The innovation in the employment behaviour is particularly clear in what concerns the sector composition of the employment changes: the persistent decrease of the industrial employment (even if within a framework of some recovery of the industrial product), a slight expansion in the employment on the tertiary sector, and an important growth of the employment in the construction and public works activities. We can identify then a considerable sector mutation concerning the industrial and the services sectors but also a growth of the atypical forms of employment. Portugal continues not being able to respond to the labour market needs (improvement in the education sector is critical to the catch-up process). The Portuguese cases studied point out to organisational changes supported by ICT, but not determined/induced by it. For most of the changes that were recently developed, ICT had an important role. We didn’t found explicit technological determinism in the relation between ICT and social exclusion.

At the last National Conference of Industrial Sociology in Portugal (in March 1999) was presented a paper on the topic of “foresight as a technology and employment policy instrument” (A.B. Moniz) where there was a reference to the need of development of this kind of tools and instruments. This need is clear when one should neutralize the negative effects of such policies, and could support the positive influences, especially with the main aims of improvement of quality of working life. Thus, is today possible to make a first balance of the application in Portugal of a type of foresight analysis exercise: the Delphi method. After some of the uses of this method in Portugal on the fisheries socio-economical system and on the relation between information society and employment, we present in this paper a first assessment of such experiments and present some recommendations for future uses of this foresight technique. We conclude that they must be applied within the context of socio-economical perspectives, and not only the technological ones, although they should include that dimension.

Environmental concerns over the use of fossil fuels and their resource constraints have increased the interest in generating electric energy from renewable energy sources (RES) to provide a sustainable electricity supply. A main problem of those technologies (wind or solar power generation) is that they are not constant and reliable sources of power. This results inter alia in an increased demand of energy storage technologies. Related stake holders show a big interest in the technical, economic and ecologic aspects of new emerging energy storage systems. This comes especially true for electrochemical energy storage systems as different Li-Ion batteries, Sodium Sulfur or Redox Flow batteries which can be utilized in all grid voltage levels, a wide range of grid applications as well as end user groups (e.g. private households, industry). A prospective and active Constructive Technology Assessment (CTA) can help to minimize potential mismatches, wrong investments, possible social conflicts, and environmental impacts of new energy storage technologies in an early development stage. It is insufficient to exclusively look at the operation phase to assess a technology. Such an approach can lead to misleading interpretations and can furthermore disregard social or ecological impact factors over the whole life cycle. Different energy storage technologies have to be evaluated in a prospective manner with a full integrated sustainability and life cycle approach to form a base for decision making and to support technology developers in order to allow distinctions between more or less sustainable battery technology variations. Therefore CTA is used as a scientific approach using several “neighbouring” engineering orientated disciplines e.g. Life Cycle Analysis (LCA), Social Life Cycle Assessment (SLCA) or Life Cycle Costs (LCC) and their methodologies which were initially developed for other purposes.The aim of the presented PhD Thesis is to make an economic, technological and

This article is based on the lesson presented in the scope of academy activities in the area of Sociology (at FCT-UNL). It is intended to approach the controversies concerning the relation between technology and society (technological determinism, effect on employment, importance of the social behaviours in the definition of needs for new products and equipment), and on the most recent trends (over all, since middle of the last century) in terms of technological evolution and of its social and cultural change. Finally, this subject was dedicated to the presentation of the main factors that has lead to the development of the contribution of sociology for the training and education in engineering. Thus, one intends to acquire new elements on this area of knowledge also presented in other schools of engineering of other countries (for examples, United States and Holland), and how the theoretical beddings are been developed since the beginning of 20th century on the modalities of work organization that imply a cooperation between engineering and social sciences.

Working teams in enterprise environment are considered as the most advanced forms of work organisation. This means the forms that can improve productivity quality of working life. Nevertheless, it prevails a slow development and dissemination of these advanced organisational forms in European companies. The reason for that lays in a complex linkage factors from social values to the economical pressures. But other factors are also related to the national systems of education training, to the different systems of industrial relations and technology policy.

