Imidazolium-based ionic liquids (ILs) with different cation alkyl chain ([i-C5mim] or [C4mim]) and inorganic anions ([Cl−], [Tf2N−], [PF6−] and [DCA−]) were synthesized and immobilized in commercial mesoporous silica. The synthesized supported ILs (SILs) were characterized using NMR, FTIR, TGA, BET, SEM and TEM. CO2 sorption capacity, reusability and CO2/N2 selectivity were assessed by the pressure-decay technique. The effects of IL concentration, cation and anion chemical structure in CO2 sorption capacity and CO2/N2 separation performance were evaluated. Tests evidenced that the presence of branching on the cation alkyl side chain increases CO2/N2 selectivity. The immobilization of the IL [i-C5TPIm][Cl] on mesoporous silica in different concentrations (50, 20, 10 and 5 %) revealed that lower IL concentration results in higher CO2 sorption capacity. Immobilization of ILs containing fluorinated anions at low concentrations in the mesoporous silica support may promote the improvement of the CO2/N2 selectivity without interfering on CO2 sorption capacity of the original support. CO2 sorption capacity value shown by sample SIL-5 % - [i-C5TPIm][Tf2N] (79.50 ± 0.70 mg CO2  g-1) was close to the value obtained for the pristine mesoporous silica (81.70 ± 2.20 mg CO2 g-1) and the selectivity (4.30 ± 0.70) was more than twice of the one obtained for the support alone (2.32 ± 0.4). Recycle tests demonstrated that the ILs immobilized in mesoporous silica samples are stable, providing a new option to be used in CO2 capture processes.

Fast, real-time detection of gases and volatile organic compounds (VOCs) is
an emerging research field relevant to most aspects of modern society, from
households to health facilities, industrial units, and military environments.
Sensor features such as high sensitivity, selectivity, fast response, and low
energy consumption are essential. Liquid crystal (LC)-based sensors fulfill
these requirements due to their chemical diversity, inherent self-assembly
potential, and reversible molecular order, resulting in tunable stimuliresponsive soft materials. Sensing platforms utilizing thermotropic uniaxial
systems—nematic and smectic—that exploit not only interfacial phenomena,
but also changes in the LC bulk, are demonstrated. Special focus is given to
the different interaction mechanisms and tuned selectivity toward gas and
VOC analytes. Furthermore, the different experimental methods used to
transduce the presence of chemical analytes into macroscopic signals are discussed and detailed examples are provided. Future perspectives and trends
in the field, in particular the opportunities for LC-based advanced materials in
artificial olfaction, are also discussed.

Porous carbons from digestate-derived hydrochar were produced, characterized and their performance to reclaim phosphate from water was evaluated as a preliminary approach to demonstrate their practical application. In a first step, the digestate was converted into hydrochars through hydrothermal carbonization by using two different pH conditions: 8.3 (native conditions) and 3.0 (addition of H2SO4). The resulting hydrochars did not present significant differences. Consecutively, the hydrochars were activated with KOH to produce activated carbons with enhanced textural properties. The resulting porous carbons presented marked differences: the AC native presented a lower ash content (20.3 wt%) and a higher surface area (SBET = 1106 m2/g) when compared with the AC-H2SO4 (ash content = 43.7 wt% SBET = 503 m2/g). Phosphorus, as phosphate, is a resource present in significative amount in wastewater, causing serious problems of eutrophication. Therefore, the performance of the porous carbons samples to recover phosphate – P(PO43−) – from water was evaluated through exploitation assays that included kinetic studies. The lumped model presented a good fitting to the kinetic data and the obtained uptake capacities were the same for both carbons, 12 mg P(PO43−)/g carbon. Despite the poorer textural properties of AC-H2SO4, this carbon was richer in Ca, Al, Fe, K, and Mg cations which promoted the formation of mineral complexes with phosphate anions. The results obtained in this work are promising for the future development of P(PO43−) enriched carbons that can be used thereafter as biofertilizers in soil amendment applications.

