Magnetic nanobiocatalysts for tag cleavage on fusion proteins have been prepared by immobilizing
enterokinase (EK) onto iron oxide magnetic nanoparticles coated with biopolymers. Two different
chemistries have been explored for the covalent coupling of EK, namely carbodiimide (EDC coupling)
and maleimide activation (Sulfo coupling). Upon immobilization, EK initial activity lowered but EDC coupling lead to higher activity retention. Regarding the stability ofthe nanobiocatalysts,thesewere recycled
up to ten times with the greater activity losses observed in the first two cycles. The immobilized EK also
proved to cleave a control fusion protein and to greatly simplify the separation of the enzyme from the
reaction mixture.

n/a

The WW domain derived from human Yes-associated protein (hYAP65_WW) recognizes proline-rich peptides. The structural and chemical robustness of WW domains makes them appealing candidates to target and capture these peptides in affinity purification processes. In this work{,} the chemical synthesis of the hYAP65_WW domain containing a terminal cysteine for oriented coupling onto the chromatographic matrix was successfully achieved by a fragment solution condensation reaction and by incorporation of pseudoproline dipeptide units. Both strategies yielded a hYAP65_WW protein with the characteristic WW domain folding. The purified hYAP65_WW domain was immobilized in a chromatographic matrix and tested for binding to a proline-rich peptide. The adsorbent bound 92 ng of peptide per mg of support and the elution was particularly efficient when employing a low pH or an increase in salt concentration. This work sets the ground for the application of WW domains as affinity reagents towards the capture and elution of peptides and proteins rich in proline sequences.

The pH-sensitive affinity pair composed by neutravidin and iminobiotin was used to develop a multilayered Magnetic Resonance Imaging (MRI) nanoprobe responsive to the acidic pH of tumor microenvironment. The multilayer system was assembled on meso-2,3-dimercaptosuccinic acid-coated iron oxide magnetic nanoparticles (MNP), which convey negative MRI contrast enhancement properties to the nanoprobe. The outer stealth PEG-layer is altered in acidic media due to the disruption of interactions between neutravidin–iminobiotin. As a consequence, the positively charged inner layer is exposed and enhances interactions with cells. The nanoprobe uptake by HCT116 cells cultured in vitro under acidic conditions had a 2-fold increase compared to the uptake at physiological pH. The uptake difference is particularly clear in T2-weighted MRI phantoms of cells incubated with the nanoprobes at both pH conditions. This work sets the proof-of-concept of a MNP-based MRI nanoprobe targeting acidic tumor microenvironment through the use of a specific bio-recognition interaction that is pH-sensitive. This tumor targeting strategy is potentially applicable to the generality of tumors since the typical hypoxic conditions and high glycolysis rate in cancer cells create an acidic environment common to the majority of cancer types.

Many successful, recent therapies for life-threatening diseases such as cancer and rheumatoid arthritis are based on the recognition between native or genetically engineered antibodies and cell-surface receptors. Although naturally produced by the immune system, the need for antibodies with unique specificities and designed for single application, has encouraged the search for novel antibody purification strategies. The availability of these products to the end-consumer is strictly related to manufacture costs, particularly those attributed to downstream processing. Over the last decades, academia and industry have developed different types of interactions and separation techniques for antibody purification, affinity-based strategies being the most common and efficient methodologies. The affinity ligands utilized range from biological to synthetic designed molecules with enhanced resistance and stability. Despite the successes achieved, the purification “paradigm” still moves interests and efforts in the continuous demand for improved separation performances. This review will focus on recent advances and perspectives in antibody purification by affinity interactions using different techniques, with particular emphasis on affinity chromatography.

Affinity‐triggered assemblies rely on affinity interactions as the driving force to assemble physically‐crosslinked networks. WW domains are small hydrophobic proteins binding to proline‐rich peptides that are typically produced in the insoluble form. Previous works attempted the biological production of the full WW domain in tandem to generate multivalent components for affinity‐triggered hydrogels. In this work, an alternative approach was followed by engineering a 13‐mer minimal version of the WW domain that retains the ability to bind to target proline‐rich peptides. Both ligand and target peptides were produced chemically and conjugated to multivalent polyethylene glycol, yielding two components. Upon mixing, they together form soft biocompatible affinity‐triggered assemblies, stable in stem cell culture media, and displaying mechanical properties in the same order of magnitude as for those hydrogels formed with the full WW protein in tandem.

Currently most economical and technological bottlenecks in protein production are placed in the down-stream processes. With the aim of increasing the efficiency and reducing the associated costs, variousaffinity ligands have been developed. Affitins are small, yet robust and easy to produce, proteins derivedfrom the archaeal extremophilic “7 kDa DNA-binding” protein family. By means of combinatorial pro-tein engineering and ribosome display selection techniques, Affitins have shown to bind a diversity oftargets. In this work, two previously developed Affitins (anti-lysozyme and anti-IgG) were immobilizedonto magnetic particles to assess their potential for protein purification by magnetic fishing. The opti-mal lysozyme and human IgG binding conditions yielded 58 mg lysozyme/g support and 165 mg IgG/gsupport, respectively. The recovery of proteins was possible in high yield (≥95{%}) and with high purity,namely ≥95{%} and 81{%}, when recovering lysozyme from Escherichia coli supernatant and IgG from humanplasma, respectively. Static binding studies indicated affinity constants of 5.0 × 104M−1and 9.3 × 105M−1for the anti-lysozyme and anti-IgG magnetic supports. This work demonstrated that Affitins, which canbe virtually evolved for any protein of interest, can be coupled onto magnetic particles creating novelaffinity adsorbents for purification by magnetic fishing.

This work aimed at the development of targeted drug delivery systems using nanoparticles fused with antibodies. The antibody anti-human {CD8} was coupled onto {PLGA} nanoparticles, and the ability of these particles to specifically target cells expressing {CD8} was studied. The obtained particles were found to be of spherical shape exhibiting a size between 350 and 600 nm. In vitro experiments with different cellular cultures {(TE671}, {CHO} and {HEK293)} using unmodified nanoparticles containing rhodamine have shown that particles were present on their surface within 48 h of incubation. In vitro tests using {anti-CD8} conjugated nanoparticles in {CHO} cell cultures indicated that all transfected cells which express {CD8} show these particles on their surface within 1h of incubation. These results demonstrated that, in a shorter time, the produced particles can target cells expressing {CD8} on their surface which offers the ability to reduce drug side effects. The antibody-coupled nanoparticles represent a promising approach to improve the efficacy of active targeting for lymphoblastic leukaemia therapy.

Magnetic particles {(MNPs)} offer attractive possibilities in biotechnology. {MNPs} can get close to a target biological entity, as their controllable sizes range from a few nanometres up to tens of nanometres, and their surface can be modified to add affinity and specificity towards desired molecules. Additionally, they can be manipulated by an external magnetic field gradient. In this work, the study of ferric oxide {(Fe3O4)} {MNPs} with different coating agents was conducted, particularly in terms of strategies for antibody attachment at the surfaces (covalent and physical adsorption) and the effects of blocking buffer composition and incubation times on the specific and non-specific interactions observed. The considered biological model system consisted of a coating antibody (goat {IgG)}, bovine serum albumin {(BSA)} as blocking agent, and a complementary antibody labelled with {FITC} (anti-goat {IgG).} The detection of antibody binding was followed by fluorescence microscopy and the intensity of the signals quantified. The ratio between the mean grey values of negative and positive controls, as well as the maximum intensity attainable in positive controls, were considered in the evaluation of the assays efficiency. The covalent immobilization of the coating antibody was more successful as opposed to protein adsorption. For covalent immobilization, silica-coated {MNPs}, a 5% (w/v) concentration of {BSA} in the blocking buffer and incubation times of 1 h produced the best results in terms of assay sensitivity. However, when conducting the assay for incubation periods of 10 min, the fluorescence signal was reduced by 44% but the assay specificity was maintained.

A great challenge to clinical development is the delivery of chemotherapeutic agents, known to cause severe toxic effects, directly to diseased sites which increase the therapeutic index whilst minimizing off-target side effects. Antibody-conjugated nanoparticles offer great opportunities to overcome these limitations in therapeutics. They combine the advantages given by the nanoparticles with the ability to bind to their target with high affinity and improve cell penetration given by the antibodies. This specialized vehicle, that can encapsulate several chemotherapeutic agents, can be engineered to possess the desirable properties, allowing overcoming the successive physiological conditions and to cross biological barriers and reach a specific tissue or cell. Moreover, antibody-conjugated nanoparticles have shown the ability to be internalized through receptor-mediated endocytosis and accumulate in cells without being recognized by the P-glycoprotein, one of the main mediators of multi-drug resistance, resulting in an increase in the intracellular concentration of drugs. Also, progress in antibody engineering has allowed the manipulation of the basic antibody structure for raising and tailoring specificity and functionality. This review explores recent developments on active drug targeting by nanoparticles functionalized with monoclonal antibodies (polymeric micelles, liposomes and polymeric nanoparticles) and summarizes the opportunities of these targeting strategies in the therapy of serious diseases (cancer, inflammatory diseases, infectious diseases, and thrombosis).

Liquid crystals {(LCs)} are used extensively by the electronics industry as display devices. Advances in the understanding of the liquid crystalline phase and the chemistry therein lead to the development of {LC} exhibiting faster switching speed with greater twist angle. This in turn lead to the emergence of liquid crystal displays, rendering dial-and-needle based displays (such as those used in various meters) and cathode ray tubes obsolete. In this article, we review the history of {LC} and their emergence as an invaluable material for display devices and the more recent discovery of their use as sensing elements in biosensors. This new application of {LC} as tools in the development of fast and simple biosensors is envisaged to gain more importance in the foreseeable future.

Adenoviruses are important platforms for vaccine development and vectors for gene therapy, increasing the demand for high titers of purified viral preparations. Monoliths are macroporous supports regarded as ideal for the purification of macromolecular complexes, including viral particles. Although common monoliths are based on synthetic polymers as methacrylates, we explored the potential of biopolymers processed by clean technologies to produce monoliths for adenovirus purification. Such an approach enables the development of disposable and biodegradable matrices for bioprocessing. A total of 20 monoliths were produced from different biopolymers (chitosan, agarose, and dextran), employing two distinct temperatures during the freezing process (−20 °C and −80 °C). The morphological and physical properties of the structures were thoroughly characterized. The monoliths presenting higher robustness and permeability rates were further analyzed for the nonspecific binding of Adenovirus serotype 5 (Ad5) preparations. The matrices presenting lower nonspecific Ad5 binding were further functionalized with quaternary amine anion-exchange ligand glycidyltrimethylammonium chloride hydrochloride by two distinct methods, and their performance toward Ad5 purification was assessed. The monolith composed of chitosan and poly(vinyl) alcohol (50:50) prepared at −80 °C allowed 100% recovery of Ad5 particles bound to the support. This is the first report of the successful purification of adenovirus using monoliths obtained from biopolymers processed by clean technologies.

