The close structural similarity between the two cyclooxygenase (COXs) isoforms and the absence of selective inhibitors without side effects continues to stimulate the development of novel approaches towards selective anti-inflammatory drugs. In the present study a small library of new indolic compounds involving two different substitutions patterns at the indole scaffold was synthesized. In order to establish a relation between the spatial distribution of known functional groups related with inhibitory activity, two substitution patterns were explored: one with substituents at N-1, C-3, C-5 positions and another at C-2, C-3 and C5 positions. Accordingly, indole positions C-5, C-3 and N-1 were substituted with: sulfonamide or methylsulfone at C-5, p-halo-benzyl group at C-3, and an alkyl chain with a trifluoromethyl group at N-1. Alternatively, a p-halo-benzyl group was introduced at C-2, leaving the indolic nitrogen free. Inhibitory studies were performed and the activity results obtained against both COXs isoforms were rationalized based on docking and NMR studies. Docking studies show that dialkyation at C-2 and C-3 favors a binding with an orientation similar to that of the known selective inhibitor SC-558. From the tested compounds, this substitution pattern is correlated with the highest inhibitory activity and selectivity: 70% COX-2 inhibition at 50 M, and low COX-1 inhibition (18±9%). Additionally, Saturation Transfer Difference NMR experiments reveal different interaction patterns with both COXs isoforms that may be related with different orientations of the sulfonamide group in the binding pocket. Despite the moderated inhibitory activities found, this study represents an innovative approach towards COXs inhibitory activity rationalization and to the design of anti-inflammatory drugs.

n/a

This paper describes for the first time the intimate molecular details of the association between a platinated oligonucleotide and a zinc-finger peptide. Site-specific platination of the guanine in a ss hexanucleotide gave {[Pt(dien)d(5’-TACGCC-3’)], Pt(dien)(6-mer)}, II, characterized by mass spectrometry and 1H-NMR spectroscopy. The work extends the study of platinum-nucleobase complex-zinc finger interactions using small molecules such as [Pt(dien)(9-EtGua)]2+, I . The structure of the (34-52) C-terminal finger of the HIV nucleocapsid protein HIVNCp7 (ZF1) was characterized by 1H-NMR spectroscopy and compared with that of the N-terminal single finger and the 2-finger “intact” NCp7. Interaction of II with ZF1 results in significant changes in comparison to the “free” uncomplexed hexanucleotide – the major shifts occur for Trp37 resonances are broadened and shifted upfield and other major shifts are for Gln45 (H21, H3, Q), Met46 (NH, H2), Lys47 (NH, Q) and Glu50 (H2, H3). The Zn-Cys/His chemical shifts show only marginal deviations. The solution structure of ZF1, the 6-mer/ZF1 and II/ZF1 adducts were calculated from the NOESY-derived distance constraints. The DNA position in II/ZF1 is completely different than in the absence of platinum. Major differences are the appearance of new Met46-Cyt6H5 and Trp37-Cyt5H5 contacts but severe weakening of the Trp37-Gua4 contact, attributed to the steric effects caused by Gua4 platination, accompanied by a change in the position of the aromatic ring. The results demonstrate the feasibility of targetting specific ZF motifs with DNA-tethered coordination compounds, such as Pt compounds and Co-macrocycles – with implications for drug targetting and indeed the intimate mechansims of DNA repair of platinated DNA.

The function of prion-like protein Doppel was suggested to be related to male fertility. In this study, the importance of ovine Doppel polypeptide on spermatozoa capacitation and fertilization was evaluated. After refolding, recombinant Doppel (rDpl) was supplemented with different concentrations (40, 80 or 190 ng/ml) to ovine spermatozoa during the capacitation process. In experiment 1, post-thawed ovine spermatozoa were incubated with different concentrations of rDpl during 1 h for swim-up, and changes in sperm motility, concentration, vigour, viability and capacitation were monitored (10 replicates). In experiment 2, the fertilization ability of post-swim-up spermatozoa incubated as above was tested through heterologous fertilization of bovine in vitro matured oocytes (n = 423, three replicates). Regardless of dosage, rDpl improved (p = 0.03) spermatozoa viability. Sperm individual motility and vigour were the highest (p = 0.04) for the group receiving 190 ng/ml rDpl. Sperm supplemented with the highest doses of rDpl achieved higher (p = 0.02) fertilization rates (56.0 +/- 3.0%) than control (39.1 +/- 2.2%) and 40 ng/ml rDpl (39.8 +/- 2.7%). Preliminary data suggest that Doppel protein may enhance in vitro spermatozoa fertilizing ability.