Hydroxypropylcellulose (HPC) is an important cellulose derivative that has been widely studied due to its water-solubility, biocompatibility and biodegradability, but even more significant due to its ability to form liquid crystalline phases. HPC is able to form, under certain conditions, chiral nematic (cholesteric) structures in water solutions. Previous work confirmed that films prepared from liquid crystalline HPC/water solutions (LC-HPC) gave rise to anisotropic networks, with similar mechanical and optical characteristics of Liquid Crystalline Elastomers (LCE), capable to respond to humidity. It was also demonstrated that the incorporation of carbon nanotubes (CNTs) significantly improved the actuator responsiveness. In the work presented herein, we investigate how the incorporation of carbon nanotubes affects the flow behavior of LC-HPC solutions, and thus the structure-properties relationship, through a detailed Rheo-NMR study. As observed from the results, when shearing the samples, the degree of order reached (maximum quadrupolar peak splitting) by LC-HPC solutions increases with CNT content. Regarding the subsequent relaxation process, only the incorporation of 0.01 wt% of CNTs (lowest content) contributes to a faster recovery of cholesteric structure.

The materials described in this work result from the selfassembly of liquid crystals and ionic liquids into droplets,
stabilized within a biopolymeric matrix. These systems are
extremely versatile gels, in terms of composition, and offer
potential for fine tuning of both structure and function, as
each individual component can be varied. Here, the
characterization and application of these gels as sensing thin
films in gas sensor devices is presented. The unique
supramolecular structure of the gels is explored for molecular
recognition of volatile organic compounds (VOCs) by
employing gels with distinct formulations to yield
combinatorial optical and electrical responses used in the
distinction and identification of VOCs.

n/a

The major challenge of the pharmaceutical industry is to find potential solvents for poorly water-soluble drug molecules. Ionic liquids (ILs) have attracted this industry as (co-) solvents due to their unique physicochemical and biological properties. Herein, a straightforward approach for the enhancement of water solubility of paracetamol and sodium diclofenac is presented, using new biocompatible N-acetyl amino acid N-alkyl cholinium-based ionic liquids as co-solvents (0.2 - 1 mol%). These new ionic liquids were able to increase water solubility of these drugs up to four times higher than in pure water or in an inorganic salt solution. In the presence of these ILs the drugs lipophilicity (log Kow) was not significantly changed for paracetamol, but for sodium diclofenac it was possible to decrease significantly its lipophilicity. Concerning cytotoxicity in human dermal fibroblasts it was observed that ILs did not show a significant toxicity, and were able to improve cell viability compared with the respective precursors.

A series of 2,2':6',2''-terpyridine (terpy), 2,6-di(thiazol-2-yl)pyridine (dtpy) and 2,6-di(pyrazin-2-yl)pyridine (dppy) derivatives with n-quinolyl substituents (n = 2 and 4) was used to synthesize five-coordinate complexes [CuCl2(n-quinolyl-terpy)] (1-2), [CuCl2(n-quinolyl-dtpy)] (3-4) and [CuCl2(n-quinolyl-dppy)] (5-6), respectively. The main emphasis of the research was to investigate the impact of the triimine skeleton (terpy, dtpy and dppy) and n-quinolyl pendant substituent on the antiproliferative and catalytic properties of 1-6. The obtained Cu(ii) compounds were studied as antiproliferative agents against human colorectal (HCT116) and ovarian (A2780) carcinoma, and they were used as catalysts for the oxidation of alkanes and alcohols with peroxides under mild conditions. The kinetic characteristics of the oxidizing species generated by the catalytic system Cu(ii) complex-H2O2 in CH3CN were obtained from the dependence of the alkane oxidation rate on its initial concentration. A model of competitive interaction of hydroxyl radicals with CH3CN and RH in the catalyst cavity has been proposed which is based on the simultaneous study of kinetics and selectivity in alkane oxidations.