The surface modification of iron oxide magnetic nanoparticles {(MNPs)} with gum Arabic {(GA)} via adsorption and covalent coupling was studied. The adsorption of {GA} was assessed during {MNP} chemical synthesis by the co-precipitation method {(MNP\_GA)}, and after {MNP} synthesis on both bare magnetite and {MNP\_GA.} The covalent immobilization of {GA} at the surface of aldehyde-activated {(MNP\_GAAPTES)} or aminated {MNPs} {(MNP\_GAEDC)} was achieved through free terminal amino and carboxylate groups from {GA.} The presence of {GA} at the surface of the {MNPs} was confirmed by {FTIR} and by the quantification of {GA} by the bicinchoninic acid test. Results indicated that the maximum of {GA} coating was obtained for the covalent coupling of {GA} through its free carboxylate groups {(MNP\_GAEDC)}, yielding a maximum of 1.8&\#xa0;g of {GA} bound/g of dried particles. The hydrodynamic diameter of {MNPs} modified with {GA} after synthesis resulted in the lowest values, in opposition to the {MNPs} co-precipitated with {GA} which presented the tendency to form larger aggregates of up to 1&\#xa0;μm. The zeta potentials indicate the existence of negatively charged surfaces before and after {GA} coating. The potential of the {GA} coated {MNPs} for further biomolecule attachment was assessed through anchorage of a model antibody to aldehyde-functionalized {MNP\_GA} and its subsequent detection with an {FITC} labeled anti-antibody.

Chitosan-based monoliths activated by plasma technology induced the coupling of a robust biomimetic ligand, previously reported as an artificial Protein A, with high yields while minimizing the environmental impact of the procedure. Due to the high porosity, good mechanical and tunable physicochemical properties of the affinity chitosan-based monoliths, it is possible to achieve high binding capacities (150 ± 10 mg antibody per gram support), and to recover 90 ± 5% of the bound protein with 98% purity directly from cell-culture extracts. Therefore, the chitosan-based monoliths prepared by clean processes exhibit a remarkable performance for the one-step capture and recovery of pure antibodies or other biological molecules with biopharmaceutical relevance.

Iron oxide magnetic nanoparticles {(MNPs)} alone are suitable for a broad spectrum of applications, but the low stability and heterogeneous size distribution in aqueous medium represent major setbacks. These setbacks can however be reduced or diminished through the coating of {MNPs} with various polymers, especially biopolymers such as polysaccharides. Polysaccharides are biocompatible, non-toxic and renewable; in addition, they possess chemical groups that permit further functionalization of the {MNPs.} Multifunctional entities can be created through decoration with specific molecules e.g. proteins, peptides, drugs, antibodies, biomimetic ligands, transfection agents, cells, and other ligands. This development opens a whole range of applications for iron oxide nanoparticles. In this review the properties of magnetic structures composed of {MNPs} and several polysaccharides {(Agarose}, Alginate, Carrageenan, Chitosan, Dextran, Heparin, Gum Arabic, Pullulan and Starch) will be discussed, in view of their recent and future biomedical and biotechnological applications.

Aminophenyl boronic acids can form reversible covalent ester interactions with cis-diol-containing molecules, serving as a selective tool for binding glycoproteins as antibody molecules that possess oligosaccharides in both the Fv and Fc regions. In this study, amino phenyl boronic acid (APBA) magnetic particles (MPs) were applied for the magnetic separation of antibody molecules. Iron oxide MPs were firstly coated with dextran to avoid non-specific binding and then with 3-glycidyloxypropyl trimethoxysilane to allow further covalent coupling of APBA (APBA_MP). When contacted with pure protein solutions of human IgG (hIgG) and bovine serum albumin (BSA), APBA_MP bound 170 ± 10 mg hIgG g−1 MP and eluted 160 ± 5 mg hIgG g−1 MP, while binding only 15 ± 5 mg BSA g−1 MP. The affinity constant for the interaction between hIgG and APBA_MP was estimated as 4.9 × 105 M−1 (Ka) with a theoretical maximum capacity of 492 mg hIgG adsorbed g−1 MP (Qmax), whereas control particles bound a negligible amount of hIgG and presented an estimated theoretical maximum capacity of 3.1 mg hIgG adsorbed g−1 MP (Qmax). APBA_MPs were also tested for antibody purification directly from CHO cell supernatants. The particles were able to bind 98% of IgG loaded and to recover 95% of pure IgG (purity greater than 98%) at extremely mild conditions.

The purification of recombinant proteins by affinity chromatography is one of the most efficient strategies due to the high recovery yields and purity achieved. However, this is dependent on the availability of specific affinity adsorbents for each particular target protein. The diversity of proteins to be purified augments the complexity and number of specific affinity adsorbents needed, and therefore generic platforms for the purification of recombinant proteins are appealing strategies. This justifies why genetically encoded affinity tags became so popular for recombinant protein purification, as these systems only require specific ligands for the capture of the fusion protein through a pre-defined affinity tag tail. There is a wide range of available affinity pairs “tag-ligand” combining biological or structural affinity ligands with the respective binding tags. This review gives a general overview of the well-established “tag-ligand” systems available for fusion protein purification and also explores current unconventional strategies under development.

This study reports the comparison of fluorimetric techniques (fluorescence microscopy and spectrofluorimetry on a 96-well format) for the on-bead screening of combinatorial libraries of affinity ligands for chromatographic separations. Two solid-phase libraries of synthetic ligands based on distinct scaffolds were synthesized by combinatorial chemistry. The libraries comprising ligands representing different hydrophobic/hydrophilic properties and sizes were tested for binding to randomly selected biomolecules (labelled with a fluorophore). Fluorescence microscopy was revealed to be a reliable and reproducible technique for the detection of lead ligands which strongly bound the target biomolecule. Results obtained by fluorescence intensity measurements in a 96-well format were less consistent, mainly due to challenges related with the accurate dispensing of the solid support.

Metalloproteases have evolved in a vast number of biological systems, being one of the most diverse types of proteases and presenting a wide range of folds and catalytic metal ions. Given the increasing understanding of protein internal dynamics and its role in enzyme function, we are interested in assessing how the structural heterogeneity of metalloproteases translates into their dynamics. Therefore, the dynamical profile of the clan MA type protein thermolysin, derived from an Elastic Network Model of protein structure, was evaluated against those obtained from a set of experimental structures and molecular dynamics simulation trajectories. A close correspondence was obtained between modes derived from the coarse-grained model and the subspace of functionally-relevant motions observed experimentally, the later being shown to be encoded in the internal dynamics of the protein. This prompted the use of dynamics-based comparison methods that employ such coarse-grained models in a representative set of clan members, allowing for its quantitative description in terms of structural and dynamical variability. Although members show structural similarity, they nonetheless present distinct dynamical profiles, with no apparent correlation between structural and dynamical relatedness. However, previously unnoticed dynamical similarity was found between the relevant members Carboxypeptidase Pfu, Leishmanolysin, and Botulinum Neurotoxin Type A, despite sharing no structural similarity. Inspection of the respective alignments shows that dynamical similarity has a functional basis, namely the need for maintaining proper intermolecular interactions with the respective substrates. These results suggest that distinct selective pressure mechanisms act on metalloproteases at structural and dynamical levels through the course of their evolution. This work shows how new insights on metalloprotease function and evolution can be assessed with comparison schemes that incorporate information on protein dynamics. The integration of these newly developed tools, if applied to other protein families, can lead to more accurate and descriptive protein classification systems.

Gum arabic (GA) is a hydrophilic composite polysaccharide derived from exudates of Acacia senegal and Acacia seyal trees. It is biocompatible, possesses emulsifying and stabilizing properties and has been explored as coating agent of nanomaterials for biomedical applications, namely magnetic nanoparticles (MNPs). Previous studies focused on the adsorption of GA onto MNPs produced by co-precipitation methods. In this work, MNPs produced by a thermal decomposition method, known to produce uniform particles with better crystalline properties, were used for the covalent coupling of GA through its free amine groups, which increases the stability of the coating layer. The MNPs were produced by thermal decomposition of Fe(acac)3 in organic solvent and, after ligand-exchange with meso-2,3-dimercaptosuccinic acid (DMSA), GA coating was achieved by the establishment of a covalent bond between DMSA and GA moieties. Clusters of several magnetic cores entrapped in a shell of GA were obtained, with good colloidal stability and promising magnetic relaxation properties (r2/r1 ratio of 350). HCT116 colorectal carcinoma cell line was used for in vitro cytotoxicity evaluation and cell-labeling efficiency studies. We show that, upon administration at the respective IC50, GA coating enhances MNP cellular uptake by 19 times compared to particles bearing only DMSA moieties. Accordingly, in vitro MR images of cells incubated with increasing concentrations of GA-coated MNP present dose-dependent contrast enhancement. The obtained results suggest that the GA magnetic nanosystem could be used as a MRI contrast agent for cell-labeling applications. Copyright © 2015 John Wiley & Sons, Ltd.

The article presents a review of the use of cross-section and staining techniques for investigating natural organic materials (mainly proteinaceous and oil-based binders/varnishes) in painted and polychrome artworks, considering the requirements of conservation practice and routine diagnostics. The reviewed literature calls attention to the importance of using cross sections to prepare samples for optical microscopy and to different properties of embedding resins; the most appropriate instrumental conditions for optical microscopy; and the advantages and disadvantages of the most common staining techniques. A few case studies were selected to illustrate the use of autofluorescence (intrinsic fluorescence) and induced fluorescence (using specific staining tests and fluorophore-labeled antibodies) for mapping and identifying organic paint materials in cross sections. New directions of research in cross-section analyses and fluorescence-based techniques for the identification and mapping of artistic materials are presented. The complementary use of different stains on the same cross section, further exploration of intrinsic and induced fluorescence of aged versus fresh materials, and applicability of cross-section observation and staining as complementary methods for assessing the effectiveness of restoration treatments, such as cleaning and consolidation, are discussed in the last section of the article.

