A fast method is presented to fabricate plasmonic light trapping structures in just ten minutes (>5 × faster than the present state of art), with excellent light scattering properties. The structures are composed of silver nanoparticles (Ag NPs) deposited by thermal evaporation and self-assembled using a rapid thermal annealing (RTA) system. The effect of the RTA heating rate on the NPs production reveals to be crucial to the decrease of the annealing process. The Ag NPs are integrated in thin film silicon solar cells to form a plasmonic back reflector (PBR) that causes a diffused light reflectivity in the near-infrared (600–1100 nm wavelength region). In this configuration the thicknesses of the AZO spacer/passivating layers between NPs and rear mirror, and between NPs and silicon layer, play critical roles in the near-field coupling of the reflected light towards the solar cell absorber, which is investigated in this work. The best spacer thicknesses were found to be 100 and 60 nm, respectively, for Ag NPs with preferential sizes of about 200 nm. The microcrystalline silicon (μc-Si:H) solar cells deposited on such improved PBR demonstrate an overall 11% improvement on device efficiency, corresponding to a photocurrent of 24.4 mA/cm2 and an efficiency of 6.78%, against 21.79 mA/cm2 and 6.12%, respectively, obtained on flat structures without NPs.

In recent years, the discovery of the excellent optical and electrical properties of perovskite solar cells (PSCs) made them a main focus of research in photovoltaics, with efficiency records increasing astonishingly fast since their inception. However, problems associated with the stability of these devices are hindering their market application. UV degradation is one of the most severe issues, chiefly caused by TiO2’s photogenerated electrons that decompose the perovskite absorber material, coupled with the additional intrinsic degradation of this material under UV exposure. The solution presented here can minimize this effect while boosting the cells’ generated photocurrent, by making use of combined light-trapping and luminescent down-shifting effects capable of changing the harmful UV radiation to higher wavelengths that do not affect the stability and can be effectively “trapped” in the cell. This work focuses in the optimization of the photocurrent gains that can be attained by emulating the changed spectrum resulting from applying down-shifting media as encapsulant in photonic-enhanced PSCs, as well as the reduction in the harmful effects of UV radiation on the devices. Such optimized photonic solution allows current enhancement while reducing the harmful UV photocarrier generation both in the TiO2 (by 1 order of magnitude) and in the perovskite (by 80%) relative to a standard PSC without light management.