Working teams in enterprise environment are considered as the most advanced forms of work organisation. This means the forms that can improve productivity quality of working life. Nevertheless, it prevail a slow development and dissemination of these advanced organisational forms in European companies. The reason for that lays in a complex linkage factors from social values to the economical pressures. But other factors are also related to the national systems of education training, to the different systems of industrial relations and technology policy.

This work examines a recent study that used various forecasting methods and in particular the Delphi method, to understand how the indicators were selected during the development of the prospective study. It can be concluded that the indicators in the study were selected through discussion on existing knowledge (formal and informal) and the broad consensus of the respective community, which established and confirmed the choice of indicators as the most relevant to prospectively examine the matter concerned. The technical support provided to choose certain forecasting methods as well as to choose the methods that could not be used throughout the development of the work, contributed to the strength of the list of indicators.

The scientific controversy generated around the destiny given to the fraction of hazardous industrial waste produced in Portugal and how the country dealt with this situation was the stand out point in Souselas case. Here, the dominant aspect of the analysis focused on the implementation of a solution for the treatment of hazardous industrial waste. These wastes result from industrial processes contain or are contaminated, by substances that, at certain concentrations, represent a risk to human health or to the environment. Their treatment can be done using co-incineration in existing cement factories. Having in mind the environment analysis of a controversial process, through the statements made by the different actors involved, the case of Souselas was our object of study. Initially, the actors involved in the process were identified and characterized, in terms of position, interests and / or concerns. This analysis has strengthened with the gathering of documentary elements of analysis. In a second phase the historical process was prepared. Only then, the conditions to make an interpretation of what really happened in the process were gathered, then , it was possible to identify which parts were successful and unsuccessful, and to interpret “why” these successes and failures occurred. Thus, after the identification of key variables and leverage points, a causal diagram and a schematic simulation of the behaviour of reference in case Souselas was designed. We conclude that the process of Souselas was a significant milestone with regard to social organization and spontaneous local actors in situations of opposition to central government decisions with local impact. It was also a turning point in governance according to the model of representative democracy, whose technocratic and elitist character is called into question. The Souselas case emphasized itself as a microcosm on the conflict of interests that we find at a global level heightened since the 90s and that

The study focuses on the public participation during the decision-making process of the High Speed Rail Project (popularly known as TGV) in Portugal. The study analyzes the media references on the topic and its actors in a quantitative and qualitative way from September 2008 to November 2009 anchored in the 2009 Legislatives and Local elections. The work concludes that despite the political polarization around the High Speed Rail Project, contributing to bring it to public debate, it didn’t allow for an improvement in qualitative information that could allow the emergence of an active and informed citizen participation in the debate.

Research activities at European level on the concept of new working environments offers considerable attention to the challenges of the increased competencies of people working together with automated technologies. Since the decade of 1980 the development of approaches for the humanization of work organization, and for the development of participative organizational options induced to new proposals related to the development of complex and integrated automated systems. From such parallel conceptual development emerged the concept of “anthropocentric robotic systems” and quickly it covered also other fields of automation. More recently, the debate also covers issues related to working perception of people dealing with autonomous systems (e.g. Autonomous robotics) in tasks related to production planning, to programming and to process control. In fact, today one can understand the wider use of the anthropocentrism concept of production architectures, when understanding the new quality of these systems. In this chapter the author analyses the evolution of these issues related to governance of ICT applied to manufacturing and industrial services in research programmes strengthening very much the ‘classical’ concept of anthropocentric-based systems. It is emerging a new value of the intuitive capacities and human knowledge in the optimization and flexibilization of the manufacturing processes. While this would be a pre-condition to understand the human-robot communication needs, there is also a need to take into consideration the qualitative variables in the definition and design of robotic systems, jobs and production systems.