Electronic noses (E-noses) are devices capable of detecting and identifying Volatile Organic Compounds (VOCs) in a simple and fast method. In this work, we present the development process of an opto-electronic device based on sensing films that have unique stimuli-responsive properties, altering their optical and electrical properties, when interacting with VOCs. This interaction results in optical and electrical signals that can be collected, and further processed and analysed. Two versions of the device were designed and assembled. E-nose V1 is an optical device, and E-nose V2 is a hybrid opto-electronic device. Both E-noses architectures include a delivery system, a detection chamber, and a transduction system. After the validation of the E-nose V1 prototype, the E-nose V2 was implemented, resulting in an easy-to-handle, miniaturized and stable device. Results from E-nose V2 indicated optical signals reproducibility, and the possibility of coupling the electrical signals to the opt ical response for VOCs sensing.

Human serum albumin (HSA) in an important therapeutic agent and disease biomarker, with an increasing market demand. By proteins and drugs that bind to HSA as inspiration, a combinatorial library of 64 triazine-based ligands was rationally designed and screened for HSA binding at physiological conditions. Two triazine-based lead ligands (A3A2 and A6A5), presenting more than 50% HSA bound and high enrichment factors, were selected for further studies. Binding and elution conditions for HSA purification from human plasma were optimized for both ligands. The A6A5 adsorbent yielded a purified HSA sample with 98% purity at 100% recovery yield under mild binding and elution conditions.

The simultaneous separation and quantification of two casein peptides {(IPP}, {VPP)} presenting potent inhibitory activity of angiotensin-converting-enzyme {(ACE)} and casein in fermented milks was developed. Gradient elution was carried out at a flow-rate of 1 {mL/min}, using a mixture of two solvents. Solvent A was 0.1% {TFA} in water and solvent B was acetonitrile-water-trifluoracetic acid 95:5:0.1. The effluent was monitored by {UV} detector at 214 nm. Calibration curves were constructed in the interval of 0.01-1.0 {mg/mL} for {VPP}, 0.005-1.0 {mg/mL} for {IPP}, and 0.05-3.0 {mg/mL} for casein. R2 invariably exceeded 0.999. The detection limits were 0.004 for {VPP}, 0.002 {mg/mL} for {IPP}, and 0.02 {mg/mL} for casein. Repeatability of the method was evaluated by six consecutive injections of two standard solutions containing {VPP}, {IPP}, and casein. The {RSD} values for concentration were all below 5.08%. Recovery studies were carried out to determine the accuracy of the method. Recoveries ranged between 88 and 98.2%. The methodology was applied, not only, for the monitorization of {VPP}, {IPP}, and casein in commercial fermented milks labeled as presenting antihypertensive properties, but also, in milk with different degrees of fermentation by L. Helveticus, and in other commercial functional fermented milks, such as, those presenting cholesterol lowering properties.

extran-coated iron oxide magnetic particles modified with ligand 22/8, a protein A mimetic ligand, were prepared and assessed for IgG purification. Dextran was chosen as the agent to modify the surface of magnetic particles by presenting a negligible level of nonspecific adsorption. For the functionalization of the particles with the affinity ligand toward antibodies, three methods have been explored. The optimum coupling method yielded a theoretical maximum capacity for human IgG calculated as 568 ± 33 mg/g and a binding affinity constant of 7.7 × 104 M–1. Regeneration, recycle and reuse of particles was also highly successful for five cycles with minor loss of capacity. Moreover, this support presented specificity and effectiveness for IgG adsorption and elution at pH 11 directly from crude extracts with a final purity of 95% in the eluted fraction.

Artificial olfaction is a fast-growing field aiming to mimic natural olfactory systems. Olfactory systems rely on a first step of molecular recognition in which volatile organic compounds (VOCs) bind to an array of specialized olfactory proteins. This results in electrical signals transduced to the brain where pattern recognition is performed. An efficient approach in artificial olfaction combines gas-sensitive materials with dedicated signal processing and classification tools. In this work, films of gelatin hybrid gels with a single composition that change their optical properties upon binding to VOCs were studied as gas-sensing materials in a custom-built electronic nose. The effect of films thickness was studied by acquiring signals from gelatin hybrid gel films with thicknesses between 15 and 90 μm when exposed to 11 distinct VOCs. Several features were extracted from the signals obtained and then used to implement a dedicated automatic classifier based on support vector machines for data processing. As an optical signature could be associated to each VOC, the developed algorithms classified 11 distinct VOCs with high accuracy and precision (higher than 98%), in particular when using optical signals from a single film composition with 30 μm thickness. This shows an unprecedented example of soft matter in artificial olfaction, in which a single gelatin hybrid gel, and not an array of sensing materials, can provide enough information to accurately classify VOCs with small structural and functional differences.

Oleic acid coated iron oxide nanoparticles synthesized by thermal decomposition in organic medium are highly monodisperse but at the same time are unsuitable for biological applications. Ligand-exchange reactions are useful to make their surface hydrophilic. However, these could alter some structural and magnetic properties of the modified particles. Here we present a comprehensive study and comparison of the effects of employing either citric acid (CA) or meso-2,3-dimercaptosuccinic acid (DMSA) ligand-exchange protocols for phase transfer of monodisperse hydrophobic iron oxide nanoparticles produced by thermal decomposition of Fe(acac)3 in benzyl ether. We show the excellent hydrodynamic size distribution and colloidal stability of the hydrophilic particles obtained by the two protocols and confirm that there is a certain degree of oxidation caused by the ligand-exchange. CA revealed to be more aggressive towards the iron oxide surface than DMSA and greatly reduced the saturation magnetization values and initial susceptibility of the resulting particles compared to the native ones. Besides being milder and more straightforward to perform, the DMSA ligand exchange protocol produces MNP chemically more versatile for further functionalization possibilities. This versatility is shown through the covalent linkage of gum Arabic onto MNP-DMSA using carboxyl and thiol based chemical routes and yielding particles with comparable properties.

Industrial and urban activities yield large amounts of contaminated groundwater, which present a major health issue worldwide. Infectious diseases are the most common health risk associated with drinking-water and wastewater remediation is a major concern of our modern society. The field of wastewater treatment is being revolutionized by new nano-scale water disinfection devices which outperform most currently available technologies. In particular, iron oxide magnetic nanoparticles (MNPs) have been widely used in environmental applications due to their unique physical–chemical properties. In this work, poly(ethylene) glycol (PEG)-coated MNPs have been functionalized with (RW)3, an antimicrobial peptide, to yield a novel magnetic-responsive support with antimicrobial activity against Escherichia coli K-12 DSM498 and Bacillus subtilis 168. The magnetic-responsive antimicrobial device showed to be able to successfully disinfect the surrounding solution. Using a rapid high-throughput screening platform, the minimal inhibitory concentration (MIC) was determined to be 500 μM for both strains with a visible bactericidal effect.

FucoPol, a fucose-containing extracellular polysaccharide (EPS) produced by bacterium Enterobacter A47 using glycerol as the carbon source, was employed as a coating material for magnetic particles (MPs), which were subsequently functionalized with an artificial ligand for the capture of antibodies. The performance of the modified MPs (MP–EPS-22/8) for antibody purification was investigated using direct magnetic separation alone or combined with an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and dextran. In direct magnetic capturing, and using pure protein solutions of human immunoglobulin G (hIgG) and bovine serum albumin (BSA), MP–EPS-22/8 bound 120 mg hIgG g−1 MPs, whereas with BSA only 10 ± 2 mg BSA g−1 MPs was achieved. The hybrid process combining both the ATPS and magnetic capturing leads to a good performance for partitioning of hIgG in the desired phase as well as recovery by the magnetic separator. The MPs were able to bind 145 mg of hIgG g−1 of particles which is quite high when compared with direct magnetic separation. The theoretical maximum capacity was calculated to be 410 ± 15 mg hIgG adsorbed g−1 MPs with a binding affinity constant of 4.3 × 104 M−1. In multiple extraction steps, the MPs bound 92% of loaded hIgG with a final purity level of 98.5%. The MPs could easily be regenerated, recycled and re-used for five cycles with only minor loss of capacity. FucoPol coating allowed both electrostatic and hydrophobic interactions with the antibody contributing to enhance the specificity for the targeted products.

In this work we have evaluated the potential of boronic acid functionalized magnetic particles for the one-step capture of a human monoclonal antibody (mAb) from a Chinese hamster ovary (CHO) cell culture supernatant. For comparison, Protein A coated magnetic particles were also used. The most important factor influencing the overall process yield and product purity in boronic acid particles was found to be the binding pH. Basic pH values promoted higher purities while resulting in decreased yields due to the competing effects of molecules such as glucose and lactate present in the cell culture supernatant. After optimization, the particles were successfully used in a multi-cycle purification process of the mAb from the CHO feedstock. Boronic acid particles were able to achieve an average overall yield of 86% with 88% removal of CHO host cell proteins (HCP) when the binding was performed at pH 7.4, while at pH 8.5 these values were 58% and 97%, respectively. In both cases, genomic DNA removal was in excess of 97%. Comparatively, Protein A particles recorded an average overall yield of 80% and an HCP removal greater than 99%. The adsorption of the mAb to the boronic acid particles was shown to be mediated by strong affinity interactions. Overall, boronic acid based purification processes can offer a cost-effective alternative to Protein A as the direct capturing step from the mammalian cell culture.

Fluorescence microscopy and microspectrofluorometry are important tools in the characterization and identification of proteins, offering a great range of applications in conservation science. Because of their high selectivity and sensitivity, the combination of these techniques can be exploited for improved recognition and quantification of proteinaceous binders in paintings and polychromed works of art. The present article explores an analytical protocol integrating fluorescence microscopy and fluorometry for both identification and mapping of proteinaceous binders (in particular egg and glues) in paint samples. The study has been carried out on historically accurate reconstructions simulating the structure and composition of tempera and oil paints containing these binders. To assess the spatial distribution of specific proteins within the paint layers, cross-sections from the reconstructions were analyzed by fluorescence imaging after staining with an exogenous fluorophore. Reference fluorescence spectra for each layer were acquired by a multichannel spectral analyzer and compared after Gaussian deconvolution. The results obtained demonstrated the effectiveness of the integrated protocol, highlighting the potential for the use of fluorescent staining coupled with microspectrofluorometry as a routine diagnostic tool in conservation science. The current work creates a set of fully characterized reference samples for further comparison with those from actual works of art.

