A systematic study of the electrochromic (EC) behavior of electropolymerized poly[M(salen)] films (M = Ni, Cu, and Pd) was performed by spectroelectrochemistry. Color contrast between oxidized and reduced states, stability under square wave potential cycling, coloration efficiency, and switching rate were evaluated. Five polymers were selected to assemble solid-state EC cells in a symmetrical configuration (electrode/poly[M(salen)] film/opaque electrolyte/poly[M(salen)] film/electrode). The best EC performance was found for poly[Pd(3-Mesalen)], poly[1], with 38% of initial diffuse reflectance variation and loss of 50% after 6769 cycles. (C) 2010 The Electrochemical Society. [DOI: 10.1149/1.3457474] All rights reserved.

Flexible, transparent and self-supporting electrolyte films based on poly(trimethylene carbonate)/poly(ethylene oxide) (p(TMC/PEO) interpenetrating networks doped with LiClO(4) were prepared by the solvent casting technique. These novel solid polymer electrolyte (SPE) systems were characterized by measurements of conductivity, cyclic voltammetry, differential scanning calorimetry and thermogravimetry. The incorporation of solid electrolytes as components of electrochromic devices can offer certain operational advantages in real-world applications. In this study, all-solid-state electrochromic cells were characterized, using Prussian blue (PB) and poly-(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT) as complementary electrochromic compounds on poly(ethyleneterphthalate) (PET) coated with indium tin oxide (ITO) as flexible electrodes. Assembled devices with PET/ITO/PB/SPE/PEDOT/ITO/PET "sandwich-like" structure were assembled and successfully cycled between light and dark blue, corresponding to the additive optical transitions for PB and PEDOT electrochromic layers. The cells required long cycle times (>600 s) to reach full color switch and have modest stability towards prolonged cycling tests. The use of short duration cycling permitted the observation of changes in the coloration-bleaching performance in cells with different electrolyte compositions. (C) 2009 Elsevier Ltd. All rights reserved.

The chemistry and photochemistry of the compound 4'-iodo-8-methoxyflavylium tetrafluoroborate was studied in solvent mixtures of water and ethanol. The trans-chalcone form (0) is always the most stable species at equilibrium. In particular, for the first time, Ct and not the flavylium cation is reported as the most stable species in mixtures containing water at pH 1.0. The rate of Ct formation as a function of the water content exhibits a bell-shaped dependence, showing a maximum at approximately 50% water. These trends are explained by a slower cis-trans isomerization in ethanol relative to that in water due to the expected stabilization in polar solvents of the zwitterionic intermediate; on the other hand, the decrease in the concentration of cis-chalcone (Cc) in the pseudoequilibrium with increasing water content, gives rise to a decrease in the rate of Ct formation (k(obs)=k(real)[Cc]). The hydration reaction was found to be much more efficient when water is present in low concentrations. This result has important consequences for the interpretation of the coloring phenomena caused by anthocyanins in plants, as well as for applications of flavylium compounds in the field of optical memories.

Among the Krebs cycle components, just citrate enhances the fluorescence of a new bi(brachial) lariat aza-crown containing appended naphthalene fluorophores.

A new fluorescent macrocyclic structure (0) bearing two naphthalene units at both ends of a cyclic polyaminic chain containing two phenanthroline units was investigated with potentiometric and fluorescence (steady-state and time-resolved) techniques. The fluorescence emission spectra show the simultaneous presence of three bands: a short wavelength emission band (naphthalene monomer), a middle emission band (phenanthroline emission), and a long-wavelength band. All three bands were found to be dependent on the protonation state of the macrocyclic unit (including the polyaminic and phenanthroline structures). The existence of the long-wavelength emission band is discussed and is shown to imply that a bending movement involving the two phenanthroline units leads to excimer formation. This is determined by comparison with the excimer emission formed by intermolecular association of 1,10-phenanthroline. With ligand L1, excimer formation occurs only at pH values above 4. At very acidic pH values, the protonation of the polyamine bridges is extensive leading to a rigidity of the system that precludes the bending movement. The interaction with metal cations Zn(II) and Cu(II) was also investigated. Excimer formation is, in these situations, increased with Zn(II) and decreased with Cu(II). The long-emission band is shown to present a different wavelength maximum, depending on the metal, which can be considered as a characteristic to validate the use of ligand L1 as a sensor for a given metal.

The steady-state fluorescence emission spectra of the azacyclophanes 2,5,8,11-tetraaza[12] paracyclophane (L(1)), 2,6,9,13-tetraaza[14]paracyclophane (L(2)), 14,15,17,18-tetramethyl-2,5,8,11-tetraaza-[12]paracyclophane (L(3)) and 16,17,19,20-tetramethyl-2,6,9,13-tetraaza[14]paracyclophane (L(4)) as a function of pH have been measured. The fully protonated species of each cyclophane gives the highest fluorescence-emission quantum yield. The shapes of the titration curves have been explained by the existence of an electron-transfer quenching effect from a non-protonated amine to the benzene chromophore. This effect is greater for macrocycles in which the first deprotonated amine group is closer to the benzene. The association constants for the interaction of the four fully protonated macrocycles with K-3[Co(CN)(6)] have been measured either by potentiometry or from fluorescence-emission measurements, and increase in the order L(3) approximate to L(4) < L(1) approximate to L(2). The photoaquation quantum yields of K-3[Co(CN)(6)] have been measured in the presence of the macrocycles L(1) and L(2). and indicate that three of the CN nitrogens of the complex are involved in adduct formation with the fully protonated macrocycles, as supported by molecular modelling.

A complete study of the structural pH dependent transformations of the synthetic flavylium salt 4',7-dihydroxyflavylium chloride (DHF), occurring in aqueous solutions, including the basic region, is described. The kinetic study of the transformations occurring in acidic media (quinoidal base (A) reversible arrow flavylium cation (AH(+)) reversible arrow hemiacetal (B) reversible arrow cis-chalone (C-cis) reversible arrow trans-chalcone (C-trans)) allowed to conclude that the cis-trans isomerization is faster than the tautomerization and the hydration processes, which is unique in the anthocyanins family. Results obtained with the parent compound 4'7-dimethoxyglavylium chloride (DMF) with relevance to this study are also presented. In equilibrated basic solution the existence of acid-base equilibria involving the trans-Chalcone (C-trans) and its conjugated bases, (C-trans(-) and C-trans(2)), was detected. Freshly prepared solutions at pH >7 show also the presence of a transient species identified as the ionized quinoidal base (A(-)), which is almost completely converted into C-trans(2-) with a pH dependent rate constant.