The major challenge of the pharmaceutical industry is to find potential solvents for poorly water-soluble drug molecules. Ionic liquids (ILs) have attracted this industry as (co-) solvents due to their unique physicochemical and biological properties. Herein, a straightforward approach for the enhancement of the water solubility of paracetamol and sodium diclofenac is presented, using new biocompatible N-acetyl amino acid N-alkyl cholinium-based ionic liquids as co-solvents (0.2-1mol%). These new ionic liquids were able to increase the water solubility of these drugs up to four times that in pure water or in an inorganic salt solution. In the presence of these ILs, the drugs lipophilicity (log P was not significantly changed for paracetamol, but for sodium diclofenac it was possible to decrease significantly its lipophilicity. Concerning cytotoxicity in human dermal fibroblasts it was observed that ILs did not show a significant toxicity, and were able to improve cell viability compared with the respective precursors.

2,6-Bis(thiazol-2-yl)pyridines functionalized with 9-anthryl (L(1)), 9-phenanthryl (L(2)), and 1-pyrenyl (L(3)) groups were used for the preparation of [Pt(L(n))Cl]CF3SO3 (1-3). The constitution of the Pt(ii) complexes was determined by (1)H and (13)C NMR spectroscopy, HR-MS spectrometry, elemental analysis and X-ray analysis (for (1)). The electrochemical and photophysical properties of [Pt(L(n))Cl]CF3SO3 were compared with the behaviour of the Pt(ii) complexes with aryl-substituted 2,2':6',2''-terpyridine ligands. What is noteworthy is that the coordination ability of dtpy toward the Pt(ii) centre was investigated for the first time. All complexes were tested in vitro by MTS assay on four tumor cell lines, A2780 (ovarian carcinoma), HTC116 (colon rectal carcinoma), MCF7 (breast adenocarcinoma), and PC3 (prostate carcinoma) and on normal primary fibroblasts. Compounds (1-3) showed a dose dependent antiproliferative effect in the A2780 cell line with (3) > (2) > (1) and this loss of A2780 cell viability was due to a combination of an apoptotic cell death mechanism via mitochondria and autophagic cell death. Exposure to IC50 concentration of (2) induced an increase in the number of apoptotic nuclei and a depolarization of the mitochondrial membrane which is consistent with the induction of apoptosis while exposure to IC50 concentration of (3) showed an increase in the apoptotic nuclei with a slight hyperpolarization of the mitochondrial membrane that might indicate an initial step of apoptosis induction. The complexes (2) and (3) induce an increase in the production of intracellular ROS which is associated with the trigger of the apoptotic pathways. The ROS production was augmented by the presence of oxidants and correlated with an increase of oxygen radicals. The IC50 of (2) and (3) (4.4 muM and 2.9 muM, respectively) was similar to the IC50 of cisplatin (3.4 muM) in the A2780 cell line, which together with their low cytotoxicity in normal fibroblasts, demonstrates their potential for further studies.

Artificial olfaction is a fast-growing field aiming to mimic natural olfactory systems. Olfactory systems rely on a first step of molecular recognition in which volatile organic compounds (VOCs) bind to an array of specialized olfactory proteins. This results in electrical signals transduced to the brain where pattern recognition is performed. An efficient approach in artificial olfaction combines gas-sensitive materials with dedicated signal processing and classification tools. In this work, films of gelatin hybrid gels with a single composition that change their optical properties upon binding to VOCs were studied as gas-sensing materials in a custom-built electronic nose. The effect of films thickness was studied by acquiring signals from gelatin hybrid gel films with thicknesses between 15 and 90 μm when exposed to 11 distinct VOCs. Several features were extracted from the signals obtained and then used to implement a dedicated automatic classifier based on support vector machines for data processing. As an optical signature could be associated to each VOC, the developed algorithms classified 11 distinct VOCs with high accuracy and precision (higher than 98%), in particular when using optical signals from a single film composition with 30 μm thickness. This shows an unprecedented example of soft matter in artificial olfaction, in which a single gelatin hybrid gel, and not an array of sensing materials, can provide enough information to accurately classify VOCs with small structural and functional differences.