Marine organisms and microorganisms are a source of natural compounds with unique chemical features. These chemical properties are useful for the discovery of new functions and applications of Marine Natural Products (MNP). To extensively exploit the potential implementations of MNPs, they are gathered in chemical databases consenting their study and screening for applications of biotechnological interest. However, classification of MNPs is currently poor in generic chemical databases. The present availability of free‐access focused MNPs databases is scarce and the molecular diversity of these databases is still very low when compared to paid‐access ones. In this review paper, the current scenario of free‐access MNP databases is presented as well as the hindrances involved in their development, mainly compound dereplication. Examples and opportunities on using freely accessible MNP databases in several important areas of biotechnology are also assessed. The scope of this paper is as well to notify the latent potential of these information sources for the discovery and development of new MNPs in biotechnology, and push future efforts to develop a public domain MNP database freely available for the scientific community.

Polymer monoliths are an efficient platform for antibody purification. The use of monoclonal antibodies (mAbs) and engineered antibody structures as therapeutics has increased exponentially over the past few decades. Several approaches use polymer monoliths to purify large quantities of antibody with defined clinical and performance requirements. Functional monolithic supports have attracted a great deal of attention as they offer practical advantages for antibody purification, such as more rapid analysis, smaller sample volume requirements and the opportunity for a greater target molecule enrichment. This review focuses on the development of synthetic and natural polymer-based monoliths for antibody purification. The materials and methods employed in monolith production are discussed, highlighting the properties of each system. We also review the structural characterization techniques available using monolithic systems and their performance under different chromatographic approaches to antibody capture and release. Finally, a summary of monolithic platforms developed for antibody separation is presented, as well as expected trends in research to solve current and future challenges in this field. This review comprises a comprehensive analysis of proposed solutions highlighting the remarkable potential of monolithic platforms.

Affinity purification is one of the most powerful separation techniques extensively employed both at laboratory and production scales. While antibodies still represent the gold standard affinity reagents, others derived from non-immunoglobulin scaffolds emerged as interesting alternatives in particular for affinity purification. The lower costs of production, fast ligand development and high robustness are appealing advantages of non-immunoglobulin scaffolds. These have successfully been used in the affinity purification of relevant targets as antibodies, human serum albumin, transferrin and other biomarkers, as reviewed in this work. Furthermore, a critical assessment on the strengths, weaknesses, opportunities and threats related with the implementation of non-immunoglobulin scaffolds as ligands in affinity purification are discussed. This article is protected by copyright. All rights reserved.

A novel magnetic support based on gum Arabic {(GA)} coated iron oxide magnetic nanoparticles {(MNP)} has been endowed with affinity properties towards immunoglobulin G {(IgG)} molecules. The success of the in situ triazine ligand synthesis was confirmed by fluorescence assays. Two synthetic ligands previously developed for binding to {IgG}, named as ligand 22/8 (artificial Protein A) and ligand 8/7 (artificial Protein L) were immobilized on to {MNPs} coated with {GA} {(MNP\_GA).} The dimension of the particles core was not affected by the surface functionalization with {GA} and triazine ligands. The hydrodynamic diameters of the magnetic supports indicate that the coupling of {GA} leads to the formation of larger agglomerates of particles with about 1 microm, but the introduction of the triazine ligands leads to a decrease on {MNPs} size. The non-functionalized {MNP\_GA} bound 28 mg {IgG/g}, two times less than bare {MNP} (60 mg {IgG/g).} {MNP\_GA} modified with ligand 22/8 bound 133 mg {IgG/g} support, twice higher than the value obtained for ligand 8/7 magnetic adsorbents (65 mg/g). Supports modified with ligand 22/8 were selected to study the adsorption and the elution of {IgG.} The adsorption of human {IgG} on this support followed a Langmuir behavior with a Q(máx) of 344 mg {IgG/g} support and K(a) of 1.5 x 10(5) M. The studies on different elution conditions indicated that although the 0.05 M citrate buffer {(pH} 3) presented good recovery yields (elution 64% of bound protein), there was occurrence of iron leaching at this acidic {pH.} Therefore, a potential alternative would be to elute bound protein with a 0.05 M {glycine-NaOH} {(pH} 11) buffer.

In the last decades, the advent of nanotechnology has driven the study and application of nanoscale versions of magnetic materials. Among the various nanoparticles under research, iron oxide magnetic nanoparticles (MNP), namely iron oxides magnetite (Fe3O4) and maghemite (γ-Fe2O3), have attracted particular interest due to their superparamagnetism, biocompatibility and biodegradability. MNP are thus ideal platforms to work on a cellular and molecular level in several biomedical applications. In particular, the use of MNP as contrast agents for biomedical imaging through Magnetic Resonance Imaging (MRI) has been explored extensively in the last 30 years, taking advantage of the versatility of MNP functionalization due to the available large surface-to-volume ratio. Polymers, either synthetic or natural, are the most common class of materials employed as coatings for MNP, allowing to customize nanoprobes properties such as size, shape, magnetic relaxation, as well as cell-nanoprobe interactions (for example, specificity towards tissue types, responsiveness to cellular environment features), therapeutic effects or combination with other imaging modalities. While most biopolymers have intrinsic biocompatibility and biodegradability properties and are greener products, synthetic polymers offer engineering versatility and possibility of being tailor-made with specific properties. This review covers the properties of nanoscale iron oxides, production and stabilization methods of such nanoparticles, and their biomedical applications, mainly focusing on the engineering of polymeric-MNP assemblies towards the development of new hybrid magnetic-polymeric MRI nanoprobes.

Monoliths represent powerful platforms for isolation of large molecules with high added value. This work presents a hybrid approach for antibody (Ab) capture and release. Using mostly natural polymers and clean processes, it is possible to create macroporous monoliths with well-defined porous networks, tuneable mechanical properties, and easy functionalization with a biomimetic ligand specific for Ab. Magnetic nanoparticles (MNPs) are embedded on the monolith network to confer a controlled magnetic response that facilitates and accelerates Ab recovery in the elution step. The hybrid monolithic systems prepared with agarose or chitosan/poly(vinyl alcohol) (PVA) blends exhibit promising binding capacities of Abs directly from cell-culture extracts (120 ± 10 mg Ab g−1 support) and controlled Ab magnetically-assisted elution yielding 95 ± 2% recovery. Moreover, a selective capture of mAbs directly from cell culture extracts is achieved yielding a final mAb preparation with 96% of purity.

Hydrolytic zinc enzymes are common targets for protein design. The versatility of the zinc chemistry can be combined with the usage of small protein scaffolds for biocatalytic applications. Despite this, the computational design of metal-containing proteins remains challenging due to the need to properly model protein–metal interactions. We addressed these issues by developing a computational multi-state design approach of artificial zinc hydrolases based on small protein scaffolds. The zinc-finger peptide Sp1f2 was redesigned to accommodate a catalytic zinc centre and the villin headpiece C-terminal subdomain HP35 was de novo designed for metal-binding and catalytic activity. Both metallopeptides exhibited metal-induced folding (KZnP,app ≈ 2 × 105 M−1) and hydrolytic activity (k2 ≈ 0.1 M−1 s−1) towards an ester substrate. By focusing on the inherent flexibility of small proteins and their interactions with the metal ion by molecular dynamics simulations and spectroscopic studies, we identified current limitations on computational design of metalloenzymes and propose how these can be overcome by integrating information of protein–metal interactions in long time scale simulations.

Antimicrobial resistance is one of the most worrying threats to humankind with extremely high healthcare costs associated. The current technologies used in clinical microbiology to identify the bacterial agent and profile antimicrobial susceptibility are time‐consuming and frequently expensive. As a result, physicians prescribe empirical antimicrobial therapies. This scenario is often the cause of therapeutic failures, causing higher mortality rates and healthcare costs, as well as the emergence and spread of antibiotic resistant bacteria. As such, new technologies for rapid identification of the pathogen and antimicrobial susceptibility testing are needed. This review summarizes the current technologies, and the promising emerging and future alternatives for the identification and profiling of antimicrobial resistance bacterial agents, which are expected to revolutionize the field of clinical diagnostics.

The human Pin1 WW domain (hPin1_WW) is a 38 residue protein which specifically recognizes ligands rich in proline and phosphorylated in Ser and Thr residues. This work presents a protocol for the improved chemical synthesis and modification of this protein through automated microwave assisted synthesis combined with the incorporation of pseudoproline units in the protein sequence. After purification{,} the protein was characterized by Mass Spectrometry and Circular Dichroism spectroscopy with results comparable to the same WW domain chemically synthesized by other strategies or biologically expressed. The protein was further immobilized on a matrix and tested for the selective binding and mild elution of phosphorylated sequences at Ser{,} Thr and Tyr residues. These results suggest that hPin1_WW is a useful protein scaffold for the purification of phosphorylated species in pTyr and pSer{,} which can be easily produced and modified by chemical methods.

Background
In situ magnetic separation (ISMS) has emerged as a powerful tool to overcome process constraints such as product degradation or inhibition of target production. In the present work, an integrated ISMS process was established for the production of his-tagged single chain fragment variable (scFv) D1.3 antibodies (?D1.3?) produced by E. coli in complex media. This study investigates the impact of ISMS on the overall product yield as well as its biocompatibility with the bioprocess when metal-chelate and triazine-functionalized magnetic beads were used.

Results
Both particle systems are well suited for separation of D1.3 during cultivation. While the triazine beads did not negatively impact the bioprocess, the application of metal-chelate particles caused leakage of divalent copper ions in the medium. After the ISMS step, elevated copper concentrations above 120?mg/L in the medium negatively influenced D1.3 production. Due to the stable nature of the model protein scFv D1.3 in the biosuspension, the application of ISMS could not increase the overall D1.3 yield as was shown by simulation and experiments.

Conclusions
We could demonstrate that triazine-functionalized beads are a suitable low-cost alternative to selectively adsorb D1.3 fragments, and measured maximum loads of 0.08?g D1.3 per g of beads. Although copper-loaded metal-chelate beads did adsorb his-tagged D1.3 well during cultivation, this particle system must be optimized by minimizing metal leakage from the beads in order to avoid negative inhibitory effects on growth of the microorganisms and target production. Hereby, other types of metal chelate complexes should be tested to demonstrate biocompatibility. Such optimized particle systems can be regarded as ISMS platform technology, especially for the production of antibodies and their fragments with low stability in the medium. The proposed model can be applied to design future ISMS experiments in order to maximize the overall product yield while the amount of particles being used is minimized as well as the number of required ISMS steps.