With the emergence of a global division of labour, the internationalisation of markets and cultures, the growing power of supranational organisations and the spread of new information technologies to every field of life, it starts to appear a different kind of society, different from the industrial society, and called by many as ‘the knowledge-based economy’, emphasizing the importance of information and knowledge in many areas of work and organisation of societies. Despite the common trends of evolution, these transformations do not necessarily produce a convergence of national and regional social and economic structures, but a diversity of realities emerging from the relations between economic and political context on one hand and the companies and their strategies on the other. In this sense, which future can we expect to the knowledge economy? How can we measure it and why is it important? This paper will present some results from the European project WORKS – Work organisation and restructuring in the knowledge society (6th Framework Programme), focusing the future visions and possible future trends in different countries, sectors and industries, given empirical evidences of the case studies applied in several European countries, underling the importance of foresight exercises to design policies, prevent uncontrolled risks and anticipate alternatives, leading to different ‘knowledge economies’ and not to the ‘knowledge economy’.

A lot has been written over the last decade with regard to Toyota and the productive model associated to it (toyota-ism). And more specifically concerning the "(…) best-seller that changed the... sociological world" (Castillo, 1998: 31). But the case of Salvador Caetano’s Ovar Industrial Division (OID), that assembles Toyota light commercial vehicles in Portugal, allows us to put forward a sub-hypothesis that fits into the analysis schema proposed in the First GERPISA International Program – "In short, GERPISA members considered that the plurality of models was much a plausible hypothesis deserving testing as that of the diffusion of a unique model (…)" (Boyer, Freyssenet, 2001: 42). So we add: and within Toyota itself, is it not true that different productive models co-exist – especially when delocalised – depending, amongst other factors, on the degree of Toyota participation – in terms of capital and technology transfer – in the local company (strong or weak) and on the markets to be reached (internal or external)? If so, what work system can we expect to find in a plant that presents such peculiar characteristics as this one?

Cognitive task automation may lead to over trust, complacency and loss of the necessary work environment situation awareness. This is a major constraint in complex work organizations teamwork, ending up into an operational gap, between system developments and its understanding and usability, by operators. This document presents a summary of the main results of author’s research on operational decision processes and occupational competences, applied to the air traffic control operational reality. Introducing a human/technological complementary approach to virtual team’s conceptualisation, the results show there is a dimension to be followed in human/machine integration, which stands beyond interface design, and calls for a deeper human comprehension of technological agent’s structure and functionalities, which will, ultimately, require the development of an operational cognitive framework, where work processes and technological behaviour are integrated in professional competences, as he two faces of the same coin.

Technology Assessment (TA) considers the knowledge on (possible ou probable) technological effects in the processes of decision making and exploring potencial technological risks with secondary effects. Besides that, it is a scientific process with the aim of contributing the public and political opinion formation relative to social aspects of science and technology. That formation is done in an interactive and communicational mode. It overtakes the legitimacy and technology conflicts problems. TA is dealing with a political process either it is related with a parliamentary level decision on the introduction or limitation of new technologies, or at the level of participative processes of entities interested in the labour sphere. In this study, it is concluded that the TA processes at the level of organization of work can aim to fulfill higher levels of productivity and performance of installed equipment, or even to increase the quality of the product or the production process. That does not mean necessarily increases in income of workers and employees. That is why the participation of these actors is also so fundamental to this process.

5937

Technology assessment is essentially a systematic method used to investigate technology developments and assess their potential impacts on society. The assessment of emerging technologies, however, requires special attention. To address technologies at early stages of development, Constructive Technology Assessment (CTA) is considered to be one of the best options to bypass the Collingridge dilemma - which fundamentally states that controlling the direction of a technology’s development is very hard. Technologies at early stages of development might appear to be unorganized, chaotic and with high level of uncertainty on future paths to take. Future Oriented Technology Analysis (FTA) represents any systematic process to produce judgments about the characteristics of emerging technologies, its development pathways, and potential future impacts. Technology Assessment is considered to be one of three subjects which form the umbrella concept of FTA. The technology assessed on this project, Brain-Computer Interface (BCI) or Brain-Machine Interface (BMI) is an emerging technology. BCIs can be defined as a technology which allows for the direct communication between the brain and an external device. It is a truly direct connection, with no use of the normal output pathways of peripheral nerves and muscles, allowing for the brain to have control over objects and softwares without intermediates. As an emerging technology, BCI is at its early stages of research and thus many challenges are still ahead. Mainstream adoption is not expected in least 10 years. There are still many problems and challenges to be overcome. The real impacts of BCI will depend directly on the development of competing technologies. If there is improvement in BCI research, then the potential applications and end users could grow dramatically. The findings of this project will be of relevant importance to researchers of the technology (especially on what concerns their interactions with other stakeholders

