Methanosarcina barkeri ferredoxin was purified and characterized by electron paramagnetic resonance (EPR) and Mossbauer spectroscopy. The purification procedure included chromatographic steps on DEAE-cellulose and gel filtration. The isolated protein is unstable under aerobic conditions. The ferredoxin exhibits charge transfer bands at 283 nm and 405 nm with an absorption ratio A405/A283 = 0.73. Its molecular weight has been estimated to be 20000-22000 by gel filtration chromatography. The native ferredoxin exhibits an intense EPR signal at g = 2.02 and only a very weak g = 1.94 signal develops upon reduction with dithionite. The Mossbauer spectra of the reduced protein are characteristic of a [3Fe-3S] center. The combined EPR and Mossbauer studies show that M. barkeri ferredoxin contains only [3Fe-3S] clusters, similar to Azotobacter vinelandii Fd[Emptage, M.H., Kent, T.A., Huynh, B.H., Rawlings, J., Orme-Johnson, W.H. & Munck, M. (1980) J. Biol. Chem. 255, 1793-1796], Desulfovibrio gigas FdII [Huynh, B.H., Moura, J.J.G., Moura, I., Kent, T.A., LeGall, J., Xavier, A.V. & Munck, E. (1980) J. Biol. Chem. 255, 3242-3244] and mitochondrial beef heart aconitase [Kent, T.A., Dreyer, J.-L., Kennedy, M.C., Huynh, B.H., Emptage, M.H., Beinert, H. & Munck, E. (1982) Proc. Natl Acad. Sci. USA, 79, 1096-1100].

A new type of non-heme iron protein was purified to homogeneity from extracts of Desulfovibrio desulfuricans (ATCC 27774) and Desulfovibrio vulgaris (strain Hildenborough). This protein is a monomer of 16-kDa containing two iron atoms per molecule. The visible spectrum has maxima at 495, 368, and 279 nm and the EPR spectrum of the native form shows resonances at g = 7.7, 5.7, 4.1 and 1.8 characteristic of a high-spin ferric ion (S = 5/2) with E/D = 0.08. Mossbauer data indicates the presence of two types of iron: an FeS4 site very similar to that found in desulforedoxin from Desulfovibrio gigas and an octahedral coordinated high-spin ferrous site most probably with nitrogen/oxygen-containing ligands. Due to this rather unusual combination of active centers, this novel protein is named desulfoferrodoxin. Based on NH2-terminal amino acid sequence determined so far, the desulfoferrodoxin isolated from D. desulfuricans (ATCC 27774) appears to be a close analogue to a recently discovered gene product from D. vulgaris (Brumlik, M.J., and Voordouw, G. (1989) J. Bacteriol. 171, 49996-50004), which was suggested to be a rubredoxin oxidoreductase. However, reduced pyridine nucleotides failed to reduce the desulforedoxin-like center of this new protein.

An EPR redox titration was performed on the tetraheme cytochrome c3 isolated from Desulfovibrio baculatus (strain 9974), a sulfate-reducer. Using spectral differences at different poised redox states of the protein, it was possible to individualize the EPR g-values of each of the four hemes and also to determine the mid-point redox potentials of each individual heme: heme 4 (-70 mV) at gmax = 2.93, gmed = 2.26 and gmin = 1.51; heme 3 (-280 mV) at gmax = 3.41; heme 2 (-300 mV) at gmax = 3.05, gmed = 2.24 and gmin = 1.34; and heme 1 (-355 mV) at gmx = 3.18. A previously described multi-redox equilibria model used for the interpretation of NMR data of D. gigas cytochrome c3 [Santos, H., Moura, J.J.G., Moura, I., LeGall, J. & Xavier, A. V. (1984) Eur. J. Biochem. 141, 283-296] is discussed in terms of the EPR results.

Metalloenzymes control enzymatic activity by changing the characteristics of the metal centers where catalysis takes place. The conversion between inactive and active states can be tuned by altering the coordination number of the metal site, and in some cases by an associated conformational change. These processes will be illustrated using heme proteins (cytochrome c nitrite reductase, cytochrome c peroxidase and cytochrome cd1 nitrite reductase), non-heme proteins (superoxide reductase and [NiFe]-hydrogenase), and copper proteins (nitrite and nitrous oxide reductases) as examples. These examples catalyze electron transfer reactions that include atom transfer, abstraction and insertion.