This work reports a novel strategy to prepare affinity composite membranes using supercritical fluid technology. By blending molecularly imprinted polymeric particles with PMMA, a porous hybrid structure with affinity to the template molecule, bisphenol A, was prepared using a supercritical carbon dioxide (scCO2)-assisted method. Membranes were characterized in terms of morphology, mechanical performance and transport properties. The ability of the polymers and hybrid membranes to adsorb bisphenol A was tested in aqueous solutions and fitted to a linearized Langmuir equation, showing that adsorption takes place at homogeneous affinity binding sites within the imprinted surface. Filtration experiments showed that the imprinted hybrid membrane was able to adsorb higher amounts of template even in non-equilibrium dynamic binding conditions. The hybridization of the \{PMMA\} membrane herein reported conveys two important improvements over neat \{PMMA\} membrane: it introduced molecular affinity towards the template molecule and significantly increased the permeability of the porous structures, which are key parameters in processes that involve membranes. This technique could expand the applications of polymeric beads powders and enhance the efficiency of the membrane's transport properties. Our work presents a new method to confer affinity to a porous structure by immobilization of imprinted polymers, combining polymer synthesis and membrane formation using supercritical fluid technology.

Molecularly imprinted polymeric particles with molecular recognition towards Bisphenol A (BPA) were synthesized for the first time using the semi-covalent imprinting approach in supercritical carbon dioxide (scCO2). The material{'}s affinity to BPA was achieved by co-polymerizing ethylene glycol dimethacrylate (EGDMA) with a template-containing monomer{,} Bisphenol A dimethacrylate (BPADM) in scCO2. Bisphenol A is then cleaved from the polymeric matrix by hydrolysis with tetrabutylammonium hydroxide (n-Bu4OH) also in a supercritical environment{,} taking advantage of the high diffusivity of scCO2. The selectivity of the molecular imprinted polymer (MIP) was assessed by evaluating its capability to bind BPA in comparison with progesterone and [small alpha]-ethinylestradiol. In addition{,} the cross-linked particles were used to prepare a PMMA-based hybrid imprinted membrane by a scCO2-assisted phase inversion method. Results show that the incorporation of MIP particles was able to confer molecular affinity to BPA to the membrane and that at dynamic conditions of filtration{,} this imprinted porous structure was able to adsorb a higher amount of BPA than the corresponding non-imprinted hybrid membrane. Our work represents a valuable greener alternative to conventional methods{,} for the synthesis of affinity materials which are able to maintain molecular recognition properties in water.

