No abstract is available for this item.

No abstract is available for this item.

No abstract is available for this item.

The increasing presence of Li-Ion batteries (LIB) in mobile and stationary energy storage applications has triggered a growing interest in the environmental impacts associated with their production. Numerous studies on the potential environmental impacts of LIB production and LIB-based electric mobility are available, but these are very heterogeneous and the results are therefore difficult to compare. Furthermore, the source of inventory data, which is key to the outcome of any study, is often difficult to trace back. This paper provides a review of LCA studies on Li-Ion batteries, with a focus on the battery production process. All available original studies that explicitly assess LIB production are summarized, the sources of inventory data are traced back and the main assumptions are extracted in order to provide a quick overview of the technical key parameters used in each study. These key parameters are then compared with actual battery data from industry and research institutions. Based on the results from the reviewed studies, average values for the environmental impacts of LIB production are calculated and the relevance of different assumptions for the outcomes of the different studies is pointed out. On average, producing 1 Wh of storage capacity is associated with a cumulative energy demand of 328 Wh and causes greenhouse gas (GHG) emissions of 110 gCO2eq. Although the majority of existing studies focus on GHG emissions or energy demand, it can be shown that impacts in other categories such as toxicity might be even more important. Taking into account the importance of key parameters for the environmental performance of Li-Ion batteries, research efforts should not only focus on energy density but also on maximizing cycle life and charge-discharge efficiency.

The last decades have shown an increasing amount of research into expectations of science and technology. Especially for emerging technologies, expectations held by different stakeholder are guiding the direction of research and development. In this article the results of an investigation into the expectations of specific actors regarding the development of emerging battery technology for applications in the power grid are presented. It is set up as an explorative study within the framework of Constructive Technology Assessment (CTA). A number of studies since the 1990s have indicated a growing need for energy storage options in the power grid, where batteries appear to be capable of providing a range of valuable services to the grid. Cost-effectiveness on a large scale will however require considerable technical improvements. The configuration of energy storage may differ in the specific location and exploitation of the storage assets, as well as in the investments in new storage capacity. In this study the visions and expectations of several relevant actors are analysed using interviews and surveys in terms of expectations of technological development, expectations concerning stakeholder roles, and channels of interaction between the relevant actors. The results indicate a divide in expectations between the user side of the technology (the electric power industry) and the development side (academic researchers). Opinions differ with respect to the obstacles to technological development, the actors relevant in early technological development, and the most suitable channels for interaction between these actors. It follows from the theoretical background that conflicts in expectations provide the opportunity for the acceleration of technological development and adoption through stakeholder participation. Small interactive workshops, where conflicts identified in this paper are discussed, were identified as a suitable channel in order to reach consensus in visions and expectations for battery technology.

The foresight and scenario building methods can be an interesting reference for social sciences, especially in terms of innovative methods for labour process analysis. A scenario – as a central concept for the prospective analysis – can be considered as a rich and detailed portrait of a plausible future world. It can be a useful tool for policy-makers to grasp problems clearly and comprehensively, and to better pinpoint challenges as well as opportunities in an overall framework. The features of the foresight methods are being used in some labour policy making experiences. Case studies developed in Portugal will be presented, and some conclusions will be drawn in order to organise a set of principles for foresight analysis applied to the European project WORKS on the work organisation re-structuring in the knowledge society, and on the work design methods for new management structures of virtual organisations.

The 2nd International Conference on "Foresight Studies on Work in the Knowledge Society" was organised by IET, the Research Centre on Enterprise and Work Innovation, at the Faculty of Sciences and Technology of "Universidade Nova de Lisboa" (FCT-UNL), and took place on January 26 and 27 of 2009 with the support of the European project WORKS-Work Organisation Re-structuring in the Knowledge Society (financed by the European Commission, and co-ordinated by HIVA Leuven)

WORKS final conference report

The social dimension of worker-robot interaction in industry is becoming a decisive aspect of robotics development. Many problems and difficulties of robotics research are not only related to technical issues but framed by social aspects. Human-robot interaction (HRI) as a specific research field of robotics tackles this issue. The debate on social involvement in HRI design of a few decades ago must be re-opened. A start-up project was initiated in 2012 at Karlsruhe Institute of Technology (KIT) to define a new research field and establish a conceptual framework on HRI. It was related to recent developments in the manufacturing industry and professional service robotics. The aim was to cooperate with other research teams to establish an expert network in this field. Special focus was placed on the design of work organisation models and issues of robotics technology design for worker (or operator) and robot interaction. In the current paper we present the most important conclusions from these research activities. –

On 19 and 20 October 2006, the Research Centre on Enterprise and Work Organisation (IET) organised the first international conference on “Foresight Studies on Work in the Knowledge Society”. It took place at the auditorium of the new Library of FCT-UNL and had the support of the research project “CodeWork@VO” (financed by FCT-MCTES and co-ordinated by INESC, Porto). The conference related to the European research project “Work Organisation and Restructuring in the Knowledge Society” (WORKS), which is financed by the European Commission. The main objective of the conference was to analyse and discuss research findings on the trends of work structures in the knowledge society, and to debate on new work organisation models and new forms of work supported by ICT.

The WORKS Project started two years ago (2005), involving the efforts of research institutes of 13 European countries with the main purpose of improving the understanding of the major changes in work in the knowledge-based society, taking account both of global forces and the regional diversity within Europe. This research meeting in Sofia (Bulgaria) aimed to present synthetically the massive amount of data collected in the case studies (occupational and organisational) and with the quantitative research during last year.