Molybdenum and tungsten are second- and third-row transition elements, respectively, which are found in a mononuclear form in the active site of a diverse group of enzymes that generally catalyze oxygen atom transfer reactions. Mononuclear Mo-containing enzymes have been classified into three families: xanthine oxidase, DMSO reductase, and sulfite oxidase. The proteins of the DMSO reductase family present the widest diversity of properties among its members and our knowledge about this family was greatly broadened by the study of the enzymes nitrate reductase and formate dehydrogenase, obtained from different sources. We discuss in this review the information of the better characterized examples of these two types of Mo enzymes and W enzymes closely related to the members of the DMSO reductase family. We briefly summarize, also, the few cases reported so far for enzymes that can function either with Mo or W at their active site.

Potentiometric titration followed by e.p.r. measurements were used to determine the midpoint reduction potentials of the redox centres of a molybdenum-containing iron-sulphur protein previously isolated from Desulfovibrio gigas, a sulphate-reducing bacterium (Moura, Xavier, Bruschi, Le Gall, Hall & Cammack (1976) Biochem. Biophys. Res. Commun. 728 782-789; Moura, Xavier, Bruschi, Le Gall & Cabral (1977) J. Less Common Metals 54, 555-562). The iron-sulphur centres could readily be distinguished into three types by means of g values, temperature effect, oxidation-reduction potential values and reduction rates. The type-I Fe-S centres are observed at 77 K. They show mid-point potential values of -260mV (Fe-S type IA) and -440 mV (Fe-S type IB). Centres of types IA and IB appear to have similar spectra at 77 K and 24 K. The Fe-S type-II centres are only observed below 65 K and have a midpoint potential of -28mV. Long equilibration times (30 min) with dye mediators under reducing conditions were necessary to observe the very slow equilibrating molybdenum signals. The potential values associated with this signal were estimated to be approx. -415 mV for Mo(VI)/Mo(V) and-530mV for Mo(V)/Mo(IV).

Formate dehydrogenases (FDHs) are enzymes that catalyze the formate oxidation to carbon dioxide and that contain either Mo or W in a mononuclear form in the active site. In the present work, the influence of Mo and W salts on the production of FDH by Desulfovibrio alaskensis NCIMB 13491 was studied. Two different FDHs, one containing W (W-FDH) and a second incorporating either Mo or W (Mo/W-FDH), were purified. Both enzymes were isolated from cells grown in a medium supplemented with 1 muM molybdate, whereas only the W-FDH was purified from cells cultured in medium supplemented with 10 muM tungstate. We demonstrated that the genes encoding the Mo/W-FDH are strongly downregulated by W and slightly upregulated by Mo. Metal effects on the expression level of the genes encoding the W-FDH were less significant. Furthermore, the expression levels of the genes encoding proteins involved in molybdate and tungstate transport are downregulated under the experimental conditions evaluated in this work. The molecular and biochemical properties of these enzymes and the selective incorporation of either Mo or W are discussed.

Metal-dependent formate dehydrogenases (Fdh) from prokaryotic organisms are members of the dimethyl sulfoxide reductase family of mononuclear molybdenum-containing and tungsten-containing enzymes. Fdhs catalyze the oxidation of the formate anion to carbon dioxide in a redox reaction that involves the transfer of two electrons from the substrate to the active site. The active site in the oxidized state comprises a hexacoordinated molybdenum or tungsten ion in a distorted trigonal prismatic geometry. Using this structural model, we calculated the catalytic mechanism of Fdh through density functional theory tools. The simulated mechanism was correlated with the experimental kinetic properties of three different Fdhs isolated from three different Desulfovibrio species. Our studies indicate that the C-H bond break is an event involved in the rate-limiting step of the catalytic cycle. The role in catalysis of conserved amino acid residues involved in metal coordination and near the metal active site is discussed on the basis of experimental and theoretical results.