The properties of the light flexible device, ion jelly, which combines gelatin with an ionic liquid (IL) were recently reported being promising to develop safe and highly conductive electrolytes. This article aims for the understanding of the ion jelly conductive mechanism using dielectric relaxation spectroscopy (DRS) in the frequency range 10-1-106 Hz; the study was complemented with differential scanning calorimetry (DSC) and pulse field gradient nuclear magnetic resonance (PFG NMR) spectroscopy. The room temperature ionic liquid 1-butyl-3-methylimmidazolium dicyanamide (BMIMDCA) used as received (1.9% w/w water content) and with 6.6% (w/w) of water content and two ion jellies with two different ratios BMIMDCA/gelatin/water % (w/w), IJ1 (41.1/46.7/12.2) and IJ3 (67.8/25.6/6.6), have been characterized. A glass transition was detected by DSC for all materials allowing for classifying them as glass formers. For the ionic liquid, it was observed that the glass transition temperature decreases with the increase of water content. While in subsequent calorimetric runs crystallization was observed for BMIMDCA with negligible water content, no crystallization was detected for any of the ion jelly materials upon themal cycling. To the dielectric spectra of all tested materials, both dipolar relaxation and conductivity contribute; at the lowest frequencies, electrode and interfacial polarization highly dominate. Conductivity, which manifests much more intensity relative to dipolar reorientations, strongly evidences subdiffusive ion dynamics at high frequencies. From dielectric measures, transport properties as mobility and diffusion coefficients were extracted. Data treatment was carried out in order to deconvolute the average diffusion coefficients estimated from dielectric data in its individual contributions of cations (D+) and anions (D-). The D+ values thus obtained for IJ3, the ion jelly with the highest IL/gelatin ratio, cover a large temperature range up to room temperature and revealed excellent agreement with direct measurements from PFG NMR, obeying to the same VFT equation. For BMIMDCA6.6%water, which has the same water amount as IJ3, the diffusion coefficients were only estimated from DRS measurements over a limited temperature range; however, a single VFT equation describes both DRS and PFG NMR data. Moreover, it was found that the diffusion coefficients and mobility are similar for the ionic liquid and IJ3, which points to a role of both water and gelatin weakening the contact ion pair, facilitating the translational motion of ions and promoting its dissociation; nevertheless, it is conceivable that a critical composition of gelatin that leads to those properties. The VFT temperature dependence observed for the conductivity was found to be determined by a similar dependence of the mobility. Both conductivity and segmental motion revealed to be correlated as inferred by the relatively low values of the decoupling indexes. The obtained results show that ion jelly could be in fact a very promising material to design novel electrolytes for different electrochemical devices, having a performance close to the IL but presenting an additional stability regarding electrical measurements and resistance against crystallization relative to the bulk ionic liquid.

Technology assessment is essentially a systematic method used to investigate technology developments and assess their potential impacts on society. The assessment of emerging technologies, however, requires special attention. To address technologies at early stages of development, Constructive Technology Assessment (CTA) is considered to be one of the best options to bypass the Collingridge dilemma - which fundamentally states that controlling the direction of a technology’s development is very hard. Technologies at early stages of development might appear to be unorganized, chaotic and with high level of uncertainty on future paths to take. Future Oriented Technology Analysis (FTA) represents any systematic process to produce judgments about the characteristics of emerging technologies, its development pathways, and potential future impacts. Technology Assessment is considered to be one of three subjects which form the umbrella concept of FTA. The technology assessed on this project, Brain-Computer Interface (BCI) or Brain-Machine Interface (BMI) is an emerging technology. BCIs can be defined as a technology which allows for the direct communication between the brain and an external device. It is a truly direct connection, with no use of the normal output pathways of peripheral nerves and muscles, allowing for the brain to have control over objects and softwares without intermediates. As an emerging technology, BCI is at its early stages of research and thus many challenges are still ahead. Mainstream adoption is not expected in least 10 years. There are still many problems and challenges to be overcome. The real impacts of BCI will depend directly on the development of competing technologies. If there is improvement in BCI research, then the potential applications and end users could grow dramatically. The findings of this project will be of relevant importance to researchers of the technology (especially on what concerns their interactions with other stakeholders

We present a new approach for real-time monitoring of PCR amplification of a specific sequence from the human c-MYC proto-oncogene using a Ta(2)O(5) electrolyte-insulator-semiconductor (EIS) sensor. The response of the fabricated EIS sensor to cycle DNA amplification was evaluated and compared to standard SYBR-green fluorescence incorporation, showing it was possible to detect DNA concentration variations with 30 mV/μM sensitivity. The sensor's response was then optimized to follow in real-time the PCR amplification of c-MYC sequence from a genomic DNA sample attaining an amplification profile comparable to that of a standard real-time PCR. Owing to the small size, ease of fabrication and low-cost, the developed Ta(2)O(5) sensor may be incorporated onto a microfluidic device and then used for real-time PCR. Our approach may circumvent the practical and economical obstacles posed by current platforms that require an external fluorescence detector difficult to miniaturize and incorporate into a lab-on-chip system.