The use of non-destructive evaluation (NDE) techniques for assessing microstructural changes in processed materials is of particular importance as it can be used to assess, qualitatively, the integrity of any material/structure. Among the several NDE techniques available, electrical conductivity measurements using eddy currents attract great attention owing to its simplicity and reliability. In this work, the electrical conductivity profiles of friction stir processed Ti6Al4V, Cu, Pb, S355 steel and gas tungsten arc welded AISI 304 stainless steel were determined through eddy currents and four-point probe. In parallel, hardness measurements were also performed. The profiles matched well with the optical macrographs of the materials: while entering in the processed region a variation in both profiles was always observed. One particular advantage of electrical conductivity profiles over hardness was evident: it provides a better resolution of the microstructural alterations in the processed materials. Moreover, when thermomechanical processing induces microstructural changes that modify the magnetic properties of a material, eddy currents testing can be used to qualitatively determine the phase fraction in a given region of the material. A qualitative relation between electrical conductivity measurements and hardness is observed.

The demand for better cellulose solvents has driven the search for new and improved materials to enable the processing of this polysaccharide. Ionic liquids have been debated for a long time as interesting alternatives, but the molecular details on the solubilization mechanism have been a matter of controversy. Herein, for the first time, the structure and dynamics of hydroxypropylcellulose (HPC) liquid crystal solutions were probed in the presence of imidazolium ionic liquids (ILs), conjugating rheological measurements with magnetic resonance spectroscopy. This study provides a characterization of the solutions macroscopic behaviour, where the liquid crystalline (LC) properties were maintained. Using ILs with different side chain lengths, the influence of the hydrophobic IL domain in the solvation abilities of ILs towards a cellulose derived polymer was accessed, providing experimental evidence on these interactions.

Maize Cob Waste (MCW) is available worldwide in high amounts, as maize is the most produced cereal in the world. MCW is generally left in the crop fields, but due to its low biodegradability it has a negligible impact in soil fertility. Moreover, MCW can be used as substrate to balance the C/N ratio during the Anaerobic co-Digestion (AcoD) with other biodegradable substrates, and is an excellent precursor for the production of Activated Carbons (ACs). In this context, a biorefinery is theoretically discussed in the present review, based on the idea that MCW, after proper pre-treatment is valorised as precursor of ACs and as co-substrate in AcoD for biomethane generation. This paper provides an overview on different scientific and technological aspects that can be involved in the development of the proposed biorefinery; the major topics considered in this work are the following ones: (i) the most suitable pre-treatments of MCW prior to AcoD; (ii) AcoD process with regard to the critical parameters resulting from MCW pre-treatments; (iii) production of ACs using MCW as precursor, with the aim to use these ACs in biogas conditioning (H2S removal) and upgrading (biomethane production), and (iv) an overview on biogas upgrading technologies.

Human aldehyde oxidase (hAOX1) is a molybdenum enzyme with high toxicological importance, but its physiological role is still unknown. hAOX1 metabolizes different classes of xenobiotics and is one of the main drug-metabolizing enzymes in the liver, along with cytochrome P450. hAOX1 oxidizes and inactivates a large number of drug molecules and has been responsible for the failure of several phase I clinical trials. The interindividual variability of drug-metabolizing enzymes caused by single nucleotide polymorphisms (SNPs) is highly relevant in pharmaceutical treatments. In this study, we present the crystal structure of the inactive variant G1269R, revealing the first structure of a molybdenum cofactor (Moco)-free form of hAOX1. These data allowed to model, for the first time, the flexible Gate 1 that controls access to the active site. Furthermore, we inspected the thermostability of wild-type hAOX1 and hAOX1 with various SNPs (L438V, R1231H, G1269R or S1271L) by CD spectroscopy and ThermoFAD, revealing that amino acid exchanges close to the Moco site can impact protein stability up to 10 °C. These results correlated with biochemical and structural data and enhance our understanding of hAOX1 and the effect of SNPs in the gene encoding this enzyme in the human population. Enzymes Aldehyde oxidase (EC1.2.3.1); xanthine dehydrogenase (EC1.17.1.4); xanthine oxidase (EC1.1.3.2). Databases Structural data are available in the Protein Data Bank under the accession number 6Q6Q.