The kinetics of electron transfer between the Desulfovibrio gigas hydrogenase and several electron-transfer proteins from Desulfovibrio species were investigated by cyclic voltammetry, square-wave voltammetry and chronoamperometry. The cytochrome c3 from Desulfovibrio vulgaris (Hildenborough), Desulfovibrio desulfuricans (Norway 4), Desulfovibrio desulfuricans (American Type Culture Collection 27774) and D. gigas (NCIB 9332) were used as redox carriers. They differ in their redox potentials and isoelectric point. Depending on the pH, all the reduced forms of these cytochromes were effective in electron exchange with hydrogenase. Other small electron-transfer proteins such as ferredoxin I, ferredoxin II and rubredoxin from D. gigas were tentatively used as redox carriers. Only ferredoxin II was effective in mediating electron exchange between hydrogenase and the working electrode. The second-order rate constants k for the reaction between reduced proteins and hydrogenase were calculated based on the theory of the simplest electrocatalytic mechanism [Moreno, C., Costa, C., Moura, I., Le Gall, J., Liu, M. Y., Payne, W. J., van Dijk, C. & Moura, J. J. G. (1993) Eur. J. Biochem. 212, 79-86] and the results obtained by cyclic voltammetry were compared with those obtained by chronoamperometry. Values for k of 10(5)-10(6) M-1 s-1 (cytochrome c3 as electron carrier) and 10(4) M-1 s-1 (ferredoxin II as the electron carrier) were determined. The rate-constant values are discussed in terms of the existence of an electrostatic interaction between the electrode surface and the redox carrier and between the redox carrier and a positively charged part of the enzyme.

The electron-transfer kinetics between three different mediators and the hexahemic enzyme nitrite reductase isolated from Desulfovibrio desulfuricans (ATCC 27774) were investigated by cyclic voltammetry and by chronoamperometry. The mediators, methyl viologen, Desulfovibrio vulgaris (Hildenborough) cytochrome c3 and D. desulfuricans (ATCC 27774) cytochrome c3 differ in structure, redox potential and charge. The reduced form of each mediator exchanged electrons with nitrite reductase. Second-order rate constants, k, were calculated on the basis of the theory for a simple catalytic mechanism and the results, obtained by cyclic voltammetry, were compared with those obtained by chronoamperometry. Values for k are in the range 10(6)-10(8) M-1 s-1 and increase in the direction D. desulfuricans cytochrome c3-->D. vulgaris cytochrome c3-->methyl viologen. An explanation is advanced on the basis of electrostatic interactions and relative orientation between the partners involved. Chronoamperometry (computer controlled) offers advantages over cyclic voltammetry in the determination of homogeneous rate constants (faster, more accurate and better reproducibility). Direct, unmediated electrochemical responses of the hexaheme nitrite reductase were also reported.

The direct unmediated electrochemical response of the tetrahemic cytochrome c3 isolated from sulfate reducers Desulfovibrio baculatus (DSM 1743) and D. vulgaris (strain Hildenborough), was evaluated using different electrode systems [graphite (edge cut), gold, semiconductor (InO2) and mercury)] and different electrochemical methods (cyclic voltammetry and differential pulse voltammetry). A computer program was developed for the theoretical simulation of a complete cyclic voltammetry curve, based on the method proposed by Nicholson and Shain [Nicholson, R.S. & Shain, I. (1964) Anal. Chem. 36, 706-723], using the Gauss-Legendre method for calculation of the integral equations. The experimental data obtained for this multi-redox center protein was deconvoluted in to the four redox components using theoretically generated cyclic voltammetry curves and the four mid-point reduction potentials determined. The pH dependence of the four reduction potentials was evaluated using the deconvolution method described.

