Zinc oxide (ZnO) is a widely studied wide band gap semiconductor with applications in several fields, namely to enhance solar cells efficiency. Its ability to be grown in a wide variety of nanostructured morphologies, allowing the designing of the surface area architecture constitutes an important advantage over other semiconductors. Laser assisted flow deposition (LAFD) is a recently developed growth method, based on a vapour-solid mechanism, which proved to be a powerful approach in the production of ZnO micro/nanostructures with different morphologies as well as high crystallinity and optical quality. In the present work we report the use of the LAFD technique to grow functional ZnO nanostructures (nanoparticles and tetrapods) working as nano templates to improve the dye-sensitized solar cells (DSSCs) efficiency. The structural and morphological characterization of the as-grown ZnO crystals were performed by X-ray diffraction and electron microscopy, respectively, and the optical quality was assessed by photoluminescence spectroscopy. DSSCs were produced using a combination of these nanostructures, which were subsequently sensitized with N719 dye. An efficiency of ∼3{%} was achieved under simulated AM 1.5 illumination conditions for a dye loading time of 1 h.

\{pH is a vital physiological parameter that can be used for disease diagnosis and treatment as well as in monitoring other biological processes. Metal/metal oxide based pH sensors have several advantages regarding their reliability, miniaturization, and cost-effectiveness, which are critical characteristics for in vivo applications. In this work, WO3 nanoparticles were electrodeposited on flexible substrates over metal electrodes with a sensing area of 1 mm(2). These sensors show a sensitivity of -56.7 +/- 1.3 mV/pH, in a wide pH range of 9 to 5. A proof of concept is also demonstrated using a flexible reference electrode in solid electrolyte with a curved surface. A good balance between the performance parameters (sensitivity), the production costs, and simplicity of the sensors was accomplished, as required for wearable biomedical devices.\}

The global transition to electric vehicles and renewable energy systems has heightened the demand for lithium-ion batteries (LIBs), creating an urgent need for sustainable battery recycling methods to recover critical raw materials, including lithium. Lithium-selective cation-exchange polymeric membranes are one of the emerging options to achieve such lithium recycling. To make this change even greener, instead of using traditional fossil-origin polymers to produce membranes, this research employed bacterial cellulose acetate (BCA), a bio-derived and eco-friendly polymer. By adding 5 wt% N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13–TFSI), an ionic liquid (IL) which is a plasticizer and lithium-ion conductor, and 20 wt% hydrogen manganese oxide (HMO), which is a lithium-selective inorganic filler, four BCA-based membranes (BCA, BCA-IL, BCA-HMO and BCA-IL-HMO) were prepared. The membranes were extensively characterized for their morphology, thermal stability, chemical, and mechanical properties. Subsequently, they were tested in diffusion cells (without applying any external driving force) for ionic conductivity, lithium selectivity, and lithium flux using binary salt mixtures and synthetic LIB leachate. The BCA-IL membrane outperformed other BCA-based membranes in terms of separation factors, achieving values of 10.50 (Li+/Mn2+), 11.75 (Li+/Ni2+), and 10.95 (Li+/Co2+) with a lithium flux of 0.12 mol m−2 h−1 when processing synthetic LIB leachate. Under the same conditions, the BCA-HMO membranes exhibited a higher lithium flux (0.51 mol m−2 h−1) but with lower separation factor values of 3.39 (Li+/Mn2+), 3.62 (Li+/Ni2+), and 3.36 (Li+/Co2+). The use of plant-derived cellulose acetate (CA) as an alternative to BCA was also assessed; however, despite promising ideal lithium selectivity values (for example, 112 for Li+/Ni2+ in the case of CA-HMO membrane), their conductivity was up to two orders of magnitude lower than that of BCA-based membranes. All these findings highlight the promising potential of BCA-based membranes for lithium recovery from lithium-ion battery leachates.

Polysaccharides in plant cell walls serve as a rich carbon and energy source, yet their structural complexity presents a barrier to efficient degradation. To address this, anaerobic microorganisms like R. flavefaciens have developed sophisticated multi-enzyme complexes known as cellulosomes, which enable the efficient breakdown of these recalcitrant polysaccharides. These complexes are assembled through high-affinity interactions between cohesin (Coh) modules in scaffoldin proteins and dockerin (Doc) modules in cellulosomal enzymes. R. flavefaciens FD-1 harbors one of the most intricate cellulosomes described to date, comprising over 200 Doc-containing proteins encoded in its genome. Despite substantial research on this cellulosome, the role of a group of truncated but functional dockerins, known as group-2 Docs, remains unclear. In this study, we present a detailed structural and binding analysis of a Coh-Doc complex involving the cohesin from the cell-anchoring scaffoldin ScaE and a group-2 Doc that bears only one of the two Ca+2-coordinating loops that characterise the canonical Docs. Our findings reveal a novel tripartite binding mechanism, in which the cohesin can simultaneously bind two distinct dockerin units in three alternative conformations. This discovery provides new insights into the modular versatility of the R. flavefaciens cellulosome and sheds light on the mechanisms that enhance its efficiency in polysaccharide degradation.