Two activated carbons (ACs) were prepared by physical activation of Maize Cob Waste (MCW) with CO2, during 2 and 3 h (MCW(PA)2h and MCW(PA)3h, respectively). Two other ACs were prepared by chemical activation: a) MCW(LD) – MCW was impregnated with anaerobic liquid digestate (LD) and carbonized under N2 atmosphere; and b) CAR-MCW(LD) – previously carbonized MCW was impregnated with LD and carbonized under N2 atmosphere. All ACs were fully characterized for textural and chemical properties, and then used in dynamic H2S removal assays from real biogas samples. Regarding H2S removal, the ACs that were physically activated behaved much better than the impregnated ones: MCW(PA)3h and MCW(PA)2h showed H2S uptake capacities of 15.5 and 0.65 mg g−1, respectively, while MCW(LD) and CAR-MCW(LD) showed values of 0.47 and 0.25 mg g−1, respectively. This may indicate that textural properties (surface area and microporosity) are more important than mineral content in H2S removal. Effectively, both surface area and micropore volume were much higher for the samples of MCW(PA)3h (SBET = 820 m2 g−1 and Vmicro = 0.32 cm3 g−1) and MCW(PA)2h (SBET = 630 m2 g−1 and Vmicro = 0.21 cm3 g−1) than for the ACs that were chemically activated (SBET = 38.0 m2 g−1 and Vmicro = 0.01 cm3 g−1 for MCW(LD); SBET = 8.0 m2 g−1 and Vmicro = 0.01 cm3 g−1 for CAR-MCW(LD)). High oxygen content in MCW(PA)3h favoured the catalytic oxidation reaction of H2S, promoting its removal. The use of MCW as precursor and LD as activating agent of the ACs may contribute for the integrated management of maize wastes and to diversify the applications of anaerobic digestate.

Abstract Nature has been producing cellulose since long before man walked the surface of the earth. Millions of years of natural design and testing have resulted in cellulose-based structures that are an inspiration for the production of synthetic materials based on cellulose with properties that can mimic natural designs, functions, and properties. Here, five sections describe cellulose-based materials with characteristics that are inspired by gratings that exist on the petals of the plants, structurally colored materials, helical filaments produced by plants, water-responsive materials in plants, and environmental stimuli-responsive tissues found in insects and plants. The synthetic cellulose-based materials described herein are in the form of fibers and films. Fascinating multifunctional materials are prepared from cellulose-based liquid crystals and from composite cellulosic materials that combine functionality with structural performance. Future and recent applications are outlined.

In article number 1703655, Maria H. Godinho and co-workers review cellulose and cellulose-based materials which have properties that mimic natural designs and functions. Such materials are inspired by gratings, helical filaments, structurally colored water, and stimuli-responsive materials that exist in insects and plants. Synthetic cellulose-based materials in the form of fibers and films are considered. The inside front cover shows a eurodium awn cross section, by scanning electron microscopy, displaying the helical arrangements of cellulose fibrils.

One strategy that has gained much attention in the last decades is the understanding and further mimicking of structures and behaviours found in nature, as inspiration to develop materials with additional functionalities. This review presents recent advances in stimuli-responsive gels with emphasis on functional hydrogels and microgels. The first part of the review highlights the high impact of stimuli-responsive hydrogels in materials science. From macro to micro scale, the review also collects the most recent studies on the preparation of hybrid polymeric microgels composed of a nanoparticle (able to respond to external stimuli), encapsulated or grown into a stimuli-responsive matrix (microgel). This combination gave rise to interesting multi-responsive functional microgels and paved a new path for the preparation of multi-stimuli “smart” systems. Finally, special attention is focused on a new generation of functional stimuli-responsive polymer hydrogels able to self-shape (shape-memory) and/or self-repair. This last functionality could be considered as the closing loop for smart polymeric gels.