The same polypeptide chain (58 amino acids, 6 cysteines) is used to build up two ferredoxins in Desulfovibrio gigas a sulfate reducing organism. Ferredoxin II (FdII) contains a single [Fe3S4] core and ferredoxin I (FdI) mainly a [Fe4S4] core. The [Fe3S4] core can readily be interconverted into a [Fe4S4] complex (J.J.G. Moura, I. Moura, T.A. Kent, J.D. Lipscomb, B.H. Huynh, J. LeGall, A.V. Xavier, and E. Munck, J. Biol. Chem. 257, 6259 (1982)). This interconversion process suggested that the [Fe3S4] core could be used as a synthetic precursor for the formation of heterometal clusters. Co, Zn, Cd, and Ni derivatives were produced (I. Moura, J.J.G. Moura, E. Munck, V. Papaephthymiou, and J. LeGall, J. Am. Chem. Soc. 108, 349 (1986), K. Sureurs, E. Munck, I. Moura, J.J.G. Moura, and J. LeGall, J. Am. Chem. Soc. 109, 3805 (1986), and A.L. Macedo, I. Moura, J.J.G. Moura, K. Surerus, and E. Munck, unpublished results). The redox properties of a series of heterometal clusters (MFe3S4] are assessed using direct electrochemistry (square wave voltammetry--SWV) promoted by Mg(II) at a glassy carbon electrode (derivatives: Cd (-495 mV), Fe (-420 mV), Ni (-360 mV), and Co (-245 mV) vs normal hydrogen electrode (NHE)). In parallel, the electrochemical behavior (cyclic voltammetry--CV, differential pulse voltammetry--DPV and SWV) of FdI and FdII were investigated as well as the cluster interconversion process. In addition to the +1/0 (3Fe cluster) and +2/+1 (4Fe cluster) redox transitions, a very negative redox step, at -690 mV, was detected for the 3Fe core, reminiscent of a postulated further 2e- reduction step, as proposed for D. africanus ferredoxin III by F.A. Armstrong, S.J. George, R. Cammack, E.C. Hatchikian, and A.J. Thomson, Biochem. J. 264, 265 (1989). The electrochemical redox potential values are compared with those determined by independent methods (namely by electron paramagnetic resonance (EPR) and visible spectroscopy).

The combination of docking algorithms with NMR data has been developed extensively for the studies of protein-ligand interactions. However, to extend this development for the studies of protein-protein interactions, the intermolecular NOE constraints, which are needed, are more difficult to access. In the present work, we describe a new approach that combines an ab initio docking calculation and the mapping of an interaction site using chemical shift variation analysis. The cytochrome c553-ferredoxin complex is used as a model of numerous electron-transfer complexes. The 15N-labeling of both molecules has been obtained, and the mapping of the interacting site on each partner, respectively, has been done using HSQC experiments. 1H and 15N chemical shift analysis defines the area of both molecules involved in the recognition interface. Models of the complex were generated by an ab initio docking software, the BiGGER program (bimolecular complex generation with global evaluation and ranking). This program generates a population of protein-protein docked geometries ranked by a scoring function, combining relevant stabilization parameters such as geometric complementarity surfaces, electrostatic interactions, desolvation energy, and pairwise affinities of amino acid side chains. We have implemented a new module that includes experimental input (here, NMR mapping of the interacting site) as a filter to select the accurate models. Final structures were energy minimized using the X-PLOR software and then analyzed. The best solution has an interface area (1037.4 A2) falling close to the range of generally observed recognition interfaces, with a distance of 10.0 A between the redox centers.

Fe-hydrogenase is a 54-kDa iron-sulfur enzyme essential for hydrogen cycling in sulfate-reducing bacteria. The x-ray structure of Desulfovibrio desulfuricans Fe-hydrogenase has recently been solved, but structural information on the recognition of its redox partners is essential to understand the structure-function relationships of the enzyme. In the present work, we have obtained a structural model of the complex of Fe-hydrogenase with its redox partner, the cytochrome c(553), combining docking calculations and NMR experiments. The putative models of the complex demonstrate that the small subunit of the hydrogenase has an important role in the complex formation with the redox partner; 50% of the interacting site on the hydrogenase involves the small subunit. The closest contact between the redox centers is observed between Cys-38, a ligand of the distal cluster of the hydrogenase and Cys-10, a ligand of the heme in the cytochrome. The electron pathway from the distal cluster of the Fe-hydrogenase to the heme of cytochrome c(553) was investigated using the software Greenpath and indicates that the observed cysteine/cysteine contact has an essential role. The spatial arrangement of the residues on the interface of the complex is very similar to that already described in the ferredoxin-cytochrome c(553) complex, which therefore, is a very good model for the interacting domain of the Fe-hydrogenase-cytochrome c(553).

