the commitment to a circular economy transition. In an effort to gain a better understanding of such AEMs, confocal µ-Raman spectroscopy was employed, to assess the distribution of the ion-exchange sites through the thickness of the prepared membranes, and 2D fluorescence spectroscopy, to evaluate alterations in the membranes caused by fouling and chemical cleaning The best performing membrane reached a 56% average nitrate removal within 24 h in the DD and IEMB systems, with the latter furthermore allowing for simultaneous elimination of the pollutant by biological denitrification, thus avoiding its discharge into the environment. Overall, this work validates the technical feasibility of using RO upcycled AEMs in DD and IEMB processes for nitrate removal. This membrane recycling concept might also find applications for the removal and/or recovery of other target negatively charged species.

An innovative pilot installation and eddy current testing (ECT) inspection system for laser-brazed joints is presented. The proposed system detects both surface and sub-surface welding defects operating autonomously and integrated with a robotized arm. Customized eddy current probes were designed and experimentally validated detecting pore defects with 0.13 mm diameter and sub-surface defects buried 1 mm deep. The integration of the system and the manufacturing process towards an Industry 4.0 quality control paradigm is also discussed.

In this work, we prepared new biocompatible N-alkyl cholinium-based ionic liquids to be used as cosolvents to improve the solubility of poorly water-soluble drugs, namely, sodium diclo-fenac and paracetamol. In this set of ionic liquids, we intend to understand the effect of increasing the asymmetry of the ionic liquid cation/anion by growing the length of one of the alkyl chains attached to the nitrogen center/sulfonate center on the dissolution capacity of the ionic liquid. The addition of these new ionic liquids to water increased the dissolution capacity of the drugs up to four-times that in water, and improved the pharmacodynamic properties of these drugs, especially the case of sodium diclofenac. The intermolecular interactions between the drugs and ionic liquids were investigated by NMR. Two-dimensional1H/1H nuclear overhauser effect spectroscopy (NO-ESY) revealed an interaction between sodium diclofenac and the alaninate anion from the [C2Ch]2[SucAla]. In the case of paracetamol and [C4Ch][C2SO3], it was possible to observe two inter-molecular interactions between the hydroxyl group of paracetamol and two protons from the cation [C4Ch]+. Interestingly, the ionic liquid bearing a succinyl-DL-alaninate anion, [SucAla]2−, and a N-ethyl cholinium cation, [C2Ch]+, which presented the highest ability to dissolve sodium diclofenac, showed no cytotoxicity up to 500 mM. Therefore, this ionic liquid is a potential candidate for drug delivery applications.

Cancer remains as one of the major causes of mortality worldwide. Recent advances in nanoparticles based therapy mark a new era on cancer treatment. Many groups have investigated biological/physical effects of nanoparticles on tumour cells and how these vary with physical parameters such as particle size, shape, concentration and distribution. Magnetic hyperthermia (MHT) can be an alternative or an add-value therapy with demonstrated effectiveness. MHT uses magnetic nanoparticles, which can be directly applied to the tumour, where, by applying an external ac magnetic field, will promote a localized temperature increment that can be controlled.

The physical properties of the cubic and ferrimagnetic spinel ferrite LiFe5O8 has made it an attractive material for electronic and medical applications. In this work, LiFe5O8 nanosized crystallites were synthesized by a novel and eco-friendly sol-gel process, by using powder coconut water as a mediated reaction medium. The dried powders were heat-treated (HT) at temperatures between 400 and 1000 °C, and their structure, morphology, electrical and magnetic characteristics, cytotoxicity, and magnetic hyperthermia assays were performed. The heat treatment of the LiFe5O8 powder tunes the crystallite sizes between 50 nm and 200 nm. When increasing the temperature of the HT, secondary phases start to form. The dielectric analysis revealed, at 300 K and 10 kHz, an increase of ε′ (≈10 up to ≈14) with a tanδ almost constant (≈0.3) with the increase of the HT temperature. The cytotoxicity results reveal, for concentrations below 2.5 mg/mL, that all samples have a non-cytotoxicity property. The sample heat-treated at 1000 °C, which revealed hysteresis and magnetic saturation of 73 emu g−1 at 300 K, showed a heating profile adequate for magnetic hyperthermia applications, showing the potential for biomedical applications.

Several problems and limitations faced in the treatment of many diseases can be overcome by using controlled drug delivery systems (DDS), where the active compound is transported to the target site, minimizing undesirable side effects. In situ-forming hydrogels that can be injected as viscous liquids and jellify under physiological conditions and biocompatible clay nanoparticles have been used in DDS development. In this work, polymer–clay composites based on Pluronics (F127 and F68) and nanoclays were developed, aiming at a biocompatible and injectable system for long-term controlled delivery of methylene blue (MB) as a model drug. MB release from the systems produced was carried out at 37 °C in a pH 7.4 medium. The Pluronic formulation selected (F127/F68 18/2 wt.%) displayed a sol/gel transition at approx. 30 °C, needing a 2.5 N force to be injected at 25 °C. The addition of 2 wt.% of Na116 clay decreased the sol/gel transition to 28 °C and significantly enhanced its viscoelastic modulus. The most suitable DDS for long-term application was the Na116-MB hybrid from which, after 15 days, only 3% of the encapsulated MB was released. The system developed in this work proved to be injectable, with a long-term drug delivery profile up to 45 days.