65844

This report begins with some general information and analysis of policy and regulation that were the subjects of discussion and exchange in the policy pillar in the first phase of WORKS. The second section is a synthesis of country information on general principles and trends of policy and policy enforcement. This is followed by a summary of sector information for the sectors chosen by the qualitative pillar to be the objects of empirical analysis. The last summarises research questions and dimensions to be guidelines for carrying out case studies and capturing the relevance and effects of policy and institutions at the workplace.

This report begins with some general information and analysis of policy and regulation that were the subjects of discussion and exchange in the policy pillar in the first phase of WORKS. The second section is a synthesis of country information on general principles and trends of policy and policy enforcement. This is followed by a summary of sector information for the sectors chosen by the qualitative pillar to be the objects of empirical analysis. The last summarises research questions and dimensions to be guidelines for carrying out case studies and capturing the relevance and effects of policy and institutions at the workplace.

We are facing an era, where pressures on health costs are extremely high, and the reforms in health system are almost constant. But over time, one factor remains unchanged – Technology continues being the sustenance of health care. Manufacturers, clinicians, patients, diagnostic and therapeutic technicians, hospital managers, government leaders, among others, either in public or private sector, are increasingly demanding in the sustained seek for information that support its decisions. Those decisions are about different types of issues: if, or how the technology can be developed, whether a technology should or should not enter the market, whether to acquire and use certain technology, and so forth. Such demand is well implied in the growth and development of Health Technology Assessment (HTA). This specialised field is commonly understood according to the International Network of Agencies for Health Technology Assessment (INAHTA, 2003) as an multidisciplinary analysis and decisional field, which studies the implications of clinical, social, ethical and economic development, dissemination and use of health technologies, without neglecting its political analysis (Goodman, 2004). The political decisions made based on HTA reports should be based on scientific evidence, linking efforts between the technical, economic and political dimensions, resourcing to a participatory vision, so that we can translate the best possible decision (Novaes 2006). On the other hand, the success of these decisions depends critically on the skills of the researcher to convey wisdom and confidence in applying rules of argumentation (Grunwald, 2007). In this paper we analyse the technical and methodological aspects of HTA, seen as a tool for evaluating health procedures and techniques. And we analyse the needs for skills and qualifications development of the actors involved in this process.

We are facing an era, where pressures on health costs are extremely high, and the reforms in health system are almost constant. But over time, one factor remains unchanged – Technology continues being the sustenance of health care. Manufacturers, clinicians, patients, diagnostic and therapeutic technicians, hospital managers, government leaders, among others, either in public or private sector, are increasingly demanding in the sustained seek for information that support its decisions. Those decisions are about different types of issues: if, or how the technology can be developed, whether a technology should or should not enter the market, whether to acquire and use certain technology, and so forth. Such demand is well implied in the growth and development of Health Technology Assessment (HTA). This specialised field is commonly understood according to the International Network of Agencies for Health Technology Assessment (INAHTA, 2003) as an multidisciplinary analysis and decisional field, which studies the implications of clinical, social, ethical and economic development, dissemination and use of health technologies, without neglecting its political analysis (Goodman, 2004). The political decisions made based on HTA reports should be based on scientific evidence, linking efforts between the technical, economic and political dimensions, resourcing to a participatory vision, so that we can translate the best possible decision (Novaes 2006). On the other hand, the success of these decisions depends critically on the skills of the researcher to convey wisdom and confidence in applying rules of argumentation (Grunwald, 2007). In this paper we analyse the technical and methodological aspects of HTA, seen as a tool for evaluating health procedures and techniques. And we analyse the needs for skills and qualifications development of the actors involved in this process.