The aldehyde oxidoreductase from Desulfovibrio gigas belongs to the family of molybdenum hydroxylases. Besides a molybdenum cofactor which constitutes their active site, these enzymes contain two [2Fe-2S](2+,1+) clusters which are believed to transfer the electrons provided by the substrate to an acceptor which is either a FAD group or an electron-transferring protein. When the three metal centers of D. gigas AOR are simultaneously paramagnetic, splittings due to intercenter spin-spin interactions are visible when the EPR spectra are recorded at low temperatures. By studying quantitatively these interactions with a model based on the X-ray crystal structure, which takes into consideration the interactions between the magnetic moments carried by all the metal sites of the system, it is possible to determine the location of the reducible sites of the [2Fe-2S] clusters. When combined with the electron-transfer pathways proposed on the basis of the X-ray crystal structure, the results provide a detailed description of the electron-transfer system of D. gigas AOR.

The three-dimensional X-ray structure of cytochrome c3 from a sulfate reducing bacterium, Desulfovibrio desulfuricans ATCC 27774 (107 residues, 4 heme groups), has been determined by the method of molecular replacement [Frazao et al. (1994) Acta Crystallogr. D50, 233-236] and refined at 1.75 A to an R-factor of 17.8%. When compared with the homologous proteins isolated from Desulfovibrio gigas, Desulfovibrio vulgaris Hildenborough, Desulfovibrio vulgaris Miyazaki F, and Desulfomicrobium baculatus, the general outlines of the structure are essentialy kept [heme-heme distances, heme-heme angles, His-His (axial heme ligands) dihedral angles, and the geometry of the conserved aromatic residues]. The three-dimensional structure of D. desulfuricans ATCC 27774 cytochrome c3Dd was modeled on the basis of the crystal structures available and amino acid sequence comparisons within this homologous family of multiheme cytochromes [Palma et al. (1994) Biochemistry 33, 6394-6407]. This model is compared with the refined crystal structure now reported, in order to discuss the validity of structure prediction methods and critically evaluate the steps used to predict protein structures by homology modeling. The four heme midpoint redox potentials were determined by using deconvoluted electron paramagnetic resonance (EPR) redox titrations. Structural criteria (electrostatic potentials, heme ligand orientation, EPR g values, heme exposure, data from protein-protein interaction studies) are invoked to assign the redox potentials corresponding to each specific heme in the three-dimensional structure.

The authors report the case of a 39-year-old male patient who had an ischemic stroke (complete infarction of right anterior cerebral circulation) and an acute myocardial infarction during the same year. Molecular study revealed he was homozygous for the 677C-->T mutation in the gene coding for methylenetetrahydrofolate reductase, a key enzyme of folate metabolism; deficiency of this enzyme is associated with increased cardiovascular risk and neurological lesions. Some considerations are put forward about hyperhomocysteinemia and the MTHFR 677C-->T mutation as cardiovascular risk factors.

The diheme cytochrome c peroxidase from Paracoccus denitrificans was modified with the histidine-specific reagent diethyl pyrocarbonate. At low excess of reagent, 1 mol of histidine was modified in the oxidized enzyme, and modification was associated with loss of the ability to form the active state. With time, the modification reversed, and the ability to form the active state was recovered. The agreement between the spectrophotometric measurement of histidine modification and radioactive incorporation using a radiolabeled reagent indicated little modification of other amino acids. However, the reversal of histidine modification observed spectrophotometrically was not matched by loss of radioactivity, and we propose a slow transfer of the ethoxyformyl group to an unidentified amino acid. The presence of CN- bound to the active peroxidatic site of the enzyme led to complete protection of the essential histidine from modification. Limited subtilisin treatment of the native enzyme followed by tryptic digest of the C-terminal fragment (residues 251-338) showed that radioactivity was located in a peptide containing a single histidine at position 275. We propose that this conserved residue, in a highly conserved region, is central to the function of the active mixed-valence state.