POXylated polyurea dendrimer nanoparticles (PUREG4OOx48) are loaded with sildenafil (SDF) by a supercritical carbon dioxide–assisted (scCO2) impregnation. Further supercritical CO2-assisted spray drying (SASD) leads to hybrid nano-in-micro dry powder formulations that are investigated aiming at efficient pulmonary delivery of SDF in pulmonary arterial hypertension treatment. This is the first report of the production of poly(D,L-lactide-co-glycolide)-cholesterol (PLGA-Chol) microparticles processed by SASD. The optimized formulation of nano-in-microparticles is composed of PLGA, Chol, and PUREG4OOx48, loaded with SDF solutions in a 77:23 ratio (PLGA-Chol:dendrimer, w/w). The dry powders are fully characterized and found to be highly biodegradable and biocompatible, and the SDF release profile evaluates under different pH values. The median mass average diameter (MMAD) of the nano-in-micro systems varies between 2.57 and 5 µm and the fine particle fraction (FPF) between 36% and 29% for PUREG4OMeOx48[PLGA-Chol] and PUREG4OEtOx48[PLGA-Chol], respectively. The data validate the potential use of these new formulations in inhalation therapy. In vitro studies are also carried out in order to evaluate the effect of the free drug in cell viability and formulations cytotoxicity.

The continuous advances in molecular genetics have prompt for a wealth of tools capable to modulate genome and the corresponding gene expression. These innovative technologies have broadened the range of possibilities for gene therapy, either to decrease expression of malignant genes and mutations or edition of genomes for correction of errors. These strategies rely on the delivery of therapeutic nucleic acids to cells and tissues that must overcome several biological barriers. Indeed, a key element for the success of any gene therapy formulation is the carrier agent capable to deliver the therapeutic nucleic acid moieties to a specific target and promote efficient cellular uptake, while preventing deleterious off-target effects and degradation by endogenous nucleases. The initial vectorization strategies proved to be rather immunogenic, limited in the amount of genetic material that can be packed and raised severe toxicity concerns. Nowadays, a new generation of nanotechnology-based gene delivery systems are making an impact on the way we use therapeutic nucleic acids. These nanovectorization platforms have been developed so as to show low immunogenicity, low toxicity, ease of assembly and scale-up with higher loading capacity. Some of these nanoscale systems have also allowed for controlled release system and for the simultaneous capability of monitorization of effect - nanotheranostics. Herein, we provide a review on the variety of gene delivery vectors and platforms at the nanoscale.

Abstract POXylated polyurea dendrimer nanoparticles (PUREG4OOx48) are loaded with sildenafil (SDF) by a supercritical carbon dioxide–assisted (scCO2) impregnation. Further supercritical CO2-assisted spray drying (SASD) leads to hybrid nano-in-micro dry powder formulations that are investigated aiming at efficient pulmonary delivery of SDF in pulmonary arterial hypertension treatment. This is the first report of the production of poly(D,L-lactide-co-glycolide)-cholesterol (PLGA-Chol) microparticles processed by SASD. The optimized formulation of nano-in-microparticles is composed of PLGA, Chol, and PUREG4OOx48, loaded with SDF solutions in a 77:23 ratio (PLGA-Chol:dendrimer, w/w). The dry powders are fully characterized and found to be highly biodegradable and biocompatible, and the SDF release profile evaluates under different pH values. The median mass average diameter (MMAD) of the nano-in-micro systems varies between 2.57 and 5 µm and the fine particle fraction (FPF) between 36% and 29% for PUREG4OMeOx48[PLGA-Chol] and PUREG4OEtOx48[PLGA-Chol], respectively. The data validate the potential use of these new formulations in inhalation therapy. In vitro studies are also carried out in order to evaluate the effect of the free drug in cell viability and formulations cytotoxicity.

A new family of eighteen Cu(i) complexes of the general formula [Cu(PP)(LL)][BF4], where PP is a phosphane ligand and LL represents an N,O-heteroaromatic bidentate ligand, has been synthesized and fully characterized by classical analytical and spectroscopic methods. Five complexes of this series were also characterized by single crystal X-ray diffraction studies. The cytotoxicity of all compounds was evaluated in breast (MCF7) and prostate (LNCap) human cancer cells and in a normal prostate cell line (RWPE). In general, all compounds showed higher cytotoxicity for the prostate cancer cells than for the breast cells, with IC50 values in the range 0.2-2 muM after 24 h of treatment. The most cytotoxic compound, [Cu(dppe)(2-ap)][BF4] (16), where dppe = 1,2-bis(diphenylphosphano) ethane and 2-ap = 2-acetylpyridine, showed a high level of cellular internalization, generation of intracellular ROS and activation of the cell death mechanism via apoptosis/necrosis. Owing to its high cytotoxic activity for LNCap cells, being 70-fold higher than that for normal prostate cells (RWPE), complex (16) was found to be the most promising for further research in prostate cancer models.

Ionic liquids (ILs) are among the most studied and promising materials for selective CO2 capture and transformation. The high CO2 sorption capacity associated with the possibility to activate this rather stable molecule through stabilization of ionic/radical species or covalent interactions either with the cation or anion has opened new avenues for CO2 functionalization. However, recent reports have demonstrated that another simpler and plausible pathway is also involved in the sorption/activation of CO2 by ILs associated with basic anions. Bare ILs or IL solutions contain almost invariable significant amounts of water and through interaction with CO2 generate carbonates/bicarbonates rather than carbamic acids or amidates. In these cases, the IL acts as a base and not a nucleophile and yields buffer‐like solutions that can be used to shift the equilibrium toward acid products in different CO2 reutilization reactions. In this Minireview, the emergence of IL buffer‐like solutions as a new reactivity paradigm in CO2 capture and activation is described and analyzed critically, mainly through the evaluation of NMR data.