If indicators of international competitivity of the Portuguese industry reveal very strong weaknesses in the field of education and vocational training, the achievement of a solution is not based only (and should not!) in a decisive increase of investment and support in the education and training system. It seem not logical to think in that way, once normally when one tries to solve a problem that is done in the context of that same problem. Eventually there are other strategies. Which are, then, the fields where is necessary to orient the investiment to improve an industrial competitivity? To try to answer this question, we analise one of the sectors that have contributed the most for an improvement of the Portuguese economical performance, and for a true innovative process as in terms of industrial product, or in terms of manufacturing and distribution processes. Is the automotive sector where that happens, taken in its two most important sub-sectors: the one of automobile manufacturing and assembly, and the one of components manufacturing.

The design of jobs is defined and its different implications. These aspects must be taken into consideration when applied to new automated systems, once it can occur workers in-adaptations to certain type of activity and tasks. Other concepts that emerge from this are the mental workload, stress, work accidents, shift work, or the physical environment that can reveal to become determinant in the process of job design. That means also the organizational design. In this sense, the manufacturing, organizational and individual dimensions, are the most meaningful in the mentioned process of organizational design. Are analyzed different application cases of robotized systems and their social effects, mostly those that are related to the dimensions of working conditions. Are particularly analyzed the new risk situations that occur with the use of robotic systems. One concludes on the need to take into consideration qualitative variables in the definition and design of robotic cells, jobs and production systems. This consideration influences directly in the labor productivity, in such way that the development of these methodologies of analysis can be considered as integrating the processes of technological innovation in manufacturing.

One can assist to significant changes in the organisation of manufacturing systems during the last years. Lean production, network enterprise or the virtual enterprises are reference concepts of the re-organisation of manufacturing systems. Some authors mention a new enterprise paradigm, of generalisation of intelligent manufacture, organised in networks and assisted by information and communication technologies. The first part of the paper develops a critical approach to the illusion connected to these concepts, calling the attention to the diversity of the type of relationships among firms. If virtual enterprises (VE) are networks of firms with intensive usage of ICT, one can verify a predominance of a technicist perspective. This one considers that the development of VEs is a technological problem, of development and management of information systems, and of entrepreneurial share of different databases. Sociology can be useful, even fundamental in an anthropocentric approach. The last part of the paper is on the Portuguese situation in the automobile sector, approaching the types of entrepreneurial organisation.

Recent studies continue to indicate the existence of a narrow relationship between flexible work organizations and the economic growth, in particular, Sweden and Germany. The measure of this relationship is many times the result of the value added per worker. Therefore, the causes of economic growth must be perceived from the interior of the company (work organization, technology, infrastructures, product design). On the other hand, the capacity of innovation can be perceived by the market through new products and services, and still significant changes with the introduction of new equipment and design of an efficient work organization. In this article it is analyzed the evolution of the productivity and employment levels in Portugal and other European countries, over all, during the decade of 90. An analysis for sector is made still. One verifies often that economic growth can be without employment growth. However, the growth can be obtained when if it reaches bigger added value and the efficiency can be verified when there are diminished costs for a same period of time, although that the labor productivity is also the pointer of the quality of life in a economy, therefore it represents the value produced by the work. Moreover, the total factors productivity is the measure of the technological and organizational progress (don’t includes only the technological investments). It is tried to get and to analyze the available statistics on these dimension in Portugal, concluding that Portugal presents an enterprise structure predominantly based on small and very small companies, a great number of which is market by a weak potential of adaptability, innovation and sustainability. It becomes urgent to take the non-material factors that integrate the productivity dimension, as factors of intervention for a benchmarking that allows a process of sustainable growth.