Formate dehydrogenases (FDHs) are enzymes that catalyze the formate oxidation to carbon dioxide and that contain either Mo or W in a mononuclear form in the active site. In the present work, the influence of Mo and W salts on the production of FDH by Desulfovibrio alaskensis NCIMB 13491 was studied. Two different FDHs, one containing W (W-FDH) and a second incorporating either Mo or W (Mo/W-FDH), were purified. Both enzymes were isolated from cells grown in a medium supplemented with 1 muM molybdate, whereas only the W-FDH was purified from cells cultured in medium supplemented with 10 muM tungstate. We demonstrated that the genes encoding the Mo/W-FDH are strongly downregulated by W and slightly upregulated by Mo. Metal effects on the expression level of the genes encoding the W-FDH were less significant. Furthermore, the expression levels of the genes encoding proteins involved in molybdate and tungstate transport are downregulated under the experimental conditions evaluated in this work. The molecular and biochemical properties of these enzymes and the selective incorporation of either Mo or W are discussed.

Saturation transfer difference (STD) NMR has emerged as one of the most popular ligand-based NMR techniques for the study of protein-ligand interactions. The success of this technique is a consequence of its robustness and the fact that it is focused on the signals of the ligand, without any need of processing NMR information about the receptor and only using small quantities of nonlabeled macromolecule. Moreover, the attractiveness of this experiment is also extendable to the classroom. In the context of a practical NMR class, this experiment is ideal to illustrate some fundamental NMR concepts, such as the nuclear Overhauser effect and relaxation in a multidisciplinary context, bridging chemistry and biochemistry with a taste of medicinal chemistry.

We use the readily available human serum albumin (HSA), 6-d,l-methyl-tryptophan (6-CH3-Trp), and 7- d,l-methyl-tryptophan (7-CH3-Trp) to introduce the STD-NMR experiment and to illustrate its applicability for ligand screening, mapping of binding moieties, and determination of the dissociation constant, in a context that can be explored or adapted to the student’s course level and topic (chemistry or biochemistry). We also cover the most important theoretical aspects of the STD experiment, calling attention to some of its limitations and drawbacks without a complex theoretical approach.

In this paper we report on the fabrication and performance of a portable and low cost optoelectronic platform integrating a double color tuned light emitting diode as light source, an amorphous/nanocrystalline silicon photodetector with a flat spectral response in the wavelength range from 520. nm to 630. nm and integrated electronic for signal acquisition and conditioning constituted by current to voltage converter, a filter and an amplification stage, followed by an analog to digital converter, with appropriate software for full automation to minimize human error. Incorporation of the double color tuned light emitting diode provides for a simple yet innovative solution to signal acquisition independently from the light intensity and/or solution concentration, while considerably decreasing production costs. Detection based on Au-nanoprobes constitutes the biorecognition step and allowed identification of specific sequences of Mycobacterium tuberculosis complex, namely Mycobacterium bovis and M. tuberculosis in biological samples.

In this work, coloured glasses were produced based on the synthesis of gold and silver nanoparticles by the sol-gel process having in mind their application in art works. Gold and silver were used separately or as a mixture by varying the mole fractions in order to get a range of colours from yellow to red. The gold and silver nanoparticles were prepared by the reduction of tetrachloroauric acid and silver nitrate with sodium citrate in aqueous solutions which were further introduced in the sol-gel system. Attention was focused on the thermal treatment of the sol-gel samples. Different temperatures were used in order to determine their influence on the obtained colour. The glasses were characterized by UV-Vis absorption spectroscopy and the size of the nanoparticles was examined by transmission electron microscopy (TEM). The range of colours mentioned above is obtained either by preparing nanoparticles of each metal and mixing them or by preparing nanoparticles from solutions containing initially ions of both metals. In the former case, two surface plasmon resonance (SPR) bands were observed for temperatures below 200 degrees C while higher temperatures promote the formation of alloys between the Ag and Au nanoparticles. In the latter case, only one SPR band is observed and the nanoparticle size distribution is narrower. The results were explained by nanoparticle aggregation promoted by temperature. Glasses containing only Ag did not present the typical yellow colour above 300 degrees C but it was shown that the colour could be stabilized if Au was added in small amounts (Au/Ag molar ratio 0.1). (C) 2010 Elsevier B.V. All rights reserved.