Iron oxide magnetic nanoparticles {(MNPs)} were synthesized by the chemical co-precipitation method and coated with gum arabic {(GA)} by physical adsorption and covalent attachment. Cultures of mammalian cell lines {(HEK293}, {CHO} and {TE671)} were grown in the presence of uncoated and {GA-coated} {MNPs.} Cellular growth was followed by optical microscopy in order to assess the proportion of cells with particles, alterations in cellular density and the presence of debris. The in vitro assays demonstrated that cells from different origins are affected differently by the presence of the nanoparticles. Also, the methods followed for {GA} coating of {MNPs} endow distinct surface characteristics that probably underlie the observed differences when in contact with the cells. In general, the nanoparticles to which the {GA} was adsorbed had a smaller ability to attach to the cells' surface and to compromise the viability of the cultures. Copyright © 2010 John Wiley & Sons, Ltd.

Enhancing the selectivity of gas sensing materials towards specific volatile organic compounds (VOCs) is
challenging due to the chemical simplicity of VOCs as well as the difficulty in interfacing VOC selective
biological elements with electronic components used in the transduction process. We aimed to tune the
selectivity of gas sensing materials through the incorporation of VOC-selective peptides into gel-like gas
sensing materials. Specifically, a peptide (P1) known to discriminate single carbon deviations among benzene
and derivatives, along with two modified versions (P2 and P3), were integrated with gel compositions
containing gelatin, ionic liquid and without or with a liquid crystal component (ionogels and hybrid gels
respectively). These formulations change their electrical or optical properties upon VOC exposure, and were
tested as sensors in an in-house developed e-nose. Their ability to distinct and identify VOCs was evaluated
via a supervised machine learning classifier. Enhanced discrimination of benzene and hexane was detected
for the P1-based hybrid gel. Additionally, complementarity of the electrical and optical sensors was observed
considering that a combination of both their accuracy predictions yielded the best classification results for the
tested VOCs. This indicates that a combinatorial array in a dual-mode e-nose could provide optimal
performance and enhanced selectivity.

Laboratory studies were conducted to evaluate the interaction between bare and polymer-coated magnetic nanoparticles (MNPs) with various environmentally relevant carrying solutions including natural oceanic seawater with and without addition of algal exopolymeric substances (EPS). The MNPs were coated with three different stabilising agents, namely gum Arabic (GA-MNP), dextran (D-MNP) and carboxymethyl-dextran (CMD-MNP). The colloidal stability of the suspensions was evaluated over 48 h and we demonstrated that: (i) hydrodynamic diameters increased over time regardless of carrying solution for all MNPs except the GA-coated ones; however, the relative changes were carrying solution- and coat-dependent; (ii) polydispersity indexes of the freshly suspended MNPs are below 0.5 for all coated MNPs, unlike the much higher values obtained for the uncoated MNPs; (iii) freshly prepared MNP suspensions (both coated and uncoated) in Milli-Q (MQ) water show high colloidal stability as indicated by zeta-potential values below -30 mV, which however decrease in absolute value within 48 h for all MNPs regardless of carrying solution; (iv) EPS seems to "stabilise" the GA-coated and the CMD-coated MNPs, but not the uncoated or the D-coated MNPs, which form larger aggregates within 48 h; (v) despite this aggregation, iron (Fe)-leaching from MNPs is sustained over 48h, but remained within the range of 3-9% of the total iron-content of the initially added MNPs regardless of suspension media and capping agent. The environmental implications of our findings and biotechnological applicability of MNPs are discussed.

Ionogel are versatile materials, as they present the electrical properties of ionic liquids and also dimensional stability, since they are trapped in a solid matrix, allowing application in electronic devices such as gas sensors and electronic noses. In this work, ionogels were designed to act as a sensitive layer for the detection of volatiles in a custom-made electronic nose. Ionogels composed of gelatin and a single imidazolium ionic liquid were doped with bare and functionalized iron oxide nanoparticles, producing ionogels with adjustable target selectivity. After exposing an array of four ionogels to 12 distinct volatile organic compounds, the collected signals were analyzed by principal component analysis (PCA) and by several supervised classification methods, in order to assess the ability of the electronic nose to distinguish different volatiles, which showed accuracy above 98%.

In hybrid gels with immobilized liquid crystal
(LC) droplets, fast and unique optical texture variations are
generated when distinct volatile organic compounds (VOCs)
interact with the LC and disturb its molecular order. The
optical texture variations can be observed under a polarized
optical microscope or transduced into a signal representing the
variations of light transmitted through the LC. We show how
hybrid gels can accurately identify 11 distinct VOCs by using
deep learning to analyze optical texture variations of individual
droplets (0.93 average F1-score) and by using machine learning
to analyze 1D optical signals from multiple droplets in hybrid
gels (0.88 average F1-score)

Non-invasive and fast diagnostic tools based on volatolomics hold great promise in the control of infectious diseases. However, the tools to identify microbial volatile organic compounds (VOCs) discriminating between human pathogens are still missing. Artificial intelligence is increasingly recognised as an essential tool in health sciences. Machine learning algorithms based in support vector machines and features selection tools were here applied to find sets of microbial VOCs with pathogen-discrimination power. Studies reporting VOCs emitted by human microbial pathogens published between 1977 and 2016 were used as source data. A set of 18 VOCs is sufficient to predict the identity of 11 microbial pathogens with high accuracy (77%), and precision (62–100%). There is one set of VOCs associated with each of the 11 pathogens which can predict the presence of that pathogen in a sample with high accuracy and precision (86–90%). The implemented pathogen classification methodology supports future database updates to include new pathogen-VOC data, which will enrich the classifiers. The sets of VOCs identified potentiate the improvement of the selectivity of non-invasive infection diagnostics using artificial olfaction devices.

The potential to combine aqueous two-phase extraction (ATPE) with magnetic separation was here investigated with the aim of developing a selective non-chromatographic method for the purification of antibodies from cell culture supernatants. Aqueous two-phase systems (ATPS) composed of polyethylene glycol (PEG) and dextran were supplemented with several surface modified magnetic particles (MPs) at distinct salt concentrations. The partition of pure human IgG in the upper and lower phases as well as the amount adsorbed at the MPs surface was investigated, indicating that MPs coated with dextran and gum Arabic established the lowest amount of non-specific interactions. The binding capacity of gum arabic coated particles modified with aminophenyl boronic acid (GA-APBA-MP) was were found to be excellent in combination with the ATPS system, yielding high yields of antibody recovery (92%) and purity (98%) from cell culture supernatants. The presence of MPs in the ATPS was found to speed up phase separation (from 40 to 25 min), to consume a lower amount of MPs (half of the amount needed in magnetic fishing) and to increase the yield and purity of a mAb purified from a cell culture supernatant, when compared with ATPE or magnetic fishing processes alone.

Biomimetic ligands have emerged to overcome disadvantages inherent in biological ligands. In particular, the Ugi reaction can generate scaffolds where molecular diversity can be introduced, allowing the synthesis and screening of ligand libraries in a high-throughput manner against a variety of biological targets. Two adsorbents bearing Ugi-based synthetic ligands, coined A4C7 and A7C1, were previously developed for the selective recovery of green fluorescent protein (GFP) and RKRKRK-tagged GFP directly from Escherichia coli crude extracts. This work describes, for the first time, the in situ synthesis of Ugi-based ligands on magnetic beads and their application in the magnetic recovery of cognate proteins.

Magnetic separations are probably one of the most versatile separation processes in biotechnology as they are able to purify cells, viruses, proteins and nucleic acids directly from crude samples. The fast and gentle process in combination with its easy scale-up and automation provide unique advantages over other separation techniques. In the midst of this process are the magnetic adsorbents tailored for the envisioned target and whose complex synthesis spans over multiple fields of science. In this context, this article reviews both the synthesis and tailoring of magnetic adsorbents for bioseparations as well as their ultimate application.

Rapid, real-time, and non-invasive identification of volatile organic compounds (VOCs)
and gases is an increasingly relevant field, with applications in areas such as healthcare, agriculture,
or industry. Ideal characteristics of VOC and gas sensing devices used for artificial olfaction include
portability and affordability, low power consumption, fast response, high selectivity, and sensitivity.
Microfluidics meets all these requirements and allows for in situ operation and small sample amounts,
providing many advantages compared to conventional methods using sophisticated apparatus such
as gas chromatography and mass spectrometry. This review covers the work accomplished so far
regarding microfluidic devices for gas sensing and artificial olfaction. Systems utilizing electrical
and optical transduction, as well as several system designs engineered throughout the years are
summarized, and future perspectives in the field are discussed.

Abstract The green fluorescent protein (GFP) is a useful indicator in a broad range of applications including cell biology, gene expression and biosensing. However, its full potential is hampered by the lack of a selective, mild and low-cost purification scheme. In order to address this demand, a novel adsorbent was developed as a generic platform for the purification of \{GFP\} or \{GFP\} fusion proteins, giving \{GFP\} a dual function as reporter and purification tag. After screening a solid-phase combinatorial library of small synthetic ligands based on the Ugi-reaction, the lead ligand (A4C7) selectively recovered \{GFP\} with 94% yield and 94% purity under mild conditions and directly from Escherichia coli extracts. Adsorbents containing the ligand \{A4C7\} maintained the selectivity to recover other proteins fused to GFP. The performance of \{A4C7\} adsorbents was compared with two commercially available methods (immunoprecipitation and hydrophobic interaction chromatography), confirming the new adsorbent as a low-cost viable alternative for \{GFP\} purification.

Phosphorylation is a reversible post-translational modification of proteins that controls a plethora of cellular processes and triggers specific physiological responses, for which there is a need to develop tools to characterize phosphorylated targets efficiently. Here, a combinatorial library of triazine-based synthetic ligands comprising 64 small molecules has been rationally designed, synthesized and screened for the enrichment of phosphorylated peptides. The lead candidate (coined A8A3), composed of histidine and phenylalanine mimetic components, showed high binding capacity and selectivity for binding mono- and multi-phosphorylated peptides at pH 3. Ligand A8A3 was coupled onto both cross-linked agarose and magnetic nanoparticles, presenting higher binding capacities (100-fold higher) when immobilized on the magnetic support. The magnetic adsorbent was further screened against a tryptic digest of two phosphorylated proteins ($\alpha$- and $\beta$-caseins) and one non-phosphorylated protein (bovine serum albumin, BSA). The MALDI-TOF mass spectra of the eluted peptides allowed the identification of nine phosphopeptides, comprising both mono- and multi-phosphorylated peptides.