If the question is whether there is a parliamentary technology assessment (PTA) unit in Portugal or Spain, the clear answer is that there is still no such unit at the central state level at the present time, neither in Portugal nor in Spain. The question then has to be modified addressing previous and current efforts to establish PTA and the current framework conditions and opportunities. Practices of PTA are framed here as a democratic innovation in the context of changes in representative democracies. Against this backdrop, the efforts and opportunities to establish PTA in Spain and Portugal are studied. By sketching these developments and outlining the opportunities in these countries, our aim is to contribute to the debate about the likelihood of a new wave of PTA in Europe (Hennen/Nierling 2014).

The aim of the TeleRisk Project on labour relations and professional risks within the context of teleworking in Portugal – supported by IDICT – Institute for Development and Inspection of Working Conditions (Ministry of Labour), is to study the practices and forms of teleworking in the manufacturing sectors in Portugal. The project chose also the software industry as a reference sector, even though it does not intend to exclude from the study any other sector of activity or the so-called “hybrid” forms of work. However, the latter must have some of the characteristics of telework. The project thus takes into account the so-called “traditional” sectors of activity, namely textile and machinery and metal engineering (machinery and equipment), not usually associated to this type of work. However, telework could include, in the so-called “traditional” sectors, other variations that are not found in technologically based sectors. One of the evaluation methods for the dynamics associated to telework consisted in carrying out surveys by means of questionnaires, aimed at employers in the sectors analysed. This paper presents some of the results of those surveys. It is important to mention that, being a preliminary analysis, it means that it does not pretend to have exhausted all the issues in the survey, but has meant that it shows the bigger tendencies, in terms of teleworking practices, of the Portuguese industry.

The focus of the following article is on the use of new robotic systems in the manufacturing industry with respect to the social dimension. Since “intuitive” human–machine interaction (HMI) in robotic systems becomes a significant objective of technical progress, new models of work organization are needed. This hypothesis will be investigated through the following two aims: The first aim is to identify relevant research questions related to the potential use of robotic systems in different systems of work organization at the manufacturing shop-floor level. The second aim is to discuss the conceptualization of (old) organizational problems of human–robot interaction (HRI). In this context, the article reflects on the limits of cognitive and perceptual workload for robot operators in complex working systems. This will be particularly relevant whenever more robots with different “roles” are to be increasingly used in the manufacturing industry. The integration of such complex socio-technical systems needs further empirical and conceptual research with regard to “social” aspects of the technical dimension. Future research should, therefore, also integrate economic and societal issues to understand the full dimensions of new human–robot interaction in industry today.

The project started in 2009 with the support of DAAD in Germany and CRUP in Portugal under the “Collaborative German-Portuguese University Actions” programme. One central goal is the further development of a theory of technology assessment applied to robotics and autonomous systems in general that reflects in its methodology the changing conditions of knowledge production in modern societies and the emergence of new robotic technologies and of associated disruptive changes. Relevant topics here are handling broadened future horizons and new clusters of science and technology (medicine, engineering, interfaces, industrial automation, micro-devices, security and safety), as well as new governance structures in policy decision making concerning research and development (R&D).

In this paper will be discussed different types of scenarios and the aims for using scenarios. Normaly they are being used by organisations due to the need to anticipate processes, to support policy-making and to understand the complexities of relations. Such organisations can be private companies, R&D organisations and networks of organisations, or even by some public administration institutions. Some cases will be discussed as the methods for ongoing scenario-building process (Shell Internacional). Scenarios should anticipate possible relations among social actors as in the Triple Helix Model, and is possible to develop strategic intelligence in the innovation process that would enable the construction of scenarios. Such processes can be assessed. The focus will be made in relation to the steps chosen for the WORKS scenarios. In this case is there a model of work changes that can be used for foresight? Differences according to sectors were found, as well on other dimensions. Problems of assessment are analysed with specific application to the scenario construction methods.

Technology assessment (TA) had never been treated as a relevant topic within the International Sociological Association (ISA) before. The first steps towards establishing this association were taken in 1948, at the initiative of the Social Science Department of UNESCO. Its formal foundation was in 1949. The World Congress of Sociology in Japan was hopefully the beginning of continuous integration of TA into the thematic sessions within the ISA.

Technology assessment is essentially an approach, a collective of the systematic methods used to scientifically investigate the conditions for and the consequences of technology and technicising and to denote their societal evaluation. It is an investigation about the technological developments as well as an evaluation of its potential impacts on society. The assessment of emerging technologies, however, requires special attention. Brain-Computer Interface (BCI) is an emerging technology which allows for the direct communication between the brain and an external device. It is a truly direct connection, with no use of the normal output pathways of peripheral nerves and muscles, allowing for the brain to have control over objects and software without intermediates. To address these kinds of technologies at early stages of development, Constructive Technology Assessment (CTA), a member of Technology Assessment approaches, has been considered as one of the most fitting approaches. As an emerging technology, BCI is at its early stages of research and thus many challenges are still ahead. Mainstream adoption is not expected in least 10 years many challenges are yet to be overcome. Therefore, the objective of this article is to discuss and present a methodological approach to assess brain-computer interface technology considering constructive technology assessment and future oriented technology analysis as the main processes to undertake the assessment. The assessment will focus only on the non-invasive type of BCI and for medical applications in three defined areas: Communication & Control, Motor Substitution and Motor Recovery for a time horizon of 10 years, 2022. These areas were chosen based on the capability of BCI to serve as a replacement of normal neuromuscular pathways. That makes it one of the best technologies to help people in activating and controlling assistive technologies which enable communication and control of the environment. However, the real impacts o

The paper examines change processes und future perspectives in the knowledge society. It presents the clothing and textile industry as an example for a transforming industry in a global economy. The paper reviews existing future studies, which have surveyed change processes and future developments in the clothing and textile industry. Main goals of the review are the identification of changes in work and the description of the restructuring of global value chains within the clothing and textile sector. The paper also highlights major current trends, drivers of change and future prospects in this sector.