Affinity chromatography is a widespread technique for the enrichment and isolation of biologics, which relies on the selective and reversible interaction between affinity ligands and target molecules. Small synthetic affinity ligands are valuable alternatives due to their robustness, low cost and fast ligand development. This work reports, for the first time, the use of a sequential Petasis-Ugi multicomponent reaction to generate rationally designed solid-phase combinatorial libraries of small synthetic ligands, which can be screened for the selection of new affinity adsorbents towards biological targets. As a proof of concept, the Petasis-Ugi reaction was here employed in the discovery of affinity ligands suitable for phosphopeptide enrichment. A combinatorial library of 84 ligands was designed, synthesized on a chromatographic solid support and screened in situ for the specific binding of phosphopeptides binding human BRCA1C-terminal domains. The success of the reaction on the chromatographic matrix was confirmed by both inductively coupled plasma atomic emission spectroscopy and fluorescence microscopy. Three lead ligands were identified due to their superior performance in terms of binding capacity and selectivity towards the phosphorylated moiety on peptides, which showed the feasibility of the Petasis-Ugi reaction for affinity ligand development.

Magnetic nanocomposites are hybrid structures consisting of an iron oxide (Fe3O4 /$\gamma$-Fe2O3 ) superparamagnetic core and a coating shell which presents affi nity for a specifi c target molecule. Within the scope of phosphopeptide enrichment, the magnetic core is usually fi rst functionalized with an intermediate layer of silica or carbon to improve dispersibility and increase specifi c area, and then with an outer layer of a phosphate-affi nity material. Fe3O4 -coating materials include metal oxides, rare earth metal-based compounds, immobilized-metal ions, polymers, and many others. This chapter provides a generic overview of the different materials that can be found in literature and their advantages and drawbacks.

Protein phosphorylation is a complex and highly dynamic process involved in numerous biological events. Abnormal phosphorylation is one of the underlying mechanisms for the development of cancer and metabolic disorders. The identification and absolute quantification of specific phospho-signatures can help elucidate protein functions in signaling pathways and facilitate the development of new and personalized diagnostic and therapeutic tools. This review presents a variety of strategies currently utilized for the enrichment of phosphorylated proteins and peptides before mass spectrometry analysis during proteomic studies. The investigation of specific affinity reagents, allied to the integration of different enrichment processes, is triggering the development of more selective, rapid and cost-effective high-throughput automated platforms.

In this work, we systematically evaluated the potential of using boronic acid functionalized magnetic particles in the capturing of human immunoglobulin G under typical mammalian cell culture conditions. For comparison, Protein A coated magnetic particles were also used. The binding pH was found to significantly influence the adsorption isotherms of boronic acid particles with the higher capacities (0.216 g IgG/g support) being observed at pH 7.4. Comparatively, this value was 0.109 g IgG/g support, for Protein A particles under the same conditions. Both particles revealed very fast adsorption kinetics with more than 70% of the maximum binding capacity being achieved in a few seconds. The effect of glucose and lactate, which are known to interact with boronic acid, was evaluated. For glucose, the binding capacity was significantly influenced by the pH and decreased as pH increased. At pH 9.5, a 70% lower binding capacity was observed for glucose concentrations as low as 0.5 g/l. The effect of lactate was less pronounced and almost pH independent reaching at most 20% decrease in binding capacity. Nevertheless, the effect of both molecules was always lower at pH 7.4. The optimization of the elution conditions enabled complete recovery of bound IgG from boronic acid particles using 50mM Tris-HCl, 200 mM sorbitol, 200 mM NaCl at pH 8.5.

This paper reports the design, preparation and characterization of cellulose affinity membranes for antibody purification using a new methodology. Cellulose membranes were prepared from polymer-ionic liquid solutions, namely 1-butyl-3-methylimidazolium chloride {([BMIM][Cl])}, by the water induced phase inversion process. After functionalization with a synthetic ligand 2-(3-aminophenol)-6-(4-amino-1-naphthol)-4-chloro-s-triazine (ligand 22/8), these were evaluated as affinity supports for human immunoglobulin G {(IgG).} Membranes were characterized in terms of morphology {(SEM)}, porosity (mercury porosimetry), hydrophilicity (contact angle measurement), transport properties (permeability) and mechanical performance {(DMA).} Membranes prepared with varying cellulose contents (5 and 10&\#xa0;wt.% cellulose in ionic liquid solutions) lead to films with different properties. The 10&\#xa0;wt.% cellulose membrane presented enhanced morphological and mechanical properties, however, the morphology of this membrane was significantly altered after ligand coupling. Adsorption isotherms for human {IgG} onto 10&\#xa0;wt.% matrix activated with ligand 22/8 were obtained. Preliminary results showed that the bovine serum albumin {(BSA)}, a model impurity, did not adsorb onto the membrane while up to 6&\#xa0;mg {IgG/g} was bound and 2&\#xa0;mg {IgG/g} recovered.

Animals’ olfactory systems rely on proteins, olfactory receptors (ORs) and
odorant-binding proteins (OBPs), as their native sensing units to detect odours.
Recent advances demonstrate that these proteins can also be employed as
molecular recognition units in gas-phase biosensors. In addition, the interactions
between odorant molecules and ORs or OBPs are a source of inspiration
for designing peptides with tunable odorant selectivity. We review recent
progress in gas biosensors employing biological units (ORs, OBPs, and peptides)
in light of future developments in artificial olfaction, emphasizing examples
where biological components have been employed to detect gas-phase
analytes.

BACKGROUND The emergence of monoclonal antibodies (mAbs) as new biopharmaceutical products requires the development of new purification methods that are not only effective but are able to reduce production costs. To address the problematic recovery of mAbs, gum arabic (GA) coated magnetic particles (MPs) were used for the purification of human antibodies from animal cells supernatants. RESULTS MPs were synthesized via co-precipitation and exhibited a spherical-like physical aspect, with an average hydrodynamic diameter of 473 nm and a zeta potential of –26 mV. The adsorption and elution of IgG on these adsorbents was thoroughly studied. Adsorption of human IgG was enhanced at pH 6, for which a qmax of 244 mg IgG g−1 MPs and Kd of 25 mg L−1 were obtained. Increasing salt concentrations at a basic pH (1 mol L−1 NaCl at pH 11) were found to improve the elution of bound IgG. The MPs were challenged with an artificial protein mixture containing human IgG, albumin, insulin and apo-transferrin. An overall yield of 84% was achieved, retrieving 92% of bound IgG. CONCLUSIONS MPs were successfully used for the capture of monoclonal antibodies from two distinct mammalian cell cultures, a Chinese hamster ovary (CHO) and a hybridoma cell culture supernatants. The elution yields were high, ranging between 84% and 94%, with overall yields ranging from 72% to 88%. Final purities of 85% were reached for hybridoma cell supernatants. © 2014 Society of Chemical Industry

The current chromatographic approaches used in protein purification are not keeping pace with the increasing biopharmaceutical market demand. With the upstream improvements, the bottleneck shifted towards the downstream process. New approaches rely in Anything But Chromatography methodologies and revisiting former techniques with a bioprocess perspective. Protein crystallization and precipitation methods are already implemented in the downstream process of diverse therapeutic biological macromolecules, overcoming the current chromatographic bottlenecks. Promising work is being developed in order to implement crystallization and precipitation in the purification pipeline of high value therapeutic molecules. This review focuses in the role of these two methodologies in current industrial purification processes, and highlights their potential implementation in the purification pipeline of high value therapeutic molecules, overcoming chromatographic holdups.

n/a

Fast, real-time detection of gases and volatile organic compounds (VOCs) is
an emerging research field relevant to most aspects of modern society, from
households to health facilities, industrial units, and military environments.
Sensor features such as high sensitivity, selectivity, fast response, and low
energy consumption are essential. Liquid crystal (LC)-based sensors fulfill
these requirements due to their chemical diversity, inherent self-assembly
potential, and reversible molecular order, resulting in tunable stimuliresponsive soft materials. Sensing platforms utilizing thermotropic uniaxial
systems—nematic and smectic—that exploit not only interfacial phenomena,
but also changes in the LC bulk, are demonstrated. Special focus is given to
the different interaction mechanisms and tuned selectivity toward gas and
VOC analytes. Furthermore, the different experimental methods used to
transduce the presence of chemical analytes into macroscopic signals are discussed and detailed examples are provided. Future perspectives and trends
in the field, in particular the opportunities for LC-based advanced materials in
artificial olfaction, are also discussed.

The effect of kefir grains on the proteolysis of major milk proteins in milk kefir and in a culture of kefir grains in pasteurized cheese whey was followed by reverse {phase-HPLC} analysis. The reduction of kappa-, alpha-, and beta-caseins {(CN)}, alpha-lactalbumin {(alpha-LA)}, and beta-lactoglobulin {(beta-LG)} contents during 48 and 90 h of incubation of pasteurized milk {(100mL)} and respective cheese whey with kefir grains (6 and 12 g) at 20 degrees C was monitored. Significant proteolysis of {alpha-LA} and kappa-, alpha-, and beta-caseins was observed. The effect of kefir amount (6 and 12 {g/100mL)} was significant for {alpha-LA} and alpha- and {beta-CN.} {alpha-Lactalbumin} and {beta-CN} were more easily hydrolyzed than {alpha-CN.} No significant reduction was observed with respect to {beta-LG} concentration for 6 and 12 g of kefir in {100mL} of milk over 48 h, indicating that no significant proteolysis was carried out. Similar results were observed when the experiment was conducted over 90 h. Regarding the cheese whey kefir samples, similar behavior was observed for the proteolysis of {alpha-LA} and {beta-LG:} {alpha-LA} was hydrolyzed between 60 and 90% after 12h (for 6 and 12 g of kefir) and no significant {beta-LG} proteolysis occurred. The proteolytic activity of lactic acid bacteria and yeasts in kefir community was evaluated. Kefir milk prepared under normal conditions contained peptides from proteolysis of {alpha-LA} and kappa-, alpha-, and beta-caseins. Hydrolysis is dependent on the kefir:milk ratio and incubation time. {beta-Lactoglobulin} is not hydrolyzed even when higher hydrolysis time is used. Kefir grains are not appropriate as adjunct cultures to increase {beta-LG} digestibility in whey-based or whey-containing foods.

Retroviral vectors gained popularity toward other viral vectors as they integrate their genome into hosts' genome, a characteristic required for the modification of stem cells. However, the production of viable particles for gene therapy is hampered by the low ratio of infectious to non-infectious viral particles after purification, low titers and limited number of competent viral receptors. We have developed de novo two fully synthetic triazine-based ligands that can selectively bind retroviral particles pseudotyped with amphotropic murine leukemia virus envelope (AMPHO4070A). A 78-membered library of triazine-based ligands was designed in silico and was virtually screened against the modeled structure of the AMPHO4070A protein. Ligands displaying the highest energy of binding were synthesized on cross-linked agarose and experimentally tested. Adsorbents containing ligands A5A10 and A10A11 showed selectivity toward viral particles containing the target protein (VLP-AMPHO), binding 19 ± 5 $μ$g/g support and 47 ± 13 $μ$g/g support, respectively. The elution conditions for both ligands were mild and with high recovery yields (80-100{%}), in comparison with common purification practices. These results were based on a lab-scale experimental setting with VLP integrity being confirmed through TEM. In particular, the elution buffer containing 12 mM imidazole allowed the recovery of intact amphotropic viral particles.

Monoclonal antibodies (mAbs) are important therapeutic proteins. One of the challenges facing large-scale production of monoclonal antibodies is the capacity bottleneck in downstream processing, which can be circumvented by using magnetic stimuli-responsive polymer nanoparticles. In this work, stimuli-responsive magnetic particles composed of a magnetic poly(methyl methacrylate) core with a poly(N-isopropylacrylamide-co-acrylic acid) (P(NIPAM-co-AA)) shell cross-linked with N, N'-methylenebisacrylamide were prepared by miniemulsion polymerization. The particles were shown to have an average hydrodynamic diameter of 317 nm at 18°C, which decreased to 277 nm at 41°C due to the collapse of the thermo-responsive shell. The particles were superparamagnetic in behavior and exhibited a saturation magnetization of 12.6 emu/g. Subsequently, we evaluated the potential of these negatively charged stimuli-responsive magnetic particles in the purification of a monoclonal antibody from a diafiltered CHO cell culture supernatant by cation exchange. The adsorption of antibodies onto P(NIPAM-co-AA)-coated nanoparticles was highly selective and allowed for the recovery of approximately 94% of the mAb. Different elution strategies were employed providing highly pure mAb fractions with host cell protein (HCP) removal greater than 98%. By exploring the stimuli-responsive properties of the particles, shorter magnetic separation times were possible without significant differences in product yield and purity.

Affinity chromatography is one of the most common techniques employed at the industrial-scale for antibody purification. In particular, the purification of human immunoglobulin G (hIgG) has gained relevance with the immobilization of its natural binding counterpart—Staphylococcus aureus Protein A (SpA) or with the recent development of biomimetic affinity ligands, namely triazine-based ligands. These ligands have been developed in order to overcome economic and leaching issues associated to SpA. The most recent triazine-based ligand—TPN-BM, came up as an analogue of 2-(3-amino-phenol)-6-(4-amino-1-naphthol)-4-chloro-sym-triazine ligand also known as ligand 22/8 with improved physico-chemical properties and a greener synthetic route. This work intends to evaluate the potential of TPN-BM as an alternative affinity ligand towards antibody recognition and binding, namely IgG, at an atomic level, since it has already been tested, after immobilization onto chitosan-based monoliths and demonstrated interesting affinity behaviour for this purpose. Herein, combining automated molecular docking and molecular dynamics simulations it was predicted that TPN-BM has high propensity to bind IgG through the same binding site found in the crystallographic structure of SpA_IgG complex, as well as theoretically predicted for ligand 22/8_IgG complex. Furthermore, it was found that TPN-BM established preferential interactions with aromatic residues at the Fab domain (Trp 50, Tyr 53, Tyr 98 and Trp 100), while in the Fc domain the main interactions are based on hydrogen bonds with pH sensitive residues at operational regime for binding and elution like histidines (His 460, His 464, His 466). Moreover, the pH dependence of TPN-BM_IgG complex formation was more evident for the Fc domain, where at pH 3 the protonation state and consequently the charge alteration of histidine residues located at the IgG binding site induced ligand detachment which explains the optimal elution condition at this pH observed experimentally.

High blood pressure or hypertension is a condition affecting many individuals and represents a controllable risk factor for cardiovascular diseases such as coronary heart disease and stroke. A non-pharmacological approach to manage these includes the application of food components with antihypertensive activity. Milk protein-derived peptides have been exploited as natural hypotensive agents, namely the peptides {Val-Pro-Pro} {(VPP)} and {Ile-Pro-Pro} {(IPP)}, already commercialized in functional foods as a potential alternative to synthetic drugs. These bioactive peptides inhibit in vitro and in vivo the Angiotensin I-converting enzyme {(ACE)}, a protein with an important role in blood pressure regulation. In this work, we attempted to elucidate the possible mode of interaction between the peptides and {ACE}, including mechanisms of binding to the cofactor Zn2+, and further contrast this with the known mode of inhibition exerted by synthetic drugs {(Captopril}, Enalaprilat and Lisinopril). The bioactive peptide {Ala-Leu-Pro-Met-His-Ile-Arg} {(ALPMHIR)}, also known to inhibit the enzyme {ACE} but with a lower efficiency than {VPP} and {IPP}, was utilized in the docking studies for comparison. It was observed that the best docking poses obtained for {VPP} and {IPP} were located at the {ACE} catalytic site with very high resemblance to the drugs mode of interaction, including the coordination with Zn2+. As for {ALPMHIR}, the best docking poses were located in the narrow {ACE} channel outside the catalytic site, representing higher affinity energies and fewer resemblances with the interaction established by drugs.

The fast and non-invasive detection of odors and volatile organic compounds (VOCs) by gas sensors and electronic
noses is a growing field of interest, mostly due to a large scope of potential applications. Additional drivers for the
expansion of the field include the development of alternative and sustainable sensing materials. The discovery
that isolated cross-linked polymeric structures of suberin spontaneously self-assemble as a film inspired us to
develop new sensing composite materials consisting of suberin and a liquid crystal (LC). Due to their stimuliresponsive and optically active nature, liquid crystals are interesting probes in gas sensing. Herein, we report
the isolation and the chemical characterization of two suberin types (from cork and from potato peels) resorting to
analyses of gas chromatography–mass spectrometry (GC-MS), solution nuclear magnetic resonance (NMR), and Xray photoelectron spectroscopy (XPS). The collected data highlighted their compositional and structural differences. Cork suberin showed a higher proportion of longer aliphatic constituents and is more esterified than potato
suberin. Accordingly, when casted it formed films with larger surface irregularities and a higher C/O ratio. When
either type of suberin was combined with the liquid crystal 5CB, the ensuing hybrid materials showed distinctive
morphological and sensing properties towards a set of 12 VOCs (comprising heptane, hexane, chloroform,
toluene, dichlormethane, diethylether, ethyl acetate, acetonitrile, acetone, ethanol, methanol, and acetic acid).
The optical responses generated by the materials are reversible and reproducible, showing stability for 3 weeks.
The individual VOC-sensing responses of the two hybrid materials are discussed taking as basis the chemistry of
each suberin type. A support vector machines (SVM) algorithm based on the features of the optical responses was
implemented to assess the VOC identification ability of the materials, revealing that the two distinct suberin-based
sensors complement each other, since they selectively identify distinct VOCs or VOC groups. It is expected that
such new environmentally-friendly gas sensing materials derived from natural diversity can be combined in arrays
to enlarge selectivity and sensing capacity.

Silk fibroin is a biobased material with excellent biocompatibility and mechanical properties, but its use in bioelectronics is hampered by the difficult dissolution and low intrinsic conductivity. Some ionic liquids are known to dissolve fibroin but removed after fibroin processing. However, ionic liquids and fibroin can cooperatively give rise to functional materials, and there are untapped opportunities in this combination. The dissolution of fibroin, followed by gelation, in designer ionic liquids from the imidazolium chloride family with varied alkyl chain lengths (2–10 carbons) is shown here. The alkyl chain length of the anion has a large impact on fibroin secondary structure which adopts unconventional arrangements, yielding robust gels with distinct hierarchical organization. Furthermore, and due to their remarkable air-stability and ionic conductivity, fibroin ionogels are exploited as active electrical gas sensors in an electronic nose revealing the unravelled possibilities of fibroin in soft and flexible electronics.

Relative humidity is simultaneously a sensing target and a contaminant in gas and volatile organic compound (VOC) sensing systems, where strategies to control humidity interference are required. An unmet challenge is the creation of gas-sensitive materials where the response to humidity is controlled by the material itself. Here, humidity effects are controlled through the design of gelatin formulations in ionic liquids without and with liquid crystals as electrical and optical sensors, respectively. In this design, the anions [DCA]− and [Cl]− of room temperature ionic liquids from the 1-butyl-3-methylimidazolium family tailor the response to humidity and, subsequently, sensing of VOCs in dry and humid conditions. Due to the combined effect of the materials formulations and sensing mechanisms, changing the anion from [DCA]− to the much more hygroscopic [Cl]−, leads to stronger electrical responses and much weaker optical responses to humidity. Thus, either humidity sensors or humidity-tolerant VOC sensors that do not require sample preconditioning or signal processing to correct humidity impact are obtained. With the wide spread of 3D- and 4D-printing and intelligent devices, the monitoring and tuning of humidity in sustainable biobased materials offers excellent opportunities in e-nose sensing arrays and wearable devices compatible with operation at room conditions.

A novel affinity “tag–receptor” pair was developed as a generic platform for the purification of fusion proteins. The hexapeptide RKRKRK was selected as the affinity tag and fused to green fluorescent protein (GFP). The DNA fragments were designed, cloned in Pet-21c expression vector and expressed in E. coli host as soluble protein. A solid-phase combinatorial library based on the Ugi reaction was synthesized: 64 affinity ligands displaying complementary functionalities towards the designed tag. The library was screened by affinity chromatography in a 96-well format for binding to the RKRKRK-tagged GFP protein. Lead ligand A7C1 was selected for the purification of RKRKRK fusion proteins. The affinity pair RKRKRK-tagged GFP with A7C1 emerged as a promising solution (Ka of 2.45×105 M−1). The specificity of the ligand towards the tag was observed experimentally and theoretically through automated docking and molecular dynamics simulations.

The green fluorescent protein (GFP) is widely employed to report on a variety of molecular phenomena, but its selective recovery is hampered by the lack of a low-cost and robust purification alternative. This work reports an integrated approach combining rational design and experimental validation toward the optimization of a small fully-synthetic ligand for GFP purification. A total of 56 affinity ligands based on a first-generation lead structure were rationally designed through molecular modeling protocols. The library of ligands was further synthesized by solid-phase combinatorial methods based on the Ugi reaction and screened against Escherichia coli extracts containing GFP. Ligands A4C2, A5C5 and A5C6 emerged as the new lead structures based on the high estimated theoretical affinity constants and the high GFP binding percentages and enrichment factors. The elution of GFP from these adsorbents was further characterized, where the best compromise between mild elution conditions, yield and purity was found for ligands A5C5 and A5C6. These were tested for purifying a model GFP-fusion protein, where ligand A5C5 yielded higher protein recovery and purity. The molecular interactions between the lead ligands and GFP were further assessed by molecular dynamics simulations, showing a wide range of potential hydrophobic and hydrogen-bond interactions.

As consumption of fish and fish-based foods increases, non-destructive monitoring of fish freshness also becomes more prominent. Fish products are very perishable and prone to microbiological growth, not always easily detected by organoleptic evaluation. The analysis of the headspace of fish specimens through gas sensing is an interesting approach to monitor fish freshness. Here we report a gas sensing method for monitoring Tilapia fish spoilage based on the application of a single gas sensitive gel material coupled to an optical electronic nose. The optical signals of the sensor and the extent of bacterial growth were followed over time, and results indicated good correlation between the two determinations, which suggests the potential application of this simple and low cost system for Tilapia fish freshness monitoring.

A common strategy for the production and purification of recombinant proteins is to fuse a tag to the protein terminal residues and employ a “tag-specific” ligand for fusion protein capture and purification. In this work, we explored the effect of two tryptophan-based tags, NWNWNW and WFWFWF, on the expression and purification of Green Fluorescence Protein (GFP) used as a model fusion protein. The titers obtained with the expression of these fusion proteins in soluble form were 0.11 mg ml−1 and 0.48 mg ml−1 for WFWFWF and NWNWNW, respectively. A combinatorial library comprising 64 ligands based on the Ugi reaction was prepared and screened for binding GFP-tagged and non-tagged proteins. Complementary ligands A2C2 and A3C1 were selected for the effective capture of NWNWNW and WFWFWF tagged proteins, respectively, in soluble forms. These affinity pairs displayed 106 M−1 affinity constants and Qmax values of 19.11 ± 2.60 ug g−1 and 79.39 ug g−1 for the systems WFWFWF AND NWNWNW, respectively. GFP fused to the WFWFWF affinity tag was also produced as inclusion bodies, and a refolding-on column strategy was explored using the ligand A4C8, selected from the combinatorial library of ligands but in presence of denaturant agents.

The cooperative assembly of biopolymers and small molecules can yield functional materials with precisely tunable properties. Here, the fabrication, characterization, and use of multicomponent hybrid gels as selective gas sensors are reported. The gels are composed of liquid crystal droplets self-assembled in the presence of ionic liquids, which further coassemble with biopolymers to form stable matrices. Each individual component can be varied and acts cooperatively to tune gels' structure and function. The unique molecular environment in hybrid gels is explored for supramolecular recognition of volatile compounds. Gels with distinct compositions are used as optical and electrical gas sensors, yielding a combinatorial response conceptually mimicking olfactory biological systems, and tested to distinguish volatile organic compounds and to quantify ethanol in automotive fuel. The gel response is rapid, reversible, and reproducible. These robust, versatile, modular, pliant electro-optical soft materials possess new possibilities in sensing triggered by chemical and physical stimuli.

Affinity chromatography with protein A from Staphylococcus aureus (SpA) is the most widespread and
accepted methodology for antibody capture during the downstream process of antibody manufacturing.
A triazine based ligand (ligand 22/8) was previously developed as an inexpensive and robust alternative
to SpA chromatography (Li et al. [12] and Teng et al. [11]). Despite the experimental success, there is no
structural information on the binding modes of ligand 22/8 to antibodies, namely to Immunoglobulin G
(IgG) molecules and fragments. In this work, we addressed this issue by a molecular docking approach
allied to molecular dynamics simulations. Theoretical results confirmed the preference of the synthetic
ligand to bind IgG through the binding site found in the crystallographic structure of the natural complex
between SpA and the Fc fragment of IgG. Our studies also suggested other unknown “hot-spots” for
specific binding of the affinity ligand at the hinge between VH and CH1 domains of Fab fragment. The best
docking poses were further analysed by molecular dynamics studies at three different protonation states
(pH 3, 7 and 11). The main interactions between ligand 22/8 and the IgG fragments found at pH 7 were
weaker at pH 3 and pH 11 and in these conditions the ligand start losing tight contact with the binding
site, corroborating the experimental evidence for protein elution from the chromatographic adsorbents
at these pH conditions.

Fucopol, a fucose-containing exopolysaccharide (EPS) produced by the bacterium Enterobacter A47 DSM 23139 using glycerol as a carbon source, was employed as a new coating material for iron oxide magnetic nanoparticles (MNP). The coated particles were assessed as nanoprobes for cell labeling by Magnetic Resonance Imaging (MRI). The MNP were synthesized by a thermal decomposition method and transferred to aqueous medium by ligand-exchange reaction with meso-2,3-dimercaptosuccinic acid (DMSA). Covalent binding of EPS to DMSA-stabilized nanoparticles (MNP-DMSA) resulted in a hybrid magnetic-biopolymeric nanosystem (MNP-DMSA-EPS) with a hydrodynamic size of 170 nm, negative surface charge at physiological conditions and transverse to longitudinal relaxivities ratio, r2/r1, of 148. In vitro studies with two human cell lines (colorectal carcinoma - HCT116 - and neural stem/progenitor cells - ReNcell VM) showed that EPS promotes internalization of nanoparticles in both cell lines. In vitro MRI cell phantoms also showed superior performance of MNP-DMSA-EPS in ReNcell VM, for which iron dose-dependent MRI signal drop was obtained at relatively low iron concentrations (12 - 20 µg Fe/ml) and short incubation time. Furthermore, ReNcell VM multipotency was not affected by culture in the presence of MNP-DMSA or MNP-DMSA-EPS for 14 days. Our study suggests that Fucopol-coated MNP represent useful cell labeling nanoprobes for MRI.

We report the development of gas-sensing multicomponent hybrid materials to be used under humidified and dried environments without the need of sample preconditioning or heavy signal processing. The easy tunability and the unique characteristics presented by the multicomponent hybrid materials suggests their use in nearterm applications in electronic nose systems able to operate in dry or humidified environments.

Phosphoprotein-binding domains interact with cognate phosphorylated targets ruling several biological processes. The impairment of such interactions is often associated with disease development, namely cancer. The breast cancer susceptibility gene 1 (BRCA1) C-terminal (BRCT) domain is involved in the control of complex signaling networks of the DNA damage response. The capture and identification of BRCT-binding proteins and peptides may be used for the development of new diagnostic tools for diseases with abnormal phosphorylation profiles. Here we show that designed cyclic β-hairpin structures can be used as peptidomimetics of the BRCT domain, with high selectivity in binding to a target phosphorylated peptide. The amino acid residues and spatial constraints involved in the interaction between a phosphorylated peptide (GK14-P) and the BRCT domain were identified and crafted onto a 14-mer β-hairpin template in silico. Several cyclic peptides models were designed and their binding towards the target peptide and other phosphorylated peptides evaluated through virtual screening. Selected cyclic peptides were then synthesized, purified and characterized. The high affinity and selectivity of the lead cyclic peptide towards the target phosphopeptide was confirmed, and the possibility to capture it using affinity chromatography demonstrated. This work paves the way for the development of cyclic β-hairpin peptidomimetics as a novel class of affinity reagents for the highly selective identification and capture of target molecules.

Electronic noses (E-noses), are usually composed by an array of sensors with different selectivities towards classes of VOCs (Volatile Organic Compounds). These devices have been applied to a variety of fields, including environmental protection, public safety, food and beverage industries, cosmetics, and clinical diagnostics. This work demonstrates that it is possible to classify eleven VOCs from different chemical classes using a single gas sensing biomaterial that changes its optical properties in the presence of VOCs. To accomplish this, an in-house built E-nose, tailor-made for the novel class of gas sensing biomaterials, was improved and combined with powerful machine learning techniques. The device comprises a delivery system, a detection system and a data acquisition and control system. It was designed to be stable, miniaturized and easy-to-handle. The data collected was pre-processed and features and curve fitting parameters were extracted from the original response. A recursive feature selection method was applied to select the best features, and then a Support Vector Machine classifier was implemented to distinguish the eleven distinct VOCs. The results show that the followed methodology allowed the classification of all the VOCs tested with 94.6% (± 0.9%) accuracy.

The purpose of this work was the development of a scalable and easy-to-use electronic noses (E-noses) system architecture for volatile organic compounds sensing, towards the final goal of using several E-noses acquiring large datasets at the same time. In order to accomplish this, each E-nose system is comprised by a delivery system, a detection system and a data acquisition and control system. In order to increase the scalability, the data is stored in a database common to all E-noses. Furthermore, the system was designed so it would only require five simple steps to setup a new E-nose if needed, since the only parameter that needs to be changed is the ID of the new E-nose. The user interacts with a node using an interface, allowing for the control and visualization of the experiment. At this stage, there are three different E-nose prototypes working with this architecture in a laboratory environment.

Electronic noses (e-noses) mimic human olfaction, by identifying Volatile Organic Compounds (VOCs). This
work presents a novel approach that successfully classifies 11 known VOCs using the signals generated by
sensing gels in an in-house developed e-nose. The proposed signals’ analysis methodology is based on the
generated signals’ morphology for each VOC since different sensing gels produce signals with different shapes
when exposed to the same VOC. For this study, two different gel formulations were considered, and an average
f1-score of 84% and 71% was obtained, respectively. Moreover, a standard method in time series classification
was used to compare the performances. Even though this comparison reveals that the morphological approach
is not as good as the 1-nearest neighbour with euclidean distance, it shows the possibility of using descriptive
sentences with text mining techniques to perform VOC classification.

The materials described in this work result from the selfassembly of liquid crystals and ionic liquids into droplets,
stabilized within a biopolymeric matrix. These systems are
extremely versatile gels, in terms of composition, and offer
potential for fine tuning of both structure and function, as
each individual component can be varied. Here, the
characterization and application of these gels as sensing thin
films in gas sensor devices is presented. The unique
supramolecular structure of the gels is explored for molecular
recognition of volatile organic compounds (VOCs) by
employing gels with distinct formulations to yield
combinatorial optical and electrical responses used in the
distinction